Page 1
N Bruksanvisning for oppladbar elektrobørste S Bruksanvisning för batteridrivet motormunstycke f Käyttöohje - akkutoiminen mattosuutin j Brugsanvisning til akku-elektrobørste R Инструкция по эксплуатации электрощетки с аккумулятором Q Instrukcja użytkowania elektroszczotki akumulato- rowej SAB 100 ACCU NOVA M.-Nr. xx xxx xxx...
The Miele battery-operated brush supplied with the battery-operated is a motor-driven accessory for use brush to operate it. with Miele vacuum cleaners only. It Only use the original charger must not be used with vacuum cleaners supplied with the appliance to produced by other manufacturers.
Page 3
Warning and Safety instructions Do not let the battery-operated They could block the battery-operated brush, the battery or the charger brush and the vacuum cleaner, and get wet. Clean only with a dry cloth, or cause damage. a slightly damp cloth to avoid any Do not vacuum up ashes or coal, moisture getting into the appliance, whether glowing or apparently...
G Description of the appliance a On/Off switch b Battery c Battery indicator light Green: The battery-operated brush is switched on and the battery is charged (Stand by) Red: The battery needs to be charged d "Operation / Blockage" indicator light Green: The vacuum cleaner is switched on, and the battery-operated brush is in use Red: The brush roller is blocked.
The standard floorhead or one of the Miele floorbrushes should be used for cleaning hard floors, such as tiled or parquet floors. It is also important to observe the flooring manufacturer’s cleaning and...
Before using for the first time The battery charger has 2 displays for checking the charge. At the end of The connection data on the plug charging, one display will continue to of the battery charger (voltage and light up red, whilst the other lights up frequency) must match the mains green.
Fit the supports so that the single Spare parts are available from your notch points towards the roller cover, Miele dealer or from the Miele Spare (see left hand illustration). The bristles Parts Department. protrude approx. 2 mm. This is important for the brushing effect.
Page 9
Änderungen vorbehalten / SAB 100 - 4305 M.-Nr. xx xxx xxx / V00...