Table of Contents
Advertisement
Bluetooth setup
Registering the PIN code
By operating the Bluetooth device, specify the PIN
code necessary for registering this unit.
1
Enter the Bluetooth mode
Press the [
] button.
"BT MODE" is displayed.
2
Enter the Function setting mode
Press and hold the Control knob.
3
Select the PIN code edit item
Select the following items using the Control
knob.
Refer
"Settings"
>
"Detailed Settings"
>
"PIN Code Edit"
4
Input the PIN code
Operation type
Operation
Selection of numbers
Turn the Control knob.
Movement to the next digit Push the Control knob rightward.
Deletion of the last digit
Push the Control knob leftward.
Transmission of PIN code
Press the Control knob.
If "Completed" is displayed, registration is complete.
5
Exit the Bluetooth mode
Press the [SRC] button.
⁄
• By default, "0000" is specified.
• A PIN code can be specified with up to eight digits.
42
|
KDC-BT52U
Downloading the phone book
You can download the phone book data from the
cell-phone to this unit so that you can use the
phone book of this unit.
Downloading automatically
If the cell-phone supports a phone book
synchronization function, the phone book is
downloaded automatically after Bluetooth
connection.
⁄
• Setting on the cell-phone may be required.
• If no phone book data is found in the unit even after
"Completed" is displayed, your cell-phone may not support
a phone book data automatic downloading function. In this
case, try downloading manually.
Downloading from the cell-phone manually
1
Operate the cell-phone to end the hands-free
connection.
2
Operate the cell-phone to send the phone
book data to this unit
By operating the cell-phone, download the phone
book data to this unit.
• During downloading:
"Downloading" is displayed.
• After completion of downloading:
"Completed" is displayed.
3
Operate the cell-phone to start the hands-free
connection.
Clearing the downloading completion message
Press any button.
⁄
• Up to 600 phone numbers can be registered for each
registered cell-phone.
• Up to 32 digits can be registered for each phone number
along with up to 50* characters representing a name.
(* 50: Number of alphabetical characters. Fewer characters
can be input depending on the type of characters.)
• To cancel downloading of the phone book data, operate
the cell-phone.
Displaying the firmware version
You can view the version of the firmware of this
unit.
1
Enter the Bluetooth mode
Press the [
] button.
"BT MODE" is displayed.
2
Enter the Function setting mode
Press and hold the Control knob.
3
Select the Bluetooth firmware update item
Select the following items using the Control
knob.
Refer
"Settings"
>
"Detailed Settings"
>
"BT F/W Update"
The firmware version appears.
4
Exit the Bluetooth mode
Press the [SRC] button.
⁄
• For how to update the firmware, access our web site.
www.kenwood.com/bt/information/
Contents
43
|
English
Advertisement
Table of Contents
