ã= Safety instructions Warning Knives and other utensils with sharp points Delivery must be placed horizontally in the cutlery drawer. – Check the packaging and dishwasher immediately for damage caused in Children in the household transit. Do not switch on a damaged appliance, but contact your supplier.
Childproof lock (door lock) * Getting to know your The description of the childproof lock is at appliance the back in the envelope. * depending on model Diagrams of the control panel and the interior of the appliance can be found in Damage the envelope at the front.
Overview of menu To change the language: – Open the door. The settings can be found in the individual – Switch on ON/OFF switch (. chapters. – Hold down programme button # and Water Hardness : press START button )" until the digital display 8 Intensive drying : : ...
Water hardness table Water softening system :DWHU +DUGQHVV PPROO 6HW YDOXH To ensure good washing results, the KDUGQHVV UDQJH RQ WKH dishwasher requires soft water, i.e. YDOXH PDFKLQH containing low amounts of lime, otherwise &ODUNH white limescale will be deposited on the ¯¯...
Switching off salt refill indicator/ Special salt $ water softening system If the salt refill indicator H is impaired Using special salt (e.g. when using combined detergents Always refill with special salt immediately containing salt component), it can be before switching on the appliance. This switched off.
Setting amount of rinse aid Rinse aid % The amount of rinse aid can be set from to : . Please set rinse aid on As soon as the rinse-aid refill indicator P to obtain very good drying results is lit on the fascia, there is still a rinse-aid is already set in factory).
Loading the dishwasher Utensils – Remove large food remnants. It is not necessary to prerinse utensils under Not suitable running water. – Cutlery and utensils made of wood. – Place the utensils so that – Delicate decorative glasses, craft and –...
Pans Cutlery drawer Bottom basket 9" Arrange the cutlery in the cutlery drawer 1* as illustrated. Separately arranged utensils are easier to remove after washing. The drawer can be taken out. Folding spikes * * depending on model The spikes can be folded down to improve Heavily soiled utensils (pans) should arrangement of pans, bowls and glasses.
– Pull out the top basket 12 out. Small accessories holder * – To lower the basket, press in the left * depending on model and then the right lever on the outside Light-weight plastic accessories, e.g. cups, of the basket. In doing so, hold the lids, etc.
Adding detergent Detergent – If the detergent dispenser 92 is still closed, press the lock 9: to open the You can use tablets as well as powder detergent dispenser. or liquid detergents for dishwashers, but Pour detergent into the dry detergent never use washing up liquid.
Notes If the utensils are only lightly soiled, slightly – You will obtain optimum rinsing less than the indicated amount and drying results by using solo of detergent is usually adequate. detergents and applying salt and rinse aid separately. Suitable detergents and care products can be purchased online via our website –...
Overview of programmes The max. possible number of programmes is illustrated in this overview. The corresponding programmes for your appliance can be found on the fascia. Type of utensils Type of soiling Programme Possible additional Programme sequence options ¹ very adhesive burned- pots and pans, in or dried-on food non-sensitive...
¿ Extra drying * Additional options An increased temperature during the final * depending on model rinse and an extended drying phase Additional options can be set with the ensure that even plastic parts dry better. buttons h. There is a slight increase in the energy consumption.
ã= Washing the dishes Warnings – Please ensure that the intake opening Programme data 1J is not obstructed and do not place any temperature-sensitive utensils in The programme data (consumption the lower basket at the rear right side values) can be found in the summary of above the blow opening 1R.
Display window End of programme Apart from information on the programme The programme has ended when the sequence, the display window )2 also value is indicated on the numerical display 8. indicates additional information on e.g. spray pressure. The end of the programme is also If you would no longer like to have this indicated by an acoustic signal.
Automatic switch off after end of Switching off the appliance programme or interior light* Short time after the end of the programme: * depending on model – Open the door. – Switch off ON/OFF switch (. To save energy, the dishwasher can be automatically switched off 1 min or 120 –...
Changing the programme Maintenance and care When the START button )" has been pressed, the programme cannot be A regular inspection and maintenance of changed. your machine will help to prevent faults. The only way a programme can be This saves time and prevents problems. changed is by Cancel programme (Reset).
Filters Spray arms The filters 1j keep large foreign objects Limescale and contaminants in the rinsing in the rinsing water away from the pump. water may block nozzles and bearings on the spray arms 1: and 1Z. These foreign objects may occasionally block the filters.
Waste water pump Troubleshooting Large food remnants in the rinsing water not retained by the filters may block the The majority of faults which could occur in waste water pump. The rinsing water is daily operation can be rectified by the then not pumped out and covers the filter.
... when the appliance is – Filter in the water supply blocked. – Switch off the appliance and pull switched on out the mains plug. The appliance does not start. – Turn off the tap. – The mains fuse has tripped. –...
... during the wash cycle White stains on the utensils/glasses remain milky. Unusual foam formation. If phosphate-free detergents are used with – Handwash liquid in the rinse aid hard tap water, white deposits may be dispenser. deposited more easily on utensils and Spilled rinse aid causes excessive the container walls.
Customer service Installation If the advice given does not resolve your The dishwasher must be connected problem, please contact your customer correctly, otherwise it will not function service. Contact details can be found on properly. The specifications for the inlet the back cover of this instruction manual and outlet as well as the electrical or in the enclosed customer service list.
– Some models: – A built-under or integrated appliance which is installed subsequently as a The plastic housing on the water free-standing appliance must be connection contains an electric valve, secured to prevent it from overturning, the connecting cables are in the supply e.g.
Warm water connection * Electrical connection * depending on model – Connect the appliance to an alternating current only, ranging from 220 V to The dishwasher can be connected to cold 240 V and 50 Hz or 60 Hz via or hot water up to max.
Transportation Waste disposal Empty the dishwasher and secure loose parts. Both the packaging of new appliances and Drain the appliance according to the the old appliances themselves contain following steps: valuable raw materials and recyclable materials. – Turn on the tap. Please dispose of the individual parts –...