Thank you for purchasing a telephone from GE Communications Products. Your new telephone is a carefully engineered, highquality, durable product with natural sound quality, modern features and elegant you expect in a telephone. To familiarize yourself with all the features of instructions carefully.
Page 4
INTRODUCTION A cordless telephone offers convenience, mobility during telephone communications. however, is dependent upon the availability of AC power. Any interruption of electrical power at your location would prevent your placing or receiving calls. Therefore, a should not be installedas...
Twenty Five Automatic Channel Selection Dual Wavem Noise Filter - A two stage filtering system that removes unwanted signals. Compandor Noise Reduction extends the effective range, and helps to eliminate static and interference. Automatic Digital Security System prevents false+ringing from other cordless telephones Wall or Desk Mountable Base Tone/Pulse Switchable...
RECHARGE CONTACTS FIXED BASE ANTENNA CHARGE INDICATOR HANDSET HOOK — when wall mounted. STRAIN RELIEF – Power Supply Cord so cord will remain plugged in properly to the base. WER ADAPTER PULSE flONE SWITCH either Tone or Pulse (Rotary) sewice. RUBBER HANDSET RECHARGE...
AC POWER SUPPLY CORD must be fed through the STRAIN RELIEF on bottom of base to prevent cord slippage. (see inset). Note: Use only GE AC ADAPTER and POWER SUPPLY CORD Model #5-2346 with this product. iS required.’ - ‘-...
Page 9
5. Plug other end of the AC into an electrical outlet which cannot CORD be switched off. Do not use and outlet that can be turned and oti by a wall switch. Note: Whenever a power outage occurs, or batteries are replaced, the be returned to the BASE code.
INSTALLATION Insed antenna and screw into place. Wrap TELEPHONE LINE CORD around cord wrap leaving 1-2 inches of cord free in the center. Plug the smaller “L’ shaped end of the AC ADAPTER into back of unit. Guide AC POWER SUPPLY CORD through Channel on top so cord threads through CORD WRAP and...
Page 11
Plug POWER SUPPLY CORD into AC outlet. Your GE Cordless Phone comes with a nickel cadmium rechargeable batte~ Handset). automatically HANDSET is placed in the BASE CRADLE. When fully charged, the battery power to enable the HANDSET to CRADLE for prolonged periods and still function properly.
TELEPHONE OPERATION To Receive a Call Pick-up the HANDSET button (phone light will be “ON”). 2. Press PHONE 3. When finished, press PHONE button to hang Make a Call Pick up the HANDSET. Press ~HONE button. (phone light will be “ON”) Wait for dial tone.
TELEPHONE OPERATION This button is used to activate customer calling sewices available through your local phone company, such as Call Transfer and Call Waiting, etc. These services generally monthly fee. If you subscribe to any of these services, refer to the phone company’s instructions on how to use Flash. the PHONE Notes: Do not use services because you will hang-up the phone.
Your Cordless Phone can store up to ten (10) telephone numbers to 16 digits long that can be dialed automatically. Memory Storage must be programmed and the ringer “ON”. sTORING Pick up the HANDSET. STORE. press Enter the number to be stored. press STORE.
TELEPHONE MEMORY Used for storing a momentary delay in the dialing sequence of a stored telephone number. This is generally “PAUSE” is needed to wait for a dial tone (e.g. after dialing 9 for an outside line) or a computer tone (e.g. for some long distance services).
PRODUCT CARE The antenna of your GE Cordless Phone is designed easy replacement in the event it is damaged. 1. Turn the base of the A~TEN~A Antenna will come loose. 2. Lifi out. Insert REPMCEMENT screw into place. To keep your telephone...
In case of difficulty, check the following before seeking service. PROBLEM No Dial Check Installation: Tone — Is BASE POWER CORD connected to a working outlet? — Is CHARGING — Do not use an outlet that can be turned ON and OFF by a wall —...
SERVICE requires this product be serviced authorized service agents. In accordance with FCC requirements, or modifications not expressly approved could void the user’s authority to operate this product. For instructions on how tO obtain service, refer to the warranty included in this Guide or call tinsumer Information 1-80W84329.
2-9530 DESCRIPTION CATALOG NUMBER BT-12 NICKEL “-’’:’> ~~~N”A 5-2346 & ADAPTER card Purchases For credit Your complete charge card number, its expiration date and your signature are necessary to process all charge card orders. Copy your complete account your VISA card.
Page 21
ACCESSORY ORDER FORM lfill your cornrnunicatin needs and en ante your lifestyle, &ension phones, main phones, cordless phones and answering systems is available. Just stop your nearest retailer and ask to see the wi e range of All are care lly en ineered to offer you high uality anke~n~bili~ 7 eatures, and e egant sty i;g at an affordable price.
FCC REGISTRATION Your GE telephone equipments registered with the Federal Communications Commission and is Irrcornphance with parts IS and 66, FCC Rules and Regulations. Notification 10 the bcal Telephone company On the bottom of this equipment is a label indicating among ofher Information, the FCC Registration number and Ringer EquWence Num&r (REN) for the equipment.