Table of Contents
Related Manuals for Huawei Broadband E219
Summary of Contents for Huawei Broadband E219
- Page 1 201283-M Enquiries:...
- Page 3 Ltd. Notice...
- Page 6 Q : How do I know that I am connected via the DiGi 3G connection? 1. Indicator A : Please refer to the signal bar icon at the bottom left of the Connection Manager window. It indicates whether it is connected to a GPRS, It indicates the status of the E219.
- Page 7 1. Launch the DiGi Internet Connection Manager. 3. SIM/USIM Card Slot 2. Go to ‘Tools’ > ‘Options’ > ‘Profile Management’ Holds the Subscriber Identity Module/UMTS subscriber identity module (SIM/USIM) card. 3. In the ‘Profile Management’ window, perform the setup as below: •...
- Page 8 Q : What does the blinking LED on the modem indicate? Connecting the E219 with a PC Note: First, power on the computer. Then connect the E219 with the computer. Indicator Otherwise, the E219 cannot be installed normally. The following figure is the sketch map of the data cable. Blinking (on for 100ms and The modem is powered on off for 100ms;...
- Page 9 Q : What are the laptop/PC requirements for this modem to function? Launching the Management Program A : The USB modem will operate on both a laptop or desktop PC with the After the E219 is installed, the management program is launched automatically. minimum requirements below: Then every time the E219 is connected to the PC, the management program is launched automatically.
- Page 10 DiGi Internet Safety Information Modem FAQ Read the safety information carefully to ensure the correct and safe use of your wireless device. Interference Do not use your wireless device if using the device is prohibited or when it cause danger or interference with electric devices. Medical Device •...
- Page 11 • Area indicated with the "Explosives" sign Acronyms and Abbreviations • Area indicated with the "Power off bi-direction wireless equipment" sign • Area where you are generally suggested to stop the engine of a vehicle Numeric The Third Generation Traffic Security Access Point Name •...
-
Page 12: Weee Approval
WEEE Approval The wireless device complies with the essential requirements and other relevant provisions of the Waste Electrical and Electronic Equipment Directive 2002/96/EC What should I do if I cannot access the Internet? (WEEE Directive). 1. Check the network signal strength. RoHS Approval 2. -
Page 13: Emergency Call
• Do not leave your wireless device and accessories in a place with a Note: considerably low or high temperature. For details about setting the profile, contact your service provider. • Use only accessories of the wireless device approved by the manufacturer. Creating a Dial-up Profile Contact the authorised service centre for any abnormality of the wireless device 1. -
Page 14: Regulatory Information
1. Click the Network Type tab Failure to observe these instructions could result in your RF exposure exceeding the relevant guideline limits. 2. In the Network Type drop-down combo box, select the corresponding network type 3. In the Band down-drop list box, select the corresponding frequency band Regulatory Information 4. -
Page 15: Network Settings
1. Choose Tools > Choose Device Acronyms and Abbreviations 2. Select a device in the device list • EDGE Enhanced Data Rates for GSM Evolution 3. Click OK to terminate the current terminal and switch to the selected one • GPRS General Packet Radio Service •... -
Page 16: Choosing A Device
Entering the PIN Code Software Manual When the PIN Verification is enabled, you need to enter the correct PIN code to use the network-related functions. 1. Choose Tools > PIN Operations > Enter PIN 2. Enter the correct PIN code 3. -
Page 17: Table Of Contents
Settings and Information Query PIN Operations If a SIM/USIM card is used on the terminal, the Personal Identity Number (PIN) code protects your card from unauthorised use. You can modify the PIN code and enable/disable the PIN verification. Contents Note: The PIN code and PIN Unblocking Key (PUK) code are provided along with the 1 Description of the Terminal Management GUI........... -
Page 18: Settings And Information Query
Settings and Information Query PIN Operations If a SIM/USIM card is used on the terminal, the Personal Identity Number (PIN) code protects your card from unauthorised use. You can modify the PIN code and enable/disable the PIN verification. Contents Note: The PIN code and PIN Unblocking Key (PUK) code are provided along with the 1 Description of the Terminal Management GUI........... -
Page 19: Interface Overview
Description of the Terminal Management GUI • Transfer: To view the duration of the current connection, uploaded/downloaded speed and data of the current connection. • Statistics: To view the last reset time, daily/monthly/yearly uploaded and Launching the Terminal Management downloaded data. To launch the program, double-click the shortcut icon of the Terminal Management on the desktop. -
Page 20: Internet Services
Status Information Internet Services The following table lists the status information. Status Information Description Accessing the Internet Network signal Indicates the signal strength of the network After setting the network and connection profiles, you can access the network through the Terminal Management. Network information Displays the profile of the current network To access the Internet, do as follows:...