Attach the TV to
Connect video
the Stand
devices
Step
Step
1
Warning: Screens can be damaged
from direct pressure when handled
incorrectly. We recommend lifting the
TV by the edges, as shown.
Step 1
Attach the TV to the Stand
1A
REQUIRED TOOLS: a Phillips head screwdriver and a soft, flat surface larger than the TV
(such as the box).
1C
L
R
x4 (M4 X L12)
1E
1G
x4 (M4 X L12)
QUICK START
GUIDE
BN68-05427A-01
Power on and
Using the Smart
start the initial
Touch Control
setup
Step
Step
2
3
Open the package, and take the cushioning out
of it.
Fit the base and legs together, making sure that
the legs are correctly aligned with the base. See
the diagram below.
Base may differ depending on the model.
✎
Lay the TV on a soft surface, screen side down.
Use the packing material to protect the screen.
Insert 4 screws and secure the stand to the TV.
Base may differ depending on the model.
✎
Welcome to your new Smart TV!
The following instructions cover assembling, connecting, and setting up your new TV. Make
sure you have the accessories listed below.
Included in this box
Remote Control
Smart Touch Control
4
Batteries (AAA x 4)
Remote Control
Also included: User manual, 3D Active Glasses, Quick Setup Guide
1B
1D
1F
1H
Stand Parts and Cables
Power cord
Component adapter
One connect cable
IR extender
Put a base, legs and screws off to assemble the
stand out of the box.
or
x 2
Base
Leg
Base may differ depending on the model.
✎
Accessories may be located at different positions,
✎
depending on the model.
Insert 2 screws through the base into each leg as
shown, and then secure the legs to the base with
a screwdriver.
Base may differ depending on the model.
✎
Holding the stand parallel to the screen, slide the
stand legs into the notches on the back of the TV.
Base may differ depending on the model.
✎
When placing the product on a console or shelf,
make sure that the stand does not protrude
beyond the edge of the console or shelf. This
may cause the product to fall off and result in a
malfunction or injury.
RCA adapter x 2
One connect
x 8
Screws