Table of Contents
Advertisement
Quick Links
GEAppliances.com
U
@
®I
0
N
0_
4-!
...........
2
Operating Instructions
Switches .........
3-5
...................
6, 7
On/Off Switch ....................
8
Control ...............
8
Air Filters ........................
9
Base Pan ........................
9
Exhaust Coils .....................
9
Electrical Supply..............
11-13
Installing the Zoneline ........
14-21
Preparation .....................
10
Servicing ........................
22
Tips .......
23
Normal Operating Sounds .......
24
Consumer Support ......
Back Cover
.......................
27
Cool Only, Heat/Cool and
Heat Pump Hodels
8500 Series
Espaflo!
For a Spanish version of this manual, visit our
Website at GEAppliances.com.
Para consultar
una version en espahol deeste
manual de instrucciones,
@site nuestrositio
de intemet GEAppliances.com.
Frangaise
For a French version of this manual, visit our
Website at GEAppliances.com.
Pour une version franqaise de ce manuel
d'utilisation,
veuillez visiter notre site web 8
I'adresse GEAppliances.com.
!
Write the model and serial numbers
here:
Model #
Serial #
You can find them on a label on the front
case panel.
Printed in China
TINSEA612JBRZ
49-7639
01-10 GE
Advertisement
Table of Contents
Related Manuals for GE Appliances Zoneline 8500 series
Summary of Contents for GE Appliances Zoneline 8500 series
-
Page 1: Table Of Contents
Pour une version franqaise de ce manuel d'utilisation, veuillez visiter notre site web 8 I'adresse GEAppliances.com. Write the model and serial numbers here: Model # Serial # You can find them on a label on the front case panel. TINSEA612JBRZ 49-7639 01-10 GE Printed in China... -
Page 2: Safety Instructions
IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING. A WARNING! Risk of electric shock. Can cause injury or death. For your safety, the information in this manual must be followed to minimize the risk of fire, electric shock or personal injury. SAFETY PRECAUTIONS This Zoneline must be properly installed [] Unplug or disconnect... -
Page 3: Controls-Dip Switches
GEAppliances.com Controls-dip switches. Controls-Dip Switches The dip switch controls are located behind the front case panel, through an opening on the front of the unit. To access the dip switches, remove the front case panel by removing the filter, taking out the four front screws, the upper two screws from the top of the panel and the shipping screws on each side, if present. - Page 4 Controls-dip switches. Freeze Sentinel (Requires room air sensor kit-RAVRMS) When this switch is enabled (UP),it turns OFF the freeze sentinel protection feature. With the switch disabled (DOWN), t he freeze sentinel is [BBBBBBiIBITIBBBBI activated which automatically provides heat without user interface. This helps to prevent plumbing damage by turning the heater FREEZE S (Freeze Sentinel) and fans ON at 4! °...
- Page 5 GEAppliances.com Temperature Limiting (Requires room air sensor kit-RAVRMS) Temperature limiting can reduce energy costs of auxiliary controls. The first three switches are by limiting the lowest temperature that can be used to select the cooling limits. The next three set for cooling and the highest temperature that switches are used to control the heating limits.
-
Page 6: O1 Controls--Terminal
Controls-terminal connections. Controls-Terminal Connections Theterminal connections are located behind A CAUTION: the front case panel through an opening on the front of the unit. Improper CDCwiring may damage the Zoneline electronics or cause erratic Zoneline operation. To access the terminal connections, remove No common busing is permitted. - Page 7 GEAppliances.com Notion Sensor (Obtainedlocally) The Occupancy Sensor dip switch must be in the up position to use this feature. When connected, the wall mounted motion sensor will detect motion in the room and automatically cycle the unit between normal operation and _ ,,<...
-
Page 8: On/Off Switch
Other features of your Zoneline. On/Off Switch The unit on/off switch is located on the front of the Zoneline. To turn on the unit, press the top of the switch in. ON/OFF switch To turn off the unit, press the bottom of the switch in. -
Page 9: Care And Cleaning
If they are clogged with dirt or soot, they may be professionally steam cleaned by your GE service center. You will need to remove the unit from the case to inspect the coils because the dirt build-up occurs on the exhaust side. -
Page 10: Preparation
Installation Zoneli Instruction i Questions? Visit our Website at: GEAppliances.com or call (800.432.2737). 800.GE.CARES BEFORE YOU BEGIN IMPORTANT ELECTRICAL Read these instructions completely and carefully. SAFETY-READCAREFULLY . IMPORTANT - Save these instructions for local inspector's use. A WARNING: RISK OF ELECTRIC SHOCK. -
Page 11: Installation Instructions
Installation Instructions ELECTRICAL REQUIREMENTS Use ONLY the wiring size recommended for single FOR 230/208 VOLT CORD outlet branch circuit. CONNECTIONS ONLY Proper current protection is the responsibility 1. Removethe front panel by taking out the four of the owner. front screws, the upper two screws from the top of the panel and the shipping screws on each side, Recommended branch circuit wire sizes*... - Page 12 Installation Instructions DIRECT CONNECT APPLICATIONS FOR 265 VOLT DIRECT CONNECT FOR 230/208 VOLT DIRECT CONNECT APPLICATIONS ONLY APPLICATIONS ONLY Direct connection to branch circuit wiring inside IMPORTANT: C onnection of a 265V AC product the provided junction box must be made by connecting to a branch circuit MUSTbe done by direct connection as follows in steps 1-3 below.
