DeWalt D25012 Instruction Manual
Heavy-duty 7/8" compact sds plus rotary hammers
Hide thumbs
Also See for D25012:
- Original instructions manual (153 pages) ,
- Instruction manual (45 pages) ,
- Owner's manual (28 pages)
Advertisement
Available languages
Available languages
Quick Links
-z
m
@
e) Do not overreach. Keep proper footing
and balance at all times. This enables better
control of the power tool in unexpected situations.
f) Dress properly.
Do not wear loose clothing
or jewellery.
Keep your hair, clothing
and
gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in
moving parts.
g) ff devices are provided
for the connection
of dust extraction
and collection
facilities,
ensure these are connected
and properly
used. Use of dust collection can reduce dust-
related hazards.
4) POWER TOOL USE AND CARE
a) Do not force the power tooL Use the correct
power tool for your application.
The
correct power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect
the plug from the power source and/or the battery pack from the power
tool before making any adjustments,
changing
accessories,
or storing power tools.
Such preventive safety measures reduce the risk of starting the power tool accidentally.
d) Store idle power
tools
out of the reach of children
and do not allow persons
unfamiliar
with the power tool or these instructions
to operate the power tool Power
tools are dangerous in the hands of untrained users.
E
"6 _oo
d
E=
_
o€
DEWALT Industrial Tool Co., 701 Joppa Road, Baltimore, MD 21286
(JUN09)
Part No. N027959
D25012, D25013, D25023
Copyright © 2008, 2009 DEWALT
The following are trademarks
for one or more DEWALT power tools: the yellow and black
color scheme; the "D" shaped air intake grill; the array of pyramids on the handgrip; the kit box
configuration; and the array of lozenge-shaped humps on the surface of the tool.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage
of parts
and any other condition
that may affect the power
tool's
operation. If
damaged, have the power
tool repaired before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting
tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control
g) Use the power
tool, accessories
and
tool bits
etc., in accordance
with
these
instructions
taking
into
account
the working
conditions
and
the work
to be
performed.
Use of the power tool for operations different from those intended could result
in a hazardous situation.
5) SERVICE
a) Have your power tool serviced
by a qualified repair person
using only identical
replacement
parts. This will ensure that the safety of the power tool is maintained.
Additional
Safety
Instructions
for Rotary
Hammers
Wear ear protectors.
Exposure to noise can cause hearing loss.
Use auxiliary
handles supplied
with the tooL Loss of control can cause personal injury.
Hold power
tools
by insulated
gripping
surfaces
when performing
an operation
where the cutting
tool may contact hidden
wiring or its own cord. Contact with a "live"
wire will make exposed metal parts of the tool "live" and shock the operator.
Use clamps
or other practical
way to secure and support
the workpiece
to a stable
platform.
Holding the work by hand or against your body is unstable and may lead to loss of
control
Wear safety
goggles
or other eye protection.
Hammering
operations cause chips to
fly. Flying particles can cause permanent eye damage. Wear a dust mask or respirator for
applications that generate dust. Ear protection may be required for most applications.
Keep a firm grip on the tool at all times. Do not attempt to operate this tool without
holding
it with both hands. It is recommended
that the side handle be used at all times.
Operating this tool with one hand will result in loss of control Breaking through or encountering
hard materials such as re-bar may be hazardous as well. Tighten the side handle securely
before use.
The hammer is only for light chiselling applications.
The forward/reverse switch must be in the forward position when chiselling.
Do not use this tool to mix or pump easily combustible or explosive fluids (benzine, alcohol
etc.).
Do not mix or stir inflammable liquids labelled accordingly.
Do not operate this tool for long periods
of time. Vibration caused by hammer action may
be harmful to your hands and arms. Use gloves to provide extra cushion and lim# exposure
by taking frequent rest periods.
Do not recondition
bits yourself.
Chisel reconditioning should be done by an authorized
specialist. Improperly reconditioned chisels could cause injury.
•
Wear gloves when operating
tool or changing
bits. Accessible metal parts on the tool and
bits may get extremely hot during operation. Small bits of broken material may damage bare
hands.
•
Never lay the tool down until the b# has come to a complete
stop. Moving bits could
cause injury.
•
Do not strike jammed
bits
with a hammer
to dislodge
them. Fragments of metal or
material chips could dislodge and cause injury.
