LG 42PN4500 Owner's Manual
Hide thumbs
Also See for 42PN4500:
- Owner's manual (97 pages) ,
- Service manual (36 pages) ,
- Specification (2 pages)
Related Manuals for LG 42PN4500
Summary of Contents for LG 42PN4500
- Page 1 Life's Good MAMUA{ PLASMA Please read this manual carefully before operating your set and retain it for future reference. 42PN4500 50PN5300 50PN6500 60PN6550 50PN4500 60PN5300 60PN6500 P/NO : MFL67701702 (1301=REV02) www.lg.com...
-
Page 2: Important Safety
MPORTANTSAFETY NSTRUCTONS IMPORTANT SAFETY INSTRUCTIONS Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. Read these instructions. Keep these instructions. Heed all warnings. WARNING/CAUTION Follow all instructions. Do not use this apparatus near water. - Page 3 MPORTANTSAFETY NSTRUCTONS • Protect the power cord from being walked on CAUTION concerning the Power Cord or pinched particularly at plugs, convenience (Can differ by country): receptacles, and the point where they exit from the It is recommended that appliances be placed upon a apparatus.
- Page 4 • If you smell smoke or other odors coming from Do not attempt to modify this product in any way the TV, unplug the power cord and contact an without written authorization from LG Electronics. authorized service center. Unauthorized modification could void the user's •...
- Page 5 MPORTANTSAFETY NSTRUCTONS • Dot Defect For USA and Canada The Plasma or LCD panet is a high technology product with resolution of two million to six mitlion pixels, in a very few cases, you could see fine dots on the screen while you're viewing the TV. Those dots are deactivated pixels and do not affect the This equipment has been tested and found to performance...
-
Page 6: Licenses
L CENSES LICENSES Supported licenses may differ by model. For more information about licenses, visit 'www.lg.com'. FI] DOLBY Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. D|GITAL H lrlrilll HDMI, the HDMI logo and High-Definition... -
Page 7: Table Of Contents
TABLE OF' CONTENTS TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS REMOTE CONTROL WATCHING LICENSES Turning the TV on for the first time TABLE OF CONTENTS TROUBLESHOOTING INSTALLATION PROCEDURE EXTERNAL CONTROL DEVICE SETUP ASSEMBLING PREPARING SPECIFICATIONS Unpacking Parts and buttons Additional information of the manual Lifting and moving... -
Page 8: Installation Procedure
The illustrations in this manual may differ from the actual product and item. Power Cord Remote control, Owner's manual, Batteries (AAA) CD manual (See p.25) (For 50PN4500, 50/60PN5300, (For 42PN4500) (For 42PN4500) 50/60PN6500, 60PN6550) Stand Screws Stand Screws Desk-mount Screw 7 EA, M4x 7 EA, M5x (See p.14) (See p.12) - Page 9 ASSEMBLNGAND PREPARNG Ferrite core (Depending on model) CAUTION ....................• Do not use any unapproved items toensure the safetyand productlife s pan. • Any damages or injuries by using unapproved items are not coveredby the warranty. • Some models appear to have a thin filmon the screen.Itisactually p art ofthe screen,do not remove it. NOTE •...
-
Page 10: Parts And Buttons
ASSEMBLNGANDPREPARNG Parts buttons Remote control sensor Power indicator --Screen Bu_ons. Speakers Scrolls through the saved channels. Adjusts the volume level. Selects the highlighted menu option or confirms an input. Accesses the main menus, or saves your input and exits the menus. Changes the input source. -
Page 11: Additional Information Of The Manual
ASSEMBL NG AND PREPAR Additional information of the Lifting moving theTV manual When moving or lifting the TV, read the following prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. CAUTION The owner's manual in PDF file format is supplied on the •... -
Page 12: Setting Up Thetv
(if they are not fastened securely enough the TV may tilt forward after being installed.) • Do not fasten the screws with too much force; otherwise they may be worn out and get loosened ......_For 42PN4500 M4x14 Stand Bod, For 50PN4SO0, 50/60PN5300,... - Page 13 ASSEMBLNGAND PREPARNG 13 To detach the stand, For 50PN4500, 50PN5300, 50PN6500 ?////////////////////////_! _4EA M 5 x 16 1 EA M5 x 16 Protection cover • Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.
