Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Information
Advertisement
Table of Contents
Related Manuals for AEG 1610
Summary of Contents for AEG 1610
- Page 1 ÖKO-LAVAMAT LAVALOGIC 1610 Washing Machine User information...
- Page 2 Dear Customer, Please read this user information carefully and keep it to refer to later. Please pass the user information on to any future owner of the appli- ance. The following symbols are used in the text: Safety instructions Warning! Information that affects your personal safety. Important! Information that prevents damage to the appliance.
-
Page 3: Table Of Contents
Contents Operating Instructions Safety ............Disposal . - Page 4 Child safety device..........25 Cleaning and care .
-
Page 5: Operating Instructions
Operating Instructions 1 Safety Prior to using the appliance for the first time • Follow the “Installation and connection instructions”. • If the appliance is delivered in the winter months when there are mi- nus temperatures: store the washing machine at room temperature for 24 hours before using for the first time. -
Page 6: Disposal
• Switch off the washing machine prior to cleaning it and carrying out maintenance. In addition, remove the power plug from the power point or – if the appliance has been hard-wired – switch off the cut- out in the fuse box or completely remove the fuse. •... -
Page 7: Switching On The Appliance For The First Time - Setting The Language
Switching on the appliance for the first time – setting the language When switching on the appliance for the first time you should be sure to set the language in which you want the indicators in the display to appear. 1. -
Page 8: Description Of The Appliance
Description of the appliance Drawer for detergent and conditioner Screw feet (height adjustable); rear left: automatically adjusting foot Control panel with display Buttons Indicators in the display Information panel shows programme, temperature and spin speed Symbol row shows options selected and extras Control panel with display LINEN/EASY-C. -
Page 9: Main Control Features
Main control features Control knob Switching the appliance on and off Press the control knob to switch the appliance on and off. Highlighting You can highlight the entries on the right of the display by turning the control knob. Cancelling settings If you would like to cancel settings that have been made by mistake, switch the appliance off and on again using the control knob. -
Page 10: Programme Overview
Programme overview Programme LINEN/EASY-CARES 60, 50, 40, 30, COLD ENERGY SAVING COTTONS 95 DELICATES 40, 30, COLD WOOL (Handwash) 40, 30, COLD SILK (Handwash) 30 LINGERIE 40 40 -60 MIX EASY IRON 60, 50, 40, 30, COLD REFRESH 30 FASHION 40 1) A 10 litre bucket contains approximately 2.5 kg of dry washing (cotton). - Page 11 General programme for coloured and easy-care items made of cotton/linen as well as for easy-care mixed fibres and synthetics. The wash programme is adjust- ed according to the different fabric types and load sizes. If loading only with easy-care washing, do not load more than 3 kg. Energy-saving and water-saving programme which washes at 60°C for lightly to normally soiled whites/coloureds made of cotton/linen.
- Page 12 Programme SHORT SPIN SPIN STARCH DRAIN 1) A 10 litre bucket contains approximately 2.5 kg of dry washing (cotton). Options TIME SAVING • • • • Spin speed • • • • • • • • • • •...
- Page 13 Drain and short spin after a rinse hold, or separate short spin of handwashed del- icates, woollens, silk. Drain and spin, e.g. after a rinse hold, or separate spin for hand-washed cottons/ linens and easy-cares. Separate starching, conditioning, stiffening, treating of damp washing. Draining of the water after a rinse hold.
