Saving Your Router Configuration; Saving Backup Copies Of Configuration And System Image - Cisco 2900 series Installation Manual
2900/3900 series
Hide thumbs
Also See for Cisco 2900 series:
- Installation manual (222 pages) ,
- Datasheet (16 pages) ,
- Manual (111 pages)
Table of Contents
Advertisement
Verifying Network Connectivity
The following display shows sample output for the ping command when you ping the IP hostname
donald:
Router# ping donald
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.7.27, timeout is 2 seconds:
!!!!!
Success rate is 100 percent, round-trip min/avg/max = 1/3/4 ms
Saving Your Router Configuration
This section describes how to avoid losing your configuration at the next system reload or power cycle
by saving the running configuration to the startup configuration in NVRAM. The NVRAM provides
256KB of storage on the router.
SUMMARY STEPS
1.
2.
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
copy running-config startup-config
Example:
Router# copy running-config startup-config
Saving Backup Copies of Configuration and System Image
To aid file recovery and minimize downtime in case of file corruption, we recommend that you save
backup copies of the startup configuration file and the Cisco IOS software system image file on a server.
Cisco 2900 and 3900 Series Hardware Installation
4-22
enable
copy running-config startup-config
Purpose
Enables privileged EXEC mode.
Enter your password if prompted.
•
Saves the running configuration to the startup
configuration.
Chapter 4
Configuring the Router
OL-18712-01
Hide quick links:
Advertisement
Chapters
Table of Contents
