Table of Contents
Advertisement
Chapter 6
Making Network Connections
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
For more information about using the show interface command, see the Cisco 1000 Series Connected
Grid Routers Software Configuration Guide.
Additional Router Connections
This section provides information about making other, additional router cable connections. Follow the
procedures in this section based on your network configuration and requirements. This section contains
these procedures:
•
•
•
•
•
OL-26438-02
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions
DCD=down
DSR=down
DTR=down
Connecting the Console Port, page 6-8
Connecting the Serial Port, page 6-9
Connecting the USB Port, page 6-10
Connecting the Alarm Port, page 6-11
Installing Modules and Antennas, page 6-13
RTS=down
CTS=down
Cisco 1120 Connected Grid Router Hardware Installation Guide
Additional Router Connections
6-7
Hide quick links:
Advertisement
Table of Contents
