Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Hitachi L26HP03U
Summary of Contents for Hitachi L26HP03U
- Page 1 Digital LCD Colo ur Television Instructions for use L26HP03U...
-
Page 2: Table Of Contents
Contents Features ..............3 Initial Settings ............20 Accessories ............3 General Operation ..........21 Introduction ............. 4 Information Banner ........... 21 Preparation ............. 4 Electronic Programme Guide (EPG) ....21 Safety Precautions ..........4 Displaying the Subtitles ........22 Power Source ............. - Page 3 Viewing JPG Files ..........32 Name ............38 Slideshow Options ..........32 Move ............38 Video Playback ..........33 Delete .............38 Navigating the Analogue TV Menu System ..33 APS (Auto Programming System) ..38 Analogue TV Menu System ........33 Country ..........38 Picture Menu.............
-
Page 4: Features
Features Accessories • Remote controlled colour LCD TV. • Fully integrated digital TV (DVB-T). • Two HDMI connectors for digital video and audio. This connection is also designed to accept high defi nition signals. • 200 programmes from VHF, UHF. •... -
Page 5: Introduction
Introduction Moisture and Water Thank you for choosing this product. This Do not use this device in manual will guide you in the proper a humid and damp place operation of your TV. Before operating (avoid the bathroom, the the TV, please read this manual sink in the kitchen, and near thoroughly. -
Page 6: Servicing
replacement parts, which are specifi ed by the Disconnecting the Device manufacturer or have the same specifi cations as The mains plug is used to disconnect TV set the original one. Unauthorized substitutions may from the mains and therefore it must remain result in fi... -
Page 7: Overview Of The Remote Control
Overview of the Remote Control Standby Cursor up Cursor right Info Numeric buttons Exit (in DTV mode) Programme up Volume up TV / Digital TV AV / Source Yellow (Feature menu) / Current language Blue (Install menu) / Favourite selection (*) Hold (in TXT mode) / PIP position Update (in TXT mode) / PAP mode Index page / Guide (in DTV mode) -
Page 8: Lcd Tv And Operating Buttons
LCD TV and Operating Buttons FRONT VIEW Standby button TV/AV button Programme Up/ Down buttons Volume Up/Down buttons “ ” Note: Press “ ” buttons at the same time to view main menu. SIDE VIEW REAR VIEW English - 7 -... -
Page 9: Viewing The Connections- Back Connectors
Viewing the Connections- Back Connectors 5Vdc 60mA 1. S/PDIF Digital Out outputs digital audio signals of the currently watched source. Use a digital optic cable to transfer audio signals to a device that has S/PDIF input. 2. Subwoofer Out is for connecting an external, active subwoofer to the set to give a much deeper bass effect. - Page 10 6. Component Video Inputs (YPbPr) are used for connecting component video. You can connect the component video and audio sockets with a device that has component output. Connect the component video cables between the COMPONENT VIDEO INPUTS on on the TV and the component video outputs of your device. While connecting, be sure that the letters on your TV, “...
-
Page 11: Viewing The Connections - Side Connectors
Viewing the Connections - Side Connectors CI Slot is used for inserting a CI card. A CI card allows you to view channels that you subscribe to. For more information, see “Conditional Access” section. Side USB input . Note: Codec update cannot be performed. 3. -
Page 12: Power Connection
Power Connection IMPORTANT : The TV set is designed to operate on 220-240V AC, 50 Hz. • After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains. • Plug the power cable to the mains socket outlet. Aerial Connection •... -
Page 13: Using Digital Multimedia Connectors
Using Digital Multimedia Connectors • You can connect USB devices to your TV by using the USB input of the TV. This feature allows you to display/play JPG and MP3 fi les stored in a USB stick. • It is possible that certain types of USB devices (e.g. MP3 Players) may not be compatible with this TV. -
Page 14: Connecting The Lcd Tv To A Pc
Connecting the LCD TV to a PC For displaying your computer’s screen image on your LCD TV, you can connect your computer to the TV set. • Power off both computer and display before making any connections. • Use 15-pin D-sub display cable to connect a PC to the LCD TV. •... -
Page 15: Connecting To A Dvd Player
Connecting to a DVD Player If you want to connect a DVD player to your LCD TV, you can use connectors on the TV set. DVD players may have different connectors. Please refer to your DVD player’s instruction book for additional information. -
