Table of Contents
Advertisement
PRE-TUNING OF BUILT-IN TV TUNER
VCR
1
Turn on the TV and the VCR, then set the TV to the video programme number.
If you connect the VCR and TV using a 21-pin Scart connector lead, select the 21-pin Scart input of the TV.
2
EJECT
VIDEO LINK
IO IN
3
4
5
6
REC
400x DRIVE
PROG
7
REC
400x DRIVE
PROG
12
TV Screen
M
E
N
U
400x DRIVE
REV I EW
CH
M DE
O
N V I
A
C OCK
L
OK
MENU
SELECT
C
H
P
R
E
S
ET
AUTO
M
A
N
UAL
G
U I
DE
CH
ANN E L
PROG
SELECT
OK
MENU
Cursor
MENU
AUTO
MENU
Press the PLAY/STILL button.
STOP
PLAY/STILL
The test pattern will disappear and the VCR change to the operate mode.
/REW
F.FWD/
TAPE
NAVIGATION
STOP
PLAY/STILL
Press the PROG
/REW
F.FWD/
TAPE
Note: If no channels have been set or a clear picture does not appear,
NAVIGATION
check the aerial or scart connection.
Note: When the pre-tuning of a channel is completed, the current time
may appear in the VCR's display. This is because the auto clock setting
function has operated and the VCR's clock has been set automatically.
(See page 19 for details.)
VCR should display " – – : – – " in it's LCD panel after
the mains supply is connected.
Press the MENU button.
The menu, as illustrated, appears on the TV screen.
Exit
Press the
cursor button to select the CH option, and
press the ENTER button.
The CH PRESET display, as illustrated, will appear on
the TV screen.
Exit
Press the ENTER button to select AUTO.
The display, as illustrated will appear on the TV screen
and "
" will appear in the VCR display.
The VCR will automatically store channels received in
your area. It takes about 3 minutes.
The following stations are stored in programme
Exit
numbers 01 — 05 automatically.
01
BBC1
02
BBC2
03
ITV
04
CH4 (or S4C)
05
CH5
Note: If the station does not transmit a signal which
identifies itself, the station name will not appear.
Tune your TV (consult your TV instruction manual).
The correct tuning position is when the picture is clear.
After this process is complete, the test pattern will
appear on the TV screen, and the RF output channel
will appear in the VCR display.
/
buttons to check the channels you can receive.
- Quick Links:
- Connection
Hide quick links:
Advertisement
Table of Contents
