Ewag Configuration; Creating And Configuring The Ewag Service; Creating The Ewag Service - Cisco ASR 5000 Administration Manual
Enhanced wireless access gateway
Hide thumbs
Also See for ASR 5000:
- Administration manual (466 pages) ,
- Installation manual (294 pages) ,
- Installation procedure (8 pages)
Table of Contents
Advertisement
Enhanced Wireless Access Gateway Configuration
eWAG Configuration
This section describes how to configure the eWAG service.
1. Create and configure the eWAG service as described in the
section.
2. Create and configure an APN for eWAG as described in the
3. Create and configure an SGTP service for eWAG as described in the
4. Configure the NAT in-line service for eWAG as described in the
5. Save your configuration to the flash memory, an external memory device, and/or a network location using the
Exec Mode command
configuration files, refer to the System Administration Guide and the Command Line Interface Reference.
Important:
that the most common or likely commands and/or keyword options are presented. In many cases, other optional
commands and/or keyword options are available. Refer to the Command Line Interface Reference for complete
information regarding all commands.
Creating and Configuring the eWAG Service
This section describes how to create and configure an eWAG service.
Creating the eWAG Service
Configuring the eWAG Service
Creating the eWAG Service
To create the eWAG service use the following configuration:
configure
context <context_name> [ -noconfirm ]
ipsg-service <ipsg_service_name> mode radius-server ewag [ -noconfirm ]
end
Notes:
The
ewag
Server Configuration Mode, which is common for the eWAG and IPSG services.
You can configure a maximum of 64 eWAG/IPSG services in the system, one per context. Only one IPSG
service must be configured per context. Multiple eWAG services must not be configured in the same context as
they will not be able to differentiate between uplink and downlink packets.
OL-28188-02
save configuration
Commands used in the configuration examples in this section provide base functionality to the extent
keyword enables the eWAG service (IPSG service in eWAG mode), and enters the IPSG RADIUS
Creating and Configuring the eWAG Service
Configuring the APN
Configuring the SGTP Service
Configuring NATALG Support
. For additional information on how to verify and save
Cisco ASR 5000 Enhanced Wireless Access Gateway Administration Guide ▄
eWAG Configuration ▀
section.
section.
section.
41
Advertisement
Table of Contents