-
Page 14: Before The First Wash
Before the first wash Setting the time So that the current time and the end of the programme are correctly displayed, please check the display and set the current time, if neces- sary. (See “Setting extra options: Timer”.) Carrying out a wash programme prior to first use Before doing your first wash, run a washing cycle without any washing in the machine (programme LINEN/EASY-C. -
Page 15: Running A Wash Cycle
Running a wash cycle Switching on the appliance Press the control knob. The appliance is now switched on. Before switching the appli- ance on, make sure that the drum is empty. If you do not, the washing will subsequently not be registered properly by the load sensor. Setting a programme 5. -
Page 16: Selecting Options
RINSE HOLD means: the washing is left to soak in the last rinse water and is not spun. If required, set options. Selecting options You can select different options on top of the programme that has been selected. Only options that can be combined with the programme that has already been selected will be offered. -
Page 17: Delay Start
DELAY START 1. Press the OPTIONS key. 2. Use the control knob to highlight DELAY START. 3. Press the SELECT key. 4. Use the control knob to highlight the time at which the programme is to end. 5. Press the SELECT key. The programme end time will change in the information panel. -
Page 18: Opening The Door/Loading The Washing
Opening the door/Loading the washing 1. To open the door: carefully pull the handle on the door. 2. Unfold the washing and load it loosely into the machine. Mix large and small items. Important: Do not get any washing caught between the door and the rubber seal. -
Page 19: Adding Detergent/Conditioner
Adding detergent/conditioner Important: Only use detergents/conditioners that are suitable for use in domestic washing machines. Add detergent/conditioner in accordance with the detergent/condi- tioner manufacturer’s instructions. Observe instructions on the packag- ing. The amount of detergent used depends on: – the washing’s degree of soiling, –... -
Page 20: Starting A Programme
Starting a programme 1. Check that the water tap is open. 2. Press the START key. The wash cycle is started. Programme progress While the programme is running, the display shows among other things: – each stage of the pro- gramme as it progresses, e.g. -
Page 21: Washing Cycle Complete/Removing The Washing
Washing cycle complete/Removing the washing At the end of the programme PLEASE TAKE OUT THE CLOTHES appears in the display. As soon as the opened. 1. Open the door using the handle. 2. Remove the washing. 3. Close the water tap. 4. -
Page 22: Setting Extra Options
Setting extra options Independent of any programme you can set different basic settings. These basic settings will permanently remain active until they are dese- lected again. MEMORY 1, 2, 3, 4 RINSE+ GENTLE SPIN LANGUAGE TIMER VOLUME MEMORY Saving a programme setting First set a programme (e.g. -
Page 23: Clearing A Stored Programme Setting
4. Highlight the SENSITIVE op- tion. 5. Press the SELECT key. symbol will appear in the display. 6. Press the EXTRAS key. MEMORY is highlighted: 7. Press the SELECT key. If MEMORY 1 is highlighted: 8. Press the SAVE key. The programme setting is stored as M1: LINEN/EASY-C. -
Page 24: Rinse+, Gentle Spin
RINSE+, GENTLE SPIN 1. Press the OPTIONS key. 2. Press the EXTRAS key. 3. Use the control knob to highlight the desired Extra, e.g. RINSE+. 4. Press the SELECT key. symbol appears in the display. 5. Press the BACK key twice. LANGUAGE 1. -
Page 25: Volume
VOLUME 1. Press the OPTIONS key. 2. Press the EXTRAS key. 3. Use the control knob to highlight VOLUME. 4. Press the SELECT key. 5. Use the control knob to highlight OFF, NORMAL or LOUD. 6. Press the SELECT key. 7. -
Page 26: Cleaning And Care
Cleaning and care Important: Do not use furniture cleaning products or aggressive clean- ing agents to clean the appliance. Wipe over the control panel and housing with a damp cloth. Detergent drawer The detergent drawer should be cleaned regularly. 1. Remove the detergent drawer by pulling firmly. 2. -
Page 27: What To Do If
What to do if... Remedying small malfunctions yourself If one of the following fault messages is shown in the display during operation: – ATTENTION (E41)/PLEASE CLOSE THE DOOR – ATTENTION ERROR CODE (E11)/PLEASE OPEN THE TAP – ATTENTION ERROR CODE (E21)/PLEASE CHECK THE WATER DRAIN- please refer to the following table. - Page 28 Problem The washing machine vibrates when operat- ing or is not stable. Water is leaking out from under the washing machine. Softener was not washed in. compart- ment for conditioners is filled with water. Washing is heavily creased. The door cannot be opened when the ap- pliance is switched on.
