hit counter script
Download
Share
Print this page
JVC KD-AVX11 Installation & Connection Manual
  1. Manuals
  2. Brands
  3. JVC Manuals
  4. Car Receiver
  5. KD-AVX11 - EXAD - DVD Player
  6. Installation & connection manual

JVC KD-AVX11 Installation & Connection Manual

Hide thumbs Also See for KD-AVX11:
1
2
3
4

Advertisement

Quick Links

Download this manual See also: Instruction Manual
KD-AVX11
Installation/Connection Manual
LVT1657-006A
[A]
This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems. If your vehicle does
not have this system, a voltage inverter is required, which can be purchased at JVC car audio dealers.
WARNINGS
• DO NOT install any unit and wire any cable in locations where;
– it may obstruct the steering wheel and gearshift lever operations, as this may result in a traffic accident.
– it may obstruct the operation of safety devices such as air bags, as this may result in a fatal accident.
– it may obstruct visibility.
• DO NOT operate any unit while manipulating the steering wheel, as this may result in a traffic accident.
• The driver must not watch the monitor while driving.
If the driver watches the monitor while driving, it may lead to carelessness and cause an accident.
• If you need to operate the unit while driving, be sure to look around carefully.
• If the parking brake is not engaged, "Parking Brake" appears on the monitor, and no playback picture
will be shown.
– This warning appears only when the parking brake wire is connected to the parking brake system built
in the car.
Required space for installation
• You cannot install the unit on the car which has any obstacles in the space indicated below.
9.5 mm
2 mm
Control panel
INSTALLATION (IN-DASH MOUNTING)
The following illustration shows a typical installation. If you have any questions or require information
regarding installation kits, consult your JVC car audio dealer or a company supplying kits.
• If you are not sure how to install this unit correctly, have it installed by a qualified technician.
• Make sure not to block the fan on the rear panel to maintain proper ventilation when installed.
Dashboard
Trim plate is detached on this
illustration for explanation.
*
1
When you stand the unit, be careful not
to damage the fuse on the rear.
Parts list for installation and connection
The following parts are provided for this unit. After checking them, please set them correctly.
A
B
C
/
Hard case/Control panel
Sleeve
F
G
Crimp connectors
Washer (ø5)
K
L
Handles
Remote controller
Caution when installing
Fit the unit into the mounting sleeve by using four corners of the
trim plate.
• DO NOT press the panel (shaded in the illustration).
Do the required electrical connections.
Do not block the fan.
1
0107MNMMDWJEIN
©2007 Victor Company of Japan, Limited
D
Trim plate
H
I
Lock nut (M5)
Mounting bolt—
M5 x 20 mm
M
N
Battery
Reverse gear signal extension cord
Bend the appropriate tabs to hold the
sleeve firmly in place.
EN
E
Power cord
J
Rubber cushion

Advertisement

loading

Related Manuals for JVC KD-AVX11

Summary of Contents for JVC KD-AVX11

  • Page 1 This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems. If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC car audio dealers. Parts list for installation and connection The following parts are provided for this unit.
  • Page 2 • BEFORE connecting the speaker leads of the power cord to the speakers, check the speaker wiring in • Replace the fuse with one of the specified rating. If the fuse blows frequently, consult your JVC car audio your car.
  • Page 3 Typical connections Before connecting Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this unit. The leads of the power cord and those of the connector from the car body may be different in color. Connect the colored leads of the power cord in the order specified in the illustration below.

  • Page 4: Troubleshooting

    KS-BTA200 make sure that the unit is turned off. KS-PD100 KD-AVX11 • To use JVC CD changer, Apple iPod or JVC D. player, set “External Input” to “Changer/iPod/D. Player” (see page 39 of the INSTRUCTIONS). • To use other external components via Bluetooth Adapter KS-BTA200 JVC D.