Related Manuals for Sony VGN-N SERIES
Summary of Contents for Sony VGN-N SERIES
- Page 1 Disassemble Instruction VGN-N Series VGN-N SERIES Rev 1.01.100906 SONY CONFIDENTIAL...
- Page 2 Always protect both the unit and the repair surface from scratches, dings, dents, and other cosmetic damage by placing a protective mat between the unit and the repair surface. Never place an LCD face-down on an unprotected surface. Rev 1.01.100906 SONY CONFIDENTIAL...
- Page 3 Disassemble Instruction VGN-N Series – Flow Chart VGN-NXX BATTERY MEMORY KEYBOARD LCD ASSY BEZEL INVERTER LCD PANEL PALMREST TOUCHPAD CPU FAN VGA THERMAL RJ11/RJ45 DC JACK BATTERY COVER SPEAKER Rev 1.01.100906 SONY CONFIDENTIAL...
- Page 4 Screw needed for Disassembly Station Screw model Amount M2*L7 KEYBOARD M2*L7 BOTTOM M2*L7 BOTTOM M2*L3 BOTTOM M2*L1.8 BATTERY COVER M2*L1.8 PALMREST M2*L10 HINGE M3*L6 M2*L10 MOTHERBOARD M2*L7 CPU FAN M2*L5 VGA THERMAL M2*L5 LCD BEZEL M2*L5 SPEAKER T2*L3 Rev 1.01.100906 SONY CONFIDENTIAL...
-
Page 5: Overview-Back
Disassemble Instruction VGN-N Series - Battery Removal OVERVIEW-BACK LOCK / UNLOCK RELEASE PRESS THE UNLOCK TAB AND THE RELEASE TAB TOWARDS THE CENTER OF THE BATTERY. SLIDE THE BATTERY AWAY THE SYSTEM. Rev 1.01.100906 SONY CONFIDENTIAL... - Page 6 VGC-LS1 Series – Battery Removal VGN-N Series - Memory Removal LOOSEN ONE RETAINED SCREW REMOVE EACH RAM MODULE BY RELEASING THE CLIPS AND LIFTING THE RAM FROM THE SOCKET ROTATE THE RAM DOOR FROM THE UPPER EDGE AND LIFT UP Rev 1.01.100906 SONY CONFIDENTIAL...
-
Page 7: Remove Two Screws
Disassemble Instruction VGN-N Series - Optical Drive Removal REMOVE TWO SCREWS SLIDE THE OPTICAL DRIVE OUT OF THE SYSTEM Rev 1.01.100906 SONY CONFIDENTIAL... - Page 8 Disassemble Instruction VGN-N Series - Keyboard Removal ROTATE THE KEYBOARD FROM THE BOTTOM TO REMOVE REMOVE ONE SCREW DISCONNECT THE KEYBOARD CABLE RELEASE FIVE TABS FROM THE BOTTOM OF THE KEYBOARD Rev 1.01.100906 SONY CONFIDENTIAL...
- Page 9 VGN-N Series - Palmrest Removal REMOVE EIGHTEEN SCREWS FROM THE PALMREST. NOTE THERE ARE THREE DIFFERENT LENGTHS TOUCHPAD CABLE LIFT THE PALMREST FROM THE FRONT EDGE. GENTLY DISCONNECT THE TOUCHPAD CABLE. REMOVE ONE SCREW RELEASING THE DETENTS Rev 1.01.100906 SONY CONFIDENTIAL...
- Page 10 VGC-LS1 Series – Battery Removal VGN-N Series - Touchpad Removal OVERVIEW-BACK DISCONNECT THE TOUCHPAD CABLE REMOVE TWO SCREWS. LIFT THE TOUCHPAD BUTTONS THE TOUCHPAD IS AFFIXED TO THE PALMREST WITH DOUBLE- FROM THE TOP EDGE SIDED ADHESIVE Rev 1.01.100906 SONY CONFIDENTIAL...
- Page 11 RELEASE THE WIRLESS CARD BY PRESSING THE TWO CLIPS AWAY FROM THE CARD WIRELESS ANTENNAS DISCONNECT THE WLAN ANTENNAS. NOTE THE ROUTING OF LIFT THE SIDE OF THE WIRELESS CARD UP. REMOVE THE CARD AWAY THE ANTENNAS FROM THE SOCKET Rev 1.01.100906 SONY CONFIDENTIAL...
- Page 12 RIGHT HINGE AND LIFT LCD ASSEMBLY FROM THE SYSTEM HARNESS REMOVE ONE SCREW FROM THE LCD HARNESS ROUTING GUIDE. LIFT DISCONNECT THE TWO CONNECTORS ON THE LCD HARNESS. THE ROUTING GUIDE UP REMOVE THREE SCREWS FROM THE LEFT HINGE Rev 1.01.100906 SONY CONFIDENTIAL...