-
Page 14: Mounting On A Table
NG AND PREPAR Mounting a table (For 42PN4500) Lift and tilt the TV into its upright position on a table. Fix the TV to a table to prevent from tilting forward, - Leave a 10 cm (4 inches) (minimum) space from damage, and potential injury. -
Page 15: Mounting On A Wall
Mounting on a wall (Depending on model) An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model. Carefully attach the wall mount bracket at the rear of the TV. -
Page 16: Tidying Cables
Use an by accident. authorized LG wallmount and contactthe local dealerorqualified personnel. (For 42PN4500) • Do not over tighten the screws as this may cause damage to the TV and void your warranty. -
Page 17: Making Connections
MAKNGCONNECTONS MAKING CONNECTIONS You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external device's connection, refer to the manual provided with each device.. -
Page 18: Connecting To A Hd Receiver
MAKNGCONNECTONS Connecting to a receiver, Player or VCR Connect a HD receiver, DVD Player or VCR to the TV and select an appropriate input mode. HDMI Connection HDMI is the best way to connect a device. Transmits digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown in the following illustration. -
Page 19: Component Connection
MAKNGCONNECTONS Component Connection Transmits the analog video and audio signals from an external device to the TV, Connect the external device and the TV with the component cable as shown in the following illustration. NOTE • If cablesare installed incorrectly, itcouldcause the image todisplay inblackand white orwith distorted c olor. -
Page 20: Composite Connection
MAKNGCONNECTONS Composite Connection Transmits the analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration. I. NOT If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L!MONO jack of the TV. -<... -
Page 21: Connecting To A Pc
MAKNGCONNECTONS Connecting to a NOTE • Itis recommended to use an HDMI connection for the best image quality. • Depending on the graphics card, DOS mode may not work ifa HDMI to DVI Cable is in use. • In PC mode, there may be noise associated with the resolution,vertical pattern, contrast or brightness. - Page 22 MAKNG CONNECTONS (*Not Provided)
-
Page 23: Connecting To An Audio System
MAKNG CONNECTONS Connecting to an Audio System You can use an optional external audio system instead of the built-in speaker, If you use an optional external audio device instead of the built-in speaker, set the TV speaker feature to off. Digifal Opfical Audio... -
Page 24: Connecting A Usb Device
MAKNG CONNECTONS Connecting Device Connect a USB storage device such as a USB flash memory, external hard drive, or a USB memory card reader to the TV and access the USB menu to use various multimedia files. (*Not Provided) - Page 25 REMOTE CONTROL 25 REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To instalt batteries, open the battery cover, replace batteries (I .5 V AAA) matching the _F} and {_ ends to the labe[ inside the compartment, and close the battery cover.
- Page 26 EMOTECONT + VOL-- Adjusts the volume level. Accesses your favorite channet list. Selects a menu or option. AUDIO Digital signal Changes the audio language. Analog signal: Changes the MTS sound. MUTE Mutes all sounds. ACHv Scrollsthrough the saved channels. A PAG E v Moves to the previous or next screen, PICTURE...
-
Page 27: Watching
W/_TCH N_;TV 27 WATCHING When the basic settings are complete, press OK. _NOTE Turning the TV on for first time • if you do not comptete the Initial setting, it will appear whenever the TV turns on. When you turn the TV on for the first time, the Initial •... - Page 28 TROUBLESHOOT TROUBLESHOOTING Problem solution Cannot control the TV with the • Check the remote control sensor on the product and try again. remote control. • Check if there is any obstacle between the product and the remote control. Check if the batteries are still working and properly installed (qti to ,_ ,_ to . No image display and no sound is •...
- Page 29 The station signal may be weak. Aim the antenna to the proper direction. Check if there is local interferences such as an electrical appliance or power tool. EXTERNAL CONTROL DEVICE SETUP To obtain the external control device setup information, please visit 'www.lg.com'.
