See s eparate
guide for i nstalling
the stand.
(M4 X LS)
Follow the steps below to connect the TV to the stand.
Screws(M4X LS) . ..... _ T It 1F
Topview
......... ..........
Stand....
Rear __
1. Connect the Guide Stand to the Stand using four screws (M4 X LS) as shown.
2.
With your TV upright, connect the TV to the Stand.
3.
Screws(M4X LS) . ...
Fasten two screws (M4 X LS) at position _, and then
fasten three screws (M4 X LS) at position _.
NOTE
" Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.
" Make sure that at least two persons lift and move the LED TV.
" Stand the product up and fasten the screws. If you fasten the screws with the LED TV placed down, it may lean to
one side.
English
5