- Page 13 Installation Instructions DIRECT CONNECT APPLICATIONS MAKE WIRE LEAD CONNECTIONS INSIDE THE JUNCTION Make all wire connections by using appropriate UL-listed electrical connectors and techniques. Select the applicable wiring situation and follow the instructions accordingly: 1-Phase 220-240 VAC 3-Phase 208 VAC with "Crazy Leg" When connecting the Zoneline to a single-phase circuit When connecting the Zoneline to a three-phase circuit for 230V applications:...
- Page 14 Installation Instructions ZONELINE COMPONENTS Case Zoneline unit Front Case Panel REQUIRED ACCESSORIES (Check the "Essential Elements" label on the unit.) Cutout Dimensions: 20" W x 32_"H Wall Plenum RAVWP6 - 6"D x 19¾"W x 32"H RAVWP8 - 8"D x 19s/J'W x 32"H Architectural Louver RAVWP12 - 12"D x 19¾"W x 32"H...
- Page 15 Installation Instructions TYPICAL UTILITY CLOSET AND DIMENSIONS (FOR REFERENCE ONLY) UNIT INSTALLED THROUGH FRONT OF CASE UNIT INSTALLED THROUGH SIDE OF CASE Top View Top View Architectural Louver Architectural Louver 11_" 5" min. Door/access panel 4" min. Unit front 5" min. Door/access panel Side View...
- Page 16 Installation Instructions UTILITY CLOSET CONNECTION LOCATIONS IMPORTANT: Plan and locate plenum, wall plug, drains and thermostat carefully to avoid interference. Hard-to-reach locations will make installation and service difficul!! Reference Dimensions Flex duct may be used A Thermostat cable: 9½" long for transitions only Use rigid duct for B Power cord: 60"...
- Page 17 Installation Instructions RETURN AIR GRILLE INSTALLATION OPTIONS The room return air grille may be installed toward the front or either side of the unit. Improper return air arrangements will cause performance problems. There are three indoor return eir grille instellotion options.
- Page 18 Installation Instructions WALL PLENUM AND ARCHITECTURAL LOUVER INSTALLATION • Install the appropriate wall plenum through the exterior wall in accordance with the Installation Instructions provided with the plenum, IM PORTANT: The wall plenum is not designed to carry structural loads. Proper wall header construction is required.
- Page 19 Installation Instructions DUCTWORK []_] INSTALL THE DRAIN{S) An external oran internal drain must be attached Prepare the closet ductwork for later connection to the case. totheprima_ drain connector. A secondary drain issupplied i f required b y state and local c odes. Refer The total flow rate (CFM)and external static pressure tothelocal c odesforproper installation ofthedrains.
- Page 20 Installation Instructions [_]INSTALL AND GROUND [_J INSTALL AND CONNECT THE CASE THE UNIT TO THE CASE 1. Remove the front case panel and pull UNIT INSTALLED THROUGH FRONT OF CASE the unit out of the case. Placethe empty case onto the platform in the closet with the outdoor side facing 1.
- Page 21 Installation Instructions J_ MAKE UNIT ELECTRICAL -7] CONNECT THE TOP DUCT CONNECTIONS !. Install the duct onto the air discharge outlet. 1. Connect the thermostat wires to the unit and set Inside the dip switches to the appropriate settings. wall NOTE:See the Controls-Terminal Connections and Controls-Dip Switches sections of this manual and the manual with...
-
Page 22: Servicing
Installation Instructions SERVICING FINAL CHECK WARNING:Risk of Electric Reviewthis Checklist before restoring power. Shock, . Correct line voltage? can cause injury or death. Before servicing, Single circuit only? switch power off at the service panel and lock the area to prevent power from being switched HVACRtype breaker/fuse7 on accidentally. -
Page 23: Troubleshooting Tips
Before You Call For Service... GEAppliances.com Troubleshooting Tips Problem Possible Causes What To Do Zoneline does The unit is unplugged. * Make sure the Zoneline plug is pushed completely not start into the outlet. The fuse is blown/circuit * Check the house fuse/circuit breaker box and replace breaker is tripped, the fuse or reset the breaker. -
Page 24: Normal Operating Sounds
Things that are normal. Normal Operating Sounds You may hear a pinging noise caused by water being PING! picked up and thrown against the condenser on rainy days or when the humidity is high. This design feature helps remove moisture and improve efficiency. You may hear relays click when the controls cycle "CLICK"... - Page 25 Notes. GEAppliances.c0m...
- Page 26 Notes.
-
Page 27: Warranty
USA and Canada. If the product is located in an area where service by a GE Authorized Servicer is not available, you may be responsible for a trip charge or you may be required to bring the product to an Authorized GE Service location for service. -
Page 28: Consumer Support
Contact Us G EAppliances.corn If you are not satisfied with the service you receive from GE,contact us on our Website with all the details including your phone number, or write to: General Manager, Customer Relations GEAppliances,Appliance Park Louisville,KY40225 Register Your Appliance GEAppliances.corn...