Server Side Vlan Tab; Server-Side Vlan - Cisco WS-C3550-12G User Manual
User guide
Hide thumbs
Also See for WS-C3550-12G:
- Software configuration manual (798 pages) ,
- Manual (278 pages) ,
- Datasheet (19 pages)
Table of Contents
Advertisement
Chapter 7
Module and Port Adapter Management
•
Server Side VLAN Tab
The following areas are available on the Server Side VLAN tab of the SLB Module Management
window:
•
•
Server–Side VLAN
The Server Side VLAN area provides the following information:
•
•
•
OL-4930-01
Gateway Add—Adds the default gateway specified by the Gateway field and the Client Side VLAN
field. You need to specify a VLAN in the Client Side VLAN field and an IP address in the Gateway
field for the action to take effect.
Server-Side VLAN
Server VLAN Config
Server–Side VLAN Table—Identifies the server VLANs used by the CSM. These are the VLANs
on the device to which servers will connect. The following attributes are displayed for the selected
server VLANs in the table:
IP Address—IP address of the server VLAN.
–
Netmask—Subnet mask of the server VLAN IP address. Enabled bits indicate network
–
addressing bits in the IP address.
Server Side VLAN Alias Table—Describes the aliases of a server VLAN. If the CSM is in a different
subnet from the real servers, aliases may be used to eliminate the need for a router. Only used in
server mode. There may be multiple aliases associated with each server VLAN. The following
attributes are displayed in the table:
Server Side VLAN—Unique identifier of a server VLAN on the device.
–
IP Address—IP address of the server VLAN.
–
Netmask—Subnet mask of the server VLAN alias IP address. Enabled bits indicate network
–
addressing bits in the IP address.
Server Side VLAN Static Route Table—Describes the static routes of a server VLAN. A static route
is configured to reach a real server if it is more than one network hop away from the CSM. There
may be multiple static routes configured for a server VLAN. The following attributes are displayed
in the table:
–
Server Side VLAN—Unique identifier of a server VLAN on the device.
Destination Network—IP address of network on the server VLAN.
–
Destination Netmask—Subnet mask of the network on the server VLAN. Enabled bits indicate
–
network addressing bits in the IP address.
Gateway—Default gateway of a server VLAN. A router to the client VLAN must have this
–
gateway address configured and real servers must point their gateways to this address.
SLB Module Management Window
Cisco Catalyst Switch Manager User Guide
7-23
Advertisement
Table of Contents
Troubleshooting