- Page 30 SPEC F CAT ONS SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions. Power requirement AC100 - 240 V - 50/60 Hz Television System NTSC-M, ATSC, 64 & 256 QAM Program Coverage VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135 External Antenna impedance 75 ©...
- Page 31 Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind: TIHE ISSUE • The home theater entertainment experience is a growing trend larger flat panel displays are popular purchases. However, flat panel displays are not alw/ays supported on the proper...
- Page 32 CD--ROM drive. 1-888_865-3026 USA, Co_r _r erclal User 1-888_542_2623 CANADA The model and serial number of the TV is located on the back and/or one side of the TV. www.lg.com Record it below should you ever- need service. MODEL SERIAL...
-
Page 33: External
Life's Good EXTERNAL CONT DEVICE S£ Please read this manual carefully before operating the set and retain it for future reference, www.lg.corn... - Page 34 KEY CODES KEY CODES • This feature is not available for all models. Code Function Note C°de Function Note (Hexa) (He×a) Q.Menu R!C Button CH +, PR + R!C Button CH -, PR - R/C Button List, - (ATSC Only) R/C Button Volume + R!C Button...
- Page 35 • LGTV supports PL2303 chip-based (Vendor ID " 0x0557, Product ID " 0x2008) USB to serial converter which is not made nor provided by LG. • It can be purchased from computer stores that carry accessories for IT support professionals.
- Page 36 EXTERNAL CONTROL DEVICE SETUP RS-232C with RS-232C Cable (Legacy) Phone jack Type • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and the TV, which is specified in the manual. * For other models, connect to the USB port. (TV) (PC) This connection can only be used for the following models: 55/47/39LN5450-UA,...
- Page 37 EXTERNALCONTROLDEVICESETUP Communication Parameters • Baud rate " 9600 bps (UART) • Stop bit 1 bit • Communication code : ASCII code • Data length " 8 bits • Parity None • Use a crossed (reverse) cable. Command reference list ,COMMA"O!,COM A"02 COMMA.D1 OMMAND2 Hexadecima,) (Hexadecimal)
- Page 38 EXTERNAL CONTROL DEVICE S ETUP Transmission / Receiving Protocol [Commandl][Command2][ ][Set ID][ ][Data][Cr] [Command 1] First command to control the TV. (j, k, m or x) Second command to control the TV. [Command 2] [Set ID] You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
- Page 39 EXTERNALCONTROLDEVICESETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) * In case of video mute on only, TV will display On Screen Display(OSD). But, in case of Screen mute I_ To control Power Off of the set. on, TV will not display OSD.
- Page 40 EXTERNAL CONTROL DEVICE SETUP 09. Tint (Command: k j) 14. Color(Colour) Temperature (Command: x u) _- To adjust the screen tint. _- To adjust colour temperature. You can also adjust You can also adjust tint in the PICTURE menu. Color(Colour) Temperature in the PICTURE menu.
- Page 41 EXTERNALCONTROLDEVICESETUP * Digital Terrestrial/Cable/Satellite Data 05: Input Source (Analogue) - 00 : Terrestrial TV (ATV) [Data 00][Data 01]: Channel Data - 01 : Cable TV (CATV) Data 00 : High Channel data * Digital Terrestrial/Cable Data 01 : Low Channel data - 00 00 ~ 27 OF (Decimal: 0 ~ 9999)
- Page 42 EXTERNAL CONTROL DEVICE SETUP 20. Control Back Light (Command: m g) [Data Ol][Data 02]: Major Channel Number Data 01: High byte Channel Data • For LCD TV / LED TV Data 02: Low byte Channel Data _- To control the back light. - 00 01 ~ 27 OF (Decimal: 1 ~ 9999) [Data 03][Data...
- Page 43 EXTERNAL CONTROL DEVICE SETUP 22.3D(Command: x t) (only 3D models) 23. Extended 3D(Command: x v) (only 3D models) (Depending on model) (Depending on model) _- To change 3D option for TV. _- To change 3D mode for TV. [Data 00] 3D option Data Structure 00 : 3D Picture Correction [Data00]...
- Page 44 Life's Good...