Table of Contents
Advertisement
Administration
Diagnostics
STEP 1
STEP 2
STEP 3
STEP 4
Diagnostics
Cisco Small Business SG200 Series 8-port Smart Switch
•
LLDP—Network devices use the Link Layer Discovery Protocol to advertise
their capabilities to other devices. See LLDP-MED for information on
configuring the LLDP feature on the switch.
To configure control packet forwarding:
Click Administration > Control Packet Forwarding in the navigation window.
Select the protocol you want to configure (CDP, LLPD, or DOT1x).
Select the action that a port will take when received packets of the specified type:
•
Drop—All packets of the selected type are dropped.
•
Forward—All packets of the selected type are forwarded within the
specified VLAN. This is the default action for CDP packets.
•
Terminate—The packet is accepted and processed on the switch. This is
the default action for LLDP and DOT1X packets and is not available for CDP
packets.
Click Apply. Your changes are saved to the Running Configuration.
You can use the diagnostics pages to perform virtual cable tests for copper and
fiber optics cables, set up a diagnostic monitor for a port or VLAN, and to view
CPU utilization data.
See the following topics for more information on the configuration pages available
in the Administration > Diagnostics menu:
•
Testing Copper Ports
•
Configuring Port and VLAN Mirroring
•
CPU/Memory Utilization
3
76
Hide quick links:
Advertisement
Table of Contents