- Page 13 Disassemble Instruction VGC-LS1 Series – Battery Removal VGN-N Series - Hard Drive Removal OVERVIEW-FRONT SLIDE THE HDD TO THE LEFT AND LIFT UP REMOVE TWO SCREWS Rev 1.01.100906 SONY CONFIDENTIAL...
- Page 14 WHEN INSTALLING THE MOTHERBAORD. ENSURE THE WIRELESS LAN SWITCH ON THE MOTHERBOARD IS IN THE SAME POSITION THE WIRELESS LAN SWITCH ON THE BOTTOM HOUSING LIFT UP THE LEFT SIDE OF THE MOTHERBOARD AND SLIDE THE MOTHERBOARD TO THE LEFT TO REMOVE Rev 1.01.100906 SONY CONFIDENTIAL...
-
Page 15: Fan Cable
VGN-N Series - CPU Removal OVERVIEW-BACK FAN CABLE DISCONNECT THE CPU FAN. REMOVE FOUR SCREWS AND LIFT THE COOLING UNIT UP RELEASE THE CPU LOCK BY ROTATING THE LOCK CLOCKWISE WITH A FLAT-BLADE SCREWDRIVER. CAREFULLY LIFT THE CPU UP Rev 1.01.100906 SONY CONFIDENTIAL... - Page 16 Disassemble Instruction VGC-LS1 Series – Battery Removal VGN-N Series - VGA Thermal Removal OVERVIEW-BACK REMOVE TWO SCREWS AND LIFT THE VGA THERMAL UNIT UP Rev 1.01.100906 SONY CONFIDENTIAL...
- Page 17 VGN-N Series - RJ-11/RJ-45 Harness Removal OVERVIEW-FRONT RELEASE THE CLIP ON EACH SIDE OF THE RJ-11 /RJ-45 BRACKET AND LIFT THE BRACKET UP LIFT THE RJ-11 /RJ-45 HARNESS UP REMOVE ONE SCREW FROM THE RJ-11 /RJ-45 HARNESS Rev 1.01.100906 SONY CONFIDENTIAL...
- Page 18 Disassemble Instruction VGC-LS1 Series – Battery Removal VGN-N Series - DC Jack Harness Removal OVERVIEW-FRONT LIFT THE DC JACK HARNESS UP REMOVE ONE SCREW AND LIFT THE DC JACK BRACKET UP Rev 1.01.100906 SONY CONFIDENTIAL...
- Page 19 Disassemble Instruction VGC-LS1 Series – Battery Removal VGN-N Series - Battery Bay Cover Removal OVERVIEW-FRONT LIFT THE BATTERY BAY COVER UP GENTLY RELEASE THE FOUR CLIPS ON THE BATTERY BAY COVER Rev 1.01.100906 SONY CONFIDENTIAL...
- Page 20 REMOVE TWO SCREWS AND LIFT THE SPEAKER BRACKET UP. LIFT THE SPEAKERS AND HARNESS UP. NOTE THE ROUTING OF THE HARNESS REMOVE TWO SCREWS AND LIFT THE LEFT SPEAKER BRACKET UP.NOTE THE ROUTING OF THE CABLE Rev 1.01.100906 SONY CONFIDENTIAL...
- Page 21 USING GENTLE PRESSURE FROM THE INNER EDGES. RELEASE THE REMOVE FOUR SCREW COVERS DETENTS ON THE BEZEL ROTATE THE BEZEL TOWARDS THE BOTTOM OF THE UNIT TO REMOVE ONE SCREW FROM BENEATH EACH SCREW COVER RELEASE THE FOUR TABS Rev 1.01.100906 SONY CONFIDENTIAL...
- Page 22 CABLE AND THE WIRELESS LAN ANTENNAS THE INVERTER IS AFFIXED TO THE DISPLAY HOUSING WITH DOUBLE SIDED ADHESIVE. GENTLY REMOVE THE INVERTER TOWARDS THE BOTTOM OF THE HOUSING. DISCONNECT THE LCD HARNESS FROM THE INVERTER. NOTE THE TOUTING OF THE HARNESS Rev 1.01.100906 SONY CONFIDENTIAL...
- Page 23 REMOVE SIX SCREWS FROM THE LCD BRACKET. NOTE THERE ARE REMOVE THE TAPE AND DISCONNECT THE LCD HARNESS ON THE TWO DIFFERENT LENGTHS REVERSE SIDE OF THE LCD LIFT THE LCD PANEL UP FROM THE HOUSING Rev 1.01.100906 SONY CONFIDENTIAL...