Page 16: Using Side Av Connectors
Using Side AV Connectors You can connect a range of optional equipment to your LCD TV. Possible connections are shown below. Note that cables shown in the illustration are not supplied. • For connecting a camcorder, connect to the VIDEO IN socket and the AUDIO SOCKETS. For selecting the related source, see the section “Input selection”... -
Page 17: Using Other Connectors
Using Other Connectors You can connect a range of optional equipment to your LCD TV. Possible connections are shown below. Note that cables shown in the illustration are not supplied. • Use an audio cable to connect external speakers to your TV. The audio jacks are generally standardized as red and white. -
Page 18: Connecting Other Equipment Via Scart
Connecting Other Equipment via Scart Most devices support SCART connection. You can connect a; DVD recorder, a VCR or a decoder to your LCD TV by using the SCART sockets. Note that cables shown in the illustration are not supplied. Power off both the TV and the devices before making any connections. -
Page 19: Inserting Batteries In The Remote Control Handset
Inserting Batteries in the Switching the TV On/Off Remote Control Handset To Switch the TV On • Remove the battery cover located on the back · Connect the power cord to the 220-240V AC of the handset by gently pulling backwards 50 Hz. -
Page 20: Input Selection
AV Mode Input Selection • Press the “ TV/AV” button in the control panel Once you have connected external equipment on the TV to switch between AV modes. to your TV, you can switch to different input Operation with the Remote Control sources. -
Page 21: Initial Settings
After Automatic Search is completed, the Initial Settings following message asking for analogue channel When the TV set is operated for the fi rst time, search appears on the screen: the IDTV turns on fi rst. Because this is the fi rst time the TV is used, there are no channels stored in the memory. -
Page 22: General Operation
channel. “ Enter PIN” will be displayed on the General Operation screen in such a case: Pressing the “TV/DTV” button at any time while watching television programmes will switch the TV set between the digital terrestrial television broadcasting and normal analogue broadcasting. -
Page 23: Displaying The Subtitles
BLUE button (Next day): displays the Digital teletext is sometimes broadcast at the programmes of the next day. same time with the normal broadcast. INFO (Details): displays the short extended • Press the TELETEXT ( ) button. programmes in detail. •... -
Page 24: Idtv Menu System
To watch a specifi c channel, highlight it using IDTV Menu System “ ” or “ ” button and then press “ OK” button, The IDTV menu can only be viewed when while the “Select” item on Channel List menu is watching digital terrestrial broadcasting. -
Page 25: Renaming Channels
Press the “M” button to cancel the editing or OK button to save the new name. Adding Locks to Channels Channel locking provides a password-protected access to channels selected by parents. In order to lock a channel you should know the parental lock password (default value is set to 0000 in the factory and can only be changed from the Confi... -
Page 26: How To Add A Channel To A Favourites List
How to Add a Channel to a Favourites List Program Guide • By pressing “ ” or “ ” buttons, highlight the This section is same with the instructions given channel that you want to add to the favourite in the General Operations page. Please see list. -
Page 27: Conditional Access
Note: You can set timers for the desired broadcast and • When no module is inserted, “No Conditional time. Recording broadcasts is also possible by using Access module detected” message appears a recording device that you connect to your TV’s Ext on the screen. -
Page 28: Ac3 Audio (*For Eu Countries Only)
not be located while in automatic search or manual search. Use “ ” or “ ” button to select Scan Encrypted and then press “ ” or “ ” button to set this setting as On or Off. Receiver Upgrade Over Air Download (OAD) To ensure that your TV always has the most update information, use this setting. -
Page 29: Parental Control
• After the search progress is completed, the will be updated after exiting ‘Configuration message “ Completed searching for upgrade. Menu’. No new software was found” appears on the Set PIN screen if no new software is found. Use “ ” or “ ” buttons to go to “Set PIN” option. •... -
Page 30: Audio Description
