Table of Contents
Advertisement
Safety Recommendations
Take care when connecting units to the supply circuit so that wiring is not overloaded. Statement 1018
Warning
Installation of the equipment must comply with local and national electrical codes. Statement 1074
Warning
This unit is intended for installation in restricted access areas. A restricted access area can be
Warning
accessed only through the use of a special tool, lock and key, or other means of security.
Statement 1017
Warning
Blank faceplates and cover panels serve three important functions: they prevent exposure to
hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI)
that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not
operate the system unless all cards, faceplates, front covers, and rear covers are in place.
Statement 1029
Warning
Read the installation instructions before connecting the system to the power source. Statement 1004
Safety Recommendations
Follow these guidelines to ensure general safety:
•
•
•
•
•
Cisco 1120 Connected Grid Router Hardware Installation Guide
2-2
Keep the chassis area clear and dust-free during and after installation.
Keep tools and chassis components away from walk areas.
Do not wear loose clothing that could get caught in the chassis. Fasten your tie or scarf and roll up
your sleeves.
Wear safety glasses when working under conditions that might be hazardous to your eyes.
Do not perform any action that creates a hazard to people or makes the equipment unsafe.
Chapter 2
Installation Safety and Site Preparation
OL-26438-02
Hide quick links:
Advertisement
Table of Contents
