Table of Contents Chapter 1 TOSHIBA Legal, Regulatory and Safety Copyright, Disclaimer and Trademarks ..........1-1 Regulatory Information ................. 1-2 Video Standard Notice ................1-7 OpenSSL Toolkit License Issues ............1-7 FreeType License Issues ..............1-10 Disposing of the computer and the computer's batteries ....1-13 General Precautions ................
Page 3
Utilities and Applications ..............5-1 Special features ..................5-4 TOSHIBA Password Utility ..............5-6 TOSHIBA System Settings ..............5-9 TOSHIBA Media Player by sMedio TrueLink+ ........5-10 TOSHIBA PC Health Monitor .............. 5-11 TOSHIBA Setup Utility ................ 5-12 System Recovery ................5-13...
® The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Toshiba Corporation and its affiliates is under license. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
TV reception. Shielded cables must be used between the external devices and the computer’s HDMI(micro) port, Universal Serial Bus (USB 3.0) port as well as the HDMI port and External RGB monitor port on the TOSHIBA Keyboard Dock. Changes or modifications made to this equipment, not expressly approved by TOSHIBA or parties authorized by TOSHIBA could void the user’s authority to operate the equipment.
EMC (Electromagnetic Compatibility) and safety standards. However, TOSHIBA cannot guarantee that this product still observes these EMC standards if options or cables not produced by TOSHIBA are connected or implemented. In this case the persons who have connected/implemented those options/cables have to provide assurance that the system (PC plus options/cables) still fulfils the required standards.
Page 8
Note that Canadian Department of Communications (DOC) regulations provide, that changes or modifications not expressly approved by TOSHIBA Corporation could void your authority to operate this equipment. This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
The new European Union (EU) chemical regulation, REACH (Registration, Evaluation, Authorization and Restriction of Chemicals), entered into force on 1 June 2007. TOSHIBA will meet all REACH requirements and is committed to provide our customers with information about the chemical substances in our products according to REACH regulation.
For more detailed information about recycling of this product, please visit our website (http://www.toshiba- india.com) or contact call center (1800-200-8674). These symbols may not stick depending on the country and region where you purchased.
Page 11
------------------------ /*===================================================== Copyright (c) 1998-2011 The OpenSSL Project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Page 12
---------------------------------- /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved. This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was written so as to conform with Netscapes SSL. This library is free for commercial and non-commercial use as long as the following conditions are aheared to.
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Page 14
Finally, many people asked us for a preferred form for a credit/disclaimer to use in compliance with this license. We thus encourage you to use the following text: """ Portions of this software are copyright (C) <year> The FreeType Project (www.freetype.org).
Page 15
source and object code forms) and derivative works thereof for any purpose; and to authorize others to exercise some or all of the rights granted herein, subject to the following conditions: Redistribution of source code must retain this license file (`FTL.TXT') unaltered;...
Disposing of the computer and the computer's batteries Contact an authorized TOSHIBA service provider for details regarding how to dispose of the computer and the batteries. General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer.
Rapid changes in temperature or humidity and sources of temperature change such as air conditioner vents or heaters. Extreme heat, cold, or humidity. Liquids and corrosive chemicals. Stress injury Carefully read the Instruction Manual for Safety and Comfort. It contains information on the prevention of stress injuries to your hands and wrists that can be caused by extensive keyboard use.
You can clean the display screen by spraying a small amount of glass cleaner onto a soft, clean cloth and then wiping the screen gently with the cloth. Never spray cleaner directly onto the computer or let liquid run into any part of it.
Safety Icons Safety icons are used in this manual to bring important information to your attention. Each type of message is identified as shown below. Indicates a potentially hazardous situation, which could result in death or serious injury, if you do not follow instructions. A caution informs you that improper use of equipment or failure to follow instructions may cause data loss, equipment damage, or may result in minor or moderate injury.
Some of the features described in this manual may not function properly if you use an operating system that was not pre-installed by TOSHIBA. Equipment checklist Carefully unpack your computer, taking care to save the box and packaging materials for future use.
Series Model Name Operating Mode Supported PORTÉGÉ Z10t-A Laptop mode: when TOSHIBA Keyboard Dock is docked Tablet mode: when TOSHIBA Keyboard Dock is undocked WT310 Tablet mode only Conventions This manual uses the following formats to describe, identify, and highlight terms and operating procedures.
To use the computer in laptop mode, you need to connect TOSHIBA Keyboard Dock to the computer by following the steps below: Hold the computer with two hands on both the left and right sides.
Page 23
Press down the computer until it clicks into place. The docking connector on the keyboard dock engages the docking interface on the computer. Figure 2-1 Connecting the keyboard dock Please close the display screen when you move or are carrying the computer.
DC power and reduces the voltage supplied to this computer. Always use the TOSHIBA AC adaptor that was included with your computer, or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor could cause fire or damage to the computer possibly resulting in serious injury.
Page 25
The supplied power cord conforms to safety rules and regulations in the region the computer is bought and should not be used outside this region. For use in other regions, please buy power cords that conform to safety rules and regulations in the particular region. Do not use a 3-pin to 2-pin conversion plug.
Connect the AC adaptor’s DC output plug to the DC IN 19V jack. Figure 2-5 Connecting the DC output plug to the computer (laptop mode) 1. DC IN 19V jack 2. DC output plug Computer appearance depends on the model you purchased. Figure 2-6 Connecting the DC output plug to the computer (tablet mode) 1.
Figure 2-7 Turning on the power (laptop mode) 1. Power button Computer appearance depends on the model you purchased. Figure 2-8 Turning on the power (tablet mode) 1. Power button Computer appearance depends on the model you purchased. Initial setup The Windows 8 Startup Screen will be the first screen displayed when you turn on the power.
Page 28
everything from your favorite apps and Web sites to your contacts and other important information. From the Start screen, you can just start typing to search for what you want. From there, you can easily switch between results for apps, files, and more.
Turning off the power The power can be turned off in one of the following modes, either Shut Down Mode, Sleep Mode or Hibernation Mode. Shut Down Mode When you turn off the power in Shut Down Mode, no data will be saved and the computer will boot to the operating system's main screen the next time it is turned on.
Please note that keyboard keys can only be used if the Wake-up on Keyboard option is enabled within the TOSHIBA System Settings. If the computer enters Sleep Mode while a network application is active, the application might not be restored when the computer is next turned on and the system returns from Sleep Mode.
Close the display panel. Please note that this feature must be enabled within the Power Option. Press the power button. Please note that this feature must be enabled within the Power Options. When you turn the power back on, you can continue where you left when you shut down the computer.
Allows the use of the panel power off feature. Starting Hibernation Mode To enter Hibernation