on the screen during the natural pauses in Preferred the audio (and sometimes during dialogue, if These settings will be used if available. deemed necessary). You can use this feature, Otherwise the current settings will be used. only if the broadcaster supports that additional •... -
Page 31: Installation
Installation The Installation menu is mainly intended to help you for creating a Channel Table in the most effi cient way. Select Installation from the Confi guration menu by pressing “ ” or “ ” buttons. This menu includes the following items: •... -
Page 32: First Time Installation
Press OK to cancel. Select Yes by pressing “ ” or “ ” button and press OK to delete all of the channels. Press the OK button to search for analogue channels. The following menu appears on the screen for analogue channel search: First Time Installation The user can use this item to load default settings, which were loaded to the receiver at... -
Page 33: Playing Mp3 Files
Loop (Blue button) : Plays the selected fi le repeatedly. Viewing JPG Files Select YES by pressing “ ” or “ ” button and press OK button. Media browser will be displayed. Jump (Numeric buttons) : jump to selected fi le using the numeric buttons. -
Page 34: Video Playback
Video Playback Navigating the Analogue TV Play (Red button) : Starts the video playback. Menu System Stop (Blue button) : Stops the video playback. Pause (OK button) : Pause the video playback. Rewind (Cursor Left) : Goes backward. • Press “ M” to display the main menu. Forward (Cursor Right) : Goes forward. -
Page 35: Colour Temp
Colour Temp Use “ ” or “ ” buttons, to change picture zoom to Auto, 16:9, 4:3, Panoramic, 14:9, Cinema, Press “ ” or “ ” button to select Colour Temp. Subtitle or Zoom. Press “ ” or “ ” to choose from one of these options: Cool, Normal and Warm . -
Page 36: Balance
Spdif Out Press “ ” or “ ” button to change the preset. In equalizer menu, the preset can be changed Press “ ” or “ ” button to select Spdif Out. to Music, Movie, Speech, Flat, Classic and Press “ ” or “ ” button to set the Spdif Out. User. -
Page 37: Pip-Pap
the following settings will appear on the same Child Lock menu screen. Press “ ” or “ ” button to select Child Lock. Note that if you switch to PAP mode by using Pip-Pap Use “ ” or “ ” button to set the Child Lock On setting, only Source and Swap options will be active or Off. -
Page 38: Teletext Language
Teletext Language Colour System Press “ ” or “ ” button to select Teletext Press “ ” or “ ” button to select Colour System. Language. Use “ ” or “ ” button to change Use “ ” or “ ” button to change the colour Teletext Language to West, East, Turk/Gre , system to PAL,SECAM,PAL60,AUTO,NTSC Cyrillic, Arabic or Persian.. -
Page 39: Store
Store programme list, and the following programmes shift one line up. Press “ ” or “ ” button to select Store Program. Press “ ” or OK button to store the APS (Auto Programming System) settings. “ Stored...” will be displayed on the When you press the BLUE button to start screen. -
Page 40: Source Menu
Source Menu PC Mode Menu System Press “ ” or “ ” button and select the sixth icon. See “Connecting the LCD TV to a PC” section Then press “ ” or OK button. Source menu for connecting a PC to the TV set. appears on the screen: For switching to PC source, press “... -
Page 41: Phase
Select V Position item by using “ ” or “ Displaying TV Information ” button. Use “ ” or “ ” button to adjust the Programme Number, Programme Name, value. Sound Indicator and Zoom Mode information is Phase displayed on the screen when a new programme Depending on the resolution and scan frequency is entered or “INFO”... -
Page 42: Picture Mode Selection
Picture Mode Selection Use to view a normal picture (4:3 aspect ratio) By pressing PP button, you can change Picture as this is its original size. Mode settings in accordance with your viewing requirements. Available options are Dynamic, Natural and Cinema. Note : This function will not be available while in PC mode. -
Page 43: Teletext
Note: You can shift to screen up or down by pressing Your TV supports both FASTEXT and TOP text “ ” / “ ” buttons while picture zoom is selected as systems. When these systems are available, the Auto, Panoramic, 14:9, Cinema, Subtitle or Zoom. pages are divided into groups or topics. -
Page 44: Tips
Sound Tips You can not hear any sound. Did you perhaps Screen Care interrupt the sound, pressing the button? Clean the screen with a slightly damp, soft Sound is coming from only one of the speakers. cloth. Do not use abrasive solvents as they may Is the balance set to one extreme? See Sound damage the coating layer of the TV screen. -