•
Slightly
worn chisels
can be resharpened
by grinding.
•
Keep the power cord away from the rotating
bit. Do not wrap the cord around any part
of your body. An electric cord wrapped around a spinning b# may cause personal injury and
loss of control
•
Air vents often cover moving parts and should
be avoided. Loose clothes, jewellery or
long hair can be caught in moving parts.
•
An extension
cord must have adequate
wire size (AWG or American
Wire Gauge) for
safety. The smaller the gauge number of the wire, the greater the capacity of the cable, that
is 16 gauge has more capacity than 18 gauge. An undersized cord will cause a drop in line
voltage resulting in loss of power and overheating. When using more than one extension to
make up the total length, be sure each individual extension contains at least the minimum
wire size. The following table shows the correct size to use depending on cord length and
nameplate ampere rating. If in doubt, use the next heavier gauge. The smaller the gauge
number, the heavier the cord.
Definitions:
Safety
Guidelines
The definitions below describe the level of severity for each signal word. Please read the
manual and pay attention to these symbols.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result
in death or serious injury.
_ WARNING: Indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
_ CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result
in minor or moderate
injury.
NOTICE: indicates a practice not related to personal
injury which, if not avoided, may
result in property damage.
\
J
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY DEWALT TOOL,
CALL US TOLL FREE AT: 1-800-4-DEWALT
(1-800-433-9258)
_
WARNING: To reduce the risk of injury, read the instruction manual.
General
Power
Tool Safety
Warnings
_
ARNING! Read all safety warnings and all instructions.
Failure to follow the warnings
and instructions may result in electric shock, fire and/or serious injury.
SAVE
ALL
WARNINGS
AND
INSTRUCTIONS
FOR
FUTURE
REFERENCE
The term "power tool" in the warnings refers to your mains-operated
(corded) power tool or
battery-operated
(cordless) power tooL
1) WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres,
such as in the presence
of
flammable
liquids, gases or dust. Power tools create sparks which may ignite the dust
or fumes.
c) Keep children
and bystanders
away while operating
a power tooL Distractions can
cause you to lose control
2) ELECTRICAL
SAFETY
a) Power tool plugs must match the outlet. Never modify
the plug in any way. Do not
use any adapter
plugs with earthed
(grounded)
power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
b) Avoid body contact
with earthed
or grounded
surfaces
such as pipes,
radiators,
ranges
and refrigerators.
There is an increased risk of electric shock if your body is
earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying,
pulling
or unplugging
the
power tooL Keep cord away from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
e) When operating
a power tool outdoors,
use an extension
cord suitable
for outdoor
use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f) ff operating
a power tool in a damp location
is unavoidable,
use a ground fault circuit
interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of electric shock.
3) PERSONAL
SAFETY
a) Stay alert, watch what you are doing
and use common
sense
when operating
a
power tool Do not use a power tool while you are tired or under the influence
of
drugs, alcohol
or medication.
A moment of inattention while operating power tools may
result in serious personal injury.
b) Use personal protective
equipment.
Always wear eye protection.
Protective equipment
such as dust mask, non-skid
safety shoes, hard hat, or hearing protection
used for
appropriate conditions will reduce personal injuries.
c) Prevent
unintentional
starting.
Ensure
the switch
is in the off position
before
connecting
to power source and/or battery
pack, picking
up or carrying
the tool
Carrying power tools with your finger on the switch or energising power tools that have the
switch on invites accidents.
d) Remove any adjusting
key or wrench before turning
the power tool on. A wrench or
a key left attached to a rotating part of the power tool may result in personal injury.
Ampere Rating
More
Than
0
6
10
12
Not More
Than
6
10
12
16
Minimum Gauge for Cord Sets
Volts
Total Length of Cord in Feet (meters)
120V
25 (7.6)
50 (15.2)
100 (30.5)
150 (45.7)
240V
50 (15.2)
100 (30.5)
200 (61.0)
300 (91.4)
AWG
18
18
16
14
16
16
16
12
16
14
14
12
14
12
Not Recommended
NOTE: Do not overheat the bfl (discoloration)
while grinding a new edge. Badly worn chbels
require reforging. Do not reharden and temper the chisel
_ WARNING: ALWAYS use safety glasses. Everyday eyeglasses are NOT safety glasses. Also
use face or dust mask if cutting operation is dusty. ALWAYS WEAR CERTIFIED SAFETY
EQUIPMENT:
• ANSI Z87.1 eye protection (CAN/CSA Z94.3),
• ANSI $12.6 ($3.19) hearing protection,
• NIOSH/OSHA/MSHA
respiratory protection.
