Samsung UN46C6800 User Manual page 31
6 series 6800
Hide thumbs
Also See for UN46C6800:
- User manual (124 pages) ,
- Manual del usuario (61 pages) ,
- Available apps (16 pages)
Table of Contents
Advertisement
SWL (Samsung
wireless
Link) ............................................................
This function lets you connect your TV to a Samsung device
(router, etc,) that supports PBC (WPS). You can connect the
TV to the device even if a sharer is not connected to the TV.
For the TV to use Internet@TV, the AP (access point)
must be connected to the wireless network.
If a Samsung Wireless LAN Adapter is connected to the
USB 2 port, the network may not operate normally. We
recommend connecting it to the USB 1 (HDD) port.
Only sharers using the 2.4 Ghz band are supported.
Sharers using the 5 Ghz band are not supported.
SWL connect
You can directly connect the TV to a Samsung device that
supports PBC (WPS).
This function is available when SWL (Samsung
Wireless Link) is set to On.
To use the SWL (Samsung Wireless Link) function,
connect the Samsung Wireless LAN Adpater to the USB
1 (HDD} port.
How to connect using Samsung Wireless Link
To connect using Samsung Wireless Link, follow these steps:
1.
Follow Steps 1 through 5 in the "How to set up using
PBC (WPS)" (p. 29).
2.
Select SWL (Samsung Wireless Link) by using the
button, and then press the ENTERI_
button to turn it
On.
3.
Select SWL connect by using the T button and then
press the ENTERE_ button.
4.
If the "Press the PBC button on the device which
supports PBC button to connect within 120
seconds" message appears, press the PBC button on
the device to connect.
For more information, refer to the wireless network
setup manual of the device to be connected.
5.
If the TV connects properly to the device after the count
in the message box starts, then the message box
disappears automatically.
If the connection fails, please retry after 2 minutes.
If Your rv Fails to Connect to the Internet
Your TV may not be able to connect to the Internet
because your ISP has permanently registered the
MAC address (a unique identifying number) of your
PC or modem, which it then authenticates each time
you connect to the Internet as a way of preventing
unauthorized access. As your TV has a different MAC
address, your ISP can not authenticate its MAC address,
and your TV can not connect.
To resolve this problem, ask your ISP about the
procedures required to connect devices other than a PC
(such as your TV) to the Internet.
If your Internet service provider requires an ID or password
to connect to the Internet, your TV may not be able to
connect to the Internet. If this is the case, you must enter
your ID or password when connecting to the Internet.
The internet connection may fail because of a firewall
problem. If this is the case, contact your Internet service
provider.
If you cannot connect to the Internet even after you have
followed the procedures of your Internet service provider,
please contact Samsung Electronics at 1-800-SAMSUNG.
English 31
Advertisement
Table of Contents
Troubleshooting