-
Page 29: If The Wash Result Is Not Satisfactory
Problem Water is not entering the appliance. ATTEN- TION ERROR CODE (E11)/PLEASE OPEN THE WATER TAP ap- pears in the display. The washing has not been spun thoroughly and water remains visi- ble in the drum. ATTENTION ERROR CODE (E21)/PLEASE CHECK THE WATER DRAINAGE appears in the display. -
Page 30: Carrying Out An Emergency Drain
Carrying out an emergency drain Warning! Prior to carrying out an emergency drain, switch off the washing machine and remove the power plug from the power point. Warning! The water that comes out of the emergency drain hose may be hot. There is a risk of scalding. Let the water cool before performing an emergency drain! 1. -
Page 31: Drain Pump
Drain pump The drain pump is maintenance-free. It is only necessary to open the pump cover if there is a malfunction and water is no longer being pumped out, e.g. if the pump wheel is blocked. Before loading the machine, please always ensure that there are no for- eign bodies present in the pockets or in between the items to be washed. -
Page 32: Technical Data
Technical data This appliance conforms with the following EU Directives: – 73/23/EEC dated 19.02.1973 Low Voltage Directive – 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending Directive 92/31/EEC – 93/68/EEC dated 22.07.1993 CE Marking Directive Height x width x depth Depth when door is open Height adjustability Load (depending on programme) -
Page 33: Installation And Connection Instructions
Installation and connection instructions 1 Safety information concerning installation • This washing machine cannot be built-in. • Before using for the first time, check the appliance for damage sus- tained while it was being transported. Do not under any circumstanc- es connect an appliance that is damaged to the mains. -
Page 34: Installing The Appliance
Installing the appliance Transporting the appliance Warning: The washing machine is very heavy. There is a risk of injury. Exercise care when lifting the appliance. • Do not lay the washing machine on its front nor on its right side (as seen from the front). -
Page 35: Where To Install
Special spanner A and sealing caps B (2 units) and C (1 unit) come with the appliance. 3. Use special spanner A to remove screw D and the compression spring. 4. Use sealing cap C to cap the hole. 5. Use special spanner A to remove the two screws E. -
Page 36: Making The Appliance Level
Making the appliance level Automatic adjusting foot: The rear foot on the left-hand side of your washing machine is built as a shock absorbing foot. This guarantees that the appliance does not move even at high spin speeds. The four feet of the appliance are pre-adjusted. -
Page 37: Permanent Connection
Should the plug need to be replaced for any reason, proceed as described below. The wires in the mains lead are coloured in accordance with the following code: Green and Yellow: Blue: Brown: • The wire coloured green and yellow must be connected to the terminal marked with the letter “E“... -
Page 38: Connecting The Appliance To The Water Supply
Connecting the appliance to the water supply Important: • This appliance must not be connected to the hot water supply. • When connecting the appliance, use only new hose kits. • Only connect the appliance to the drinking water supply. Rain water or water for industrial use may only be used if it fulfils the require- ments of DIN1986 and DIN1988. -
Page 39: Water Inlet
Water inlet A 1.35m long pressure hose is supplied with the appliance. If a longer inlet hose is required, only hoses from the manufacturer are to be used. Your local Service Force stocks hose kits of different lengths. Sealing rings are either inserted in the plastic nuts of the threaded hose fitting or are included as spare parts. -
Page 40: Water Drainage
Water Drainage The appliance drain hose should hook into a standpipe, the hook in the drain hose is formed using the plastic “U-Piece“ supplied. The standpipe should have an internal diameter of approximately 38 mm (see dia- gram) thus ensuring there is an air break between the drain hose and standpipe. - Page 41 Pumping heights of over 1 metre The washing machine’s drain pump is able to pump water to a height of 1metre, calculated from the surface on which the appliance is installed. Important! If pumping height is over 1 metre malfunctions and dam- age to the appliance may arise.
-
Page 42: Warranty Conditions
Warranty conditions Great Britain Standard guarantee conditions We, AEG, undertake that if within 12 months of the date of the purchase this AEG appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our discretion repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: •... -
Page 43: Service And Spare Parts
0870 5 929 929 For Customer Service in the Republic of Ireland please contact us at the ad- dress below: AEG/ Electrolux Group (Ire) Ltd Long Mile Road/ Dublin 12 Republic of Ireland Tel: +353 (0) 1 4090751 Email: service.eid@electrolux.ie... - Page 44 From the Electrolux Group. The world´s No.1 choice. The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150 countries around the world.