Installation
Instructions
[]
REVERSING THE DOOR SWING (CONT.)
[] REVERSING
THE HARDWARE
4.1 Remove
the base grille
(if'your
refi'igerator
has
one)
by pulling
it straight
out.
4.2 Using
a Torxdrivm;
move the bottom
hinge
bracket
(and
shim
glued
to it) and
plastic
washer
from
the right
side to the left side.
PlasticWasher
Hing
[] REVERSING
THE DOOR HANDLES
5.1 Transfer fresh food door handle
Plug'_
5.1.1
Remove
the handle
plug
using
a
tape-tipped
putty knife
under
the edge,
and
remove
the screw underneath.
Remove
the two screws holding
the
handle
to the top of the doon
5.112 Remove the handle.
4.3 Interchange
hinge
{and the shim glued
to it} and
screws a[ top right with screws at top left of cabinet.
Do not tighten screws
on hinge side at this time.
ns[amngme nmgeon the left. installing the hingeon the right
NOTES:
• Some hinges have four holes. Which holes you
use for installing
the hinge depends
on which
side you install the hinge.
• The outer edge of the hinge should be parallel
[o the edge of the case tor correct installation.
5.1,3
Remove
the screws from
the right
edge
of the
door
top and
insert
them
into
the handle
screw
holes
on the opposite
side,
5.1.4 With tape-tipped
putty knife or thin-blade
screwdrivm; pry out the plug button from the
hinge hole on the left side of the door and
insert it into the hole on the opposite
side that
was vacated by removal of the top hinge.
22