_WARNING:
Some dust created by power sanding, sawing, grinding, drilling, and other
construction
activities contains
chemicals
known to cause cancer, birth defects or other
reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To
reduce your exposure to these chemicals: work in a well ventilated area, and work with approved
safety equipment, such as those dust masks that are specially designed to filter out microscopic
particles.
•
Avoid prolonged
contact
with dust from power sanding,
sawing,
grinding,
drilling,
and other construction
activities. Wear protective
clothing and wash exposed areas
with soap and water. Allowing dust to get into your mouth, eyes, or lay on the skin may
promote absorption of harmful chemicals.
WARNING: Use of this tool can generate and/or disburse dust, which may cause serious and
permanent respiratory or other injury. Always use NIOSH/OSHA approved respiratory protection
appropriate for the dust exposure. Direct particles away from face and body.
_ WARNING: Always use eye protection.
All users and bystanders must wear eye protection
that conforms to ANSI Z87.1.
_ WARNING: Always
wear proper
personal
hearing
protection
that conforms
to ANSI
$12.6 ($3.19) during use. Under some conditions and duration of use, noise from this product
may contribute to hearing loss.
•
The label on your tool may include the following symbols. The symbols and their definitions
are as follows:
V........................ volts
Hz ...................... hertz
min .................... minutes
---
................. direct current
@ ...................... Class I Construction
(grounded)
[] ...................... Class II Construction
(double insulated)
.../min ............... per minute
A ....................... amperes
W. ..................... watts
"_ .................... alternating current
.................... alternating or direct current
no ..................... no load speed
..................... earthing terminal
_ ..................... safety alert symbol
BPM ................. beats per minute
RPM ................. revolutions per minute
Advertisement
Related Manuals for DeWalt D25012
Summary of Contents for DeWalt D25012
- Page 1 Minimum Gauge for Cord Sets IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY DEWALT TOOL, Volts Total Length of Cord in Feet (meters) CALL US TOLL FREE AT: 1-800-4-DEWALT...
-
Page 2: Operation
Use a cutting lubricant when drilling metals. The Your DEWALT tool is powered by a DEWALT-built motor. Be sure your power supply agrees exceptions are cast iron and brass which should be drilled dry. For MASONRY, use carbide- with the nameplate markings. -
Page 3: Maintenance
Wrifier si les pieces mobiles sont mal alignees DEWALT will maintain the tool and replace worn parts caused by normal use, for free, any time coincees, si des pieces sont brisees ou presentent toute autre condition susceptible during the first year after purchase. - Page 4 : Pour reduire tout risque de dommages corporels graves, arr6ter et Moteur debrancher I'outil avant tout reglage ou avant de retirer ou installer toute piece ou tout accessoire. Votre outil DEWALT est 6quip6 d'un moteur d'origine DEWALT. S'assurer que le courant utilis6 _AVERTISSEMENT : Pour reduire tout risque...
- Page 5 El uso de dispositivos de recoleccidn de polvo puede reducir los (y compris I'inspection et le remplacement de la brosse) doivent 6tre rGalis_s par un centre de rGparation en usine DEWALT, un centre de rGparation autoris_ DEWALT ou par un personnel de peligros relacionados con el polvo.
- Page 6 Tambi_n puede usarlo para taladrar sin el percusor en madera, metal, ceramica y plastico. Motor Taladrado (Fig. Esta herramienta DEWALT esta impulsada por un motor fabricado por DEWALT. Compruebe i_4DVERTENCIA: Para reducir el riesgo de lesiones corporales graves, apague que el suministro el_ctrico concuerde con el indicado en la placa de caracteristicas.
- Page 7 DEWALT reparar& sin cargo, cualquier falla que surja de defectos en el material o la fabricaci6n del producto, por hasta tres a5os a contar de la fecha de compra. Esta garantia no cubre fallas de las piezas causadas por su desgaste normal o abuso a la herramienta. Para mayores detalles sobre la cobertura de la garantia e informaci6n acerca de reparaciones realizadas bajo garantia, visitenos en www.dewalt.com...