Page 1
_E_/A_/R,._ Owner's Manual CRnFTSMIIN ° 1250 PSi 1.5 GPM DOUBLE INSULATED [] ELECTRIC HIGH PRESSURE WASHER Model No. 580-677130 CAUTION: Before using this product, read this manual follow all Safety Rules and Operating Instructions. SEARS CANADA, Inc., Toronto, Ontario M5B 2B8 Part No BI245 Drat_ I (2127/97)
Page 2
PRESSURE WASHER For one year from the date of purchase, when this Craftsman High Pressure Washer is maintained and operated according to the instructions in the owner's manual, Sears will repair, free of charge, any defect in material and workmanship.
Page 3
Hold the spray gun firmly in your hand before you TRAINING: start the unit. Failure to do so could result in an Locate this pressure washer in areas away from injury from a whipping spray gun. Do not leave combustible materials, combustible fumes or dust. the spray gun unattended while the machine is Some chemicals or detergents may be harmful if running.
Page 4
CARTON CONTENTS Unwind the high pressure hose and attach it to spray gun. The following parts are shipped loose with your pressure washer: • Main Unit -- pressure washer and electrical cord Parts Bag (which includes items listed below) Quick-connect (male and female adaptors) Product Introduction Video •...
Page 5
KNOW YOUR HIGH PRESSURE WASHER READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR HIGH PRESSURE WASHER. Compare the illustrations with your high pressure washer to familiarize yourselt with the locations of various controls and adjustments. Save this manual for 1uture reterence. MASTER ONIOFF SWITCH WATER INLET equipped...
Page 6
APPLYING DETERGENT AND CLEANING WITH HOW TO USE YOUR WASHER ADJUSTABLE NOZZLE If you have any problems operating your pressure wash- IMPORTANT: Use soaps designed specifically for pres- er, please call the pressure washer helpline at sure washers. Household detergents could damage the 1-800-222-3136.
Page 7
RINSING WITH THE PRESSURE WASHER If using an extension cord, observe the following specifications: CABLE LENGTH WIRE GAUGE WARNING Be extremely careful if you Upto25 feet(Sin} 14AWG must use the pressure washer from ladder, scaffolding or any other relatively unstable 50feet 12AWG (15m)
Page 8
Reconnect the wand extension. Remove w and extension. Press theMaster ON/OFF s witch totheONposition. Adjust nozzle for correct pressure, spray angle. Place Safety Latch in OFF position and squeeze trig- ger on spray gun. Motor will start and water should CAUTION: You must be careful at this point.
Page 9
DO NOT attempt to repair a dam- with nozzle in low pressure mode. Flush until you can aged hose. Replace the hose with the genuine Craftsman part. see clear water flowing through hose. Switch the Master ON/OFF switch to OFF, unplug it, Brain water from hose and properly store it to prevent then remove all the hoses.
Page 10
PROBLEM CAUSE CORREC_ON Pressure Washer will n otstart, 1. No electrical poweris available. 1. Check cable, plug, power socket and fuse/circuit breaker. 2. Motor overheats. Length of exle_ion cord is well beyond 50 feet. 3. Trigger not open. 3. Open trigger. Electrical defect.
Page 11
CRAFTSMAN 1250 PSI HIGH PRESSURE WASHER 580-677130...
Page 12
CRAFTSMAN 1250 PSI HIGH PRESSURE WASHER 580-677130 ITEM PART NO. DESCRIPTION ITEM PART NO. DESCRIPTION Decal, Unit (1 req.) Al!28 ASSy, Motor Complete (1 req.) 21144 Decal, Instructions (1 req.) 21318 Boot, Rubber (1 req.) 21054 Spring 15.08 x dia. 1.62CS 2O212 Grommet, Rubber (1 req.)
Page 13
CRAFTSMAN 1250 PSI HIGH PRESSURE WASHER 58__-677130 ITEM PART NO. DESCRIPTION ITEM PART NO. DESCRIPTION Washer, Brg dia. 35 x 52 x "O" Ring, Venturi (1 req.) 97823 B1077 1ram (1 req.) Venturi, Chem. Injector(1 req.) 81060 Bearing, Needle dia. 8 x 12 x Ring, Backup dia, 4.34 Id x...
Page 14
Dear Customer, In manufacturing this product, many steps have been taken to provide you with the highest quality. Unfortunately, errors or emissions occasionally occur. In the event that you find a missing or detective part, please contact your nearest Sears store.