Page 45: Appendix A: Pc Input Typical Display Modes
Appendix A: PC Input Typical Display Modes The display has a maximum resolution of 1920 x 1200 . The following table is an illustration of some of the typical video display modes. Your TV may not support different resolutions. Supported resolution modes are listed below. If you switch your PC to an unsupported mode, a warning OSD will appear on the screen. -
Page 46: Appendix B: Av And Hdmi Signal Compatibility (Input Signal Types)
Appendix B: AV and HDMI Signal Compatibility (Input Signal Types) Source Supported Signals Available PAL 50/60 NTSC 60 EXT-1 (SCART 1) RGB 50 RGB 60 PAL 50/60 NTSC 60 RGB 50 EXT-2 (SCART-2) RGB 60 S-VHS 50 S-VHS 60 PAL 50/60 NTSC 60 480I 60Hz... -
Page 47: Appendix C: Pin Specifi Cations
Appendix C: Pin Specifi cations SCART connector pin specifi cations Input signal Input signal AUDIO OUT (RIGHT) Not used AUDIO IN (RIGHT) RGB-R GND AUDIO OUT (LEFT/MONO) AUDIO GND RGB-R / S.VHS CHROMINANCE IN RGB-B GND BLANKING SIGNAL AUDIO IN (LEFT/MONO) COMPOSITE VIDEO GND RGB-B IN BLANKING SIGNAL GND... -
Page 48: Appendix E: Pip/Pap Mode Combinations
Appendix E: PIP/PAP Mode Combinations DTV/ MAIN Scart1 Scart2 Scart2S HDMI1 HDMI2 YPbPr (RGB) DTV/ Scart1 (RGB) (RGB) (RGB) (RGB) Scart2 (RGB) Scart2S (RGB) (RGB) HDMI1 HDMI2 YPbPr (RGB): This indicates that, selection is possible only if Scart-1 has a RGB signal. Restrictions: Scart-1 source must have RGB signal to perform PIP\PAP with sources TV, Scart-2, Scart-2 S, FAV. -
Page 49: Appendix D: Supported File Formats For Usb Mode
Appendix D: Supported File Formats for USB Mode Format Remarks File Media Extension Video Audio (Maximum resolution/Bit rate etc.) Sample Rate: 8K ~ 48KHz MPEG 1/2 Sample Rate: 8K ~ 48KHz, Bit Rate: .mp3 Layer 1/ 2/ Music 32K~320Kbps 3 (MP3) Sample Rate: 8K ~ 48KHz, Bit Rate: 5K ~ .wma 192Kbps... -
Page 50: Specifi Cations
Specifi cations TV BROADCASTING PAL/SECAM B/G D/K K’ I/I’ L/L’ RECEIVING CHANNELS VHF (BAND I/III) UHF (BAND U) HYPERBAND MHEG-5 ENGINE compliant with ISO/IEC 13522-5 UK engine Profi le 1 for UK Object carousel support compliant with ISO/IEC 135818-6 and UK DTT profi le Frequency range: 474-850 MHz for UK models 170-862 MHz for EU models Digital... -
Page 51: Product Guarantee
Product Guarantee This product is guaranteed against manufacturing defects for a period of 1 Year This does not cover the product where the fault is due to misuse, abuse, use in contravention of the instructions, or where the product has been the subject of unauthorised modifi cations or alterations, or has been the subject of commercial use In the event of a problem with the product within the guarantee period please return it to your nearest store... -
Page 52: Quick Guide
• It is recommended that a scart lead should be fitted between your TV and VCR to enhance your picture and sound quality. Scart leads are essential if you have a stereo TV and VCR and wish to obtain stereo sound from your equipment. These leads can be purchased from your Hitachi dealer or any good High Street electrical retailer. - Page 53 ...or through a HDMI and YP products (DVD-RW) TFT-LCD TV Aerial (RF) Socket • Scart Lead to on TV. (RF) connector lead Device to TV COMPONENT ANTENNA wall socket Aerial (RF) ANT.IN HDMI OUT Lead DVD RECORDER • High Definition Your LCD Television is capable of displaying High Definition pictures from devices such as a High Definition Satellite Receiver or DVD Device.These devices must be connected via the HDMI socket or Component Socket.
-
Page 54: Switch Your Tv On
connect the TV plug to the mains socket UK plug European plug ...and switch on insert plug... insert plug... switch your TV on by setting the on/off button to position | . SIDE VIEW NB: When the set is first switched on, the set will be in standby and the indicator on the front of the set will illuminate red Press Operate/Standby or... -
Page 55: Important Note
start A.P.S. (Auto Programming System) When the TV is turned on for the first time, the menu for the language selection appears on the screen. The messag e “Welc ome please sel ect your language! ! ” is written in all language options sequentially in the menu on the screen. - Page 56 08028 Barcelona Tel: 0049-211-5283-808 SPAIN Fax: 0049-211-5283-809 Hotline: 0180 - 551 25 51 (12ct/min.) Email: Service.germany@hitachi-eu.com HITACHI EUROPE A A B HITACHI EUROPE S.r . l. Frösundaviks Alle 15 Via T. Gulli, 39 169 29 Solna 20147 MILANO SWEDEN ITALY HITACHI EUROPE A A B HITACHI EUROPE S.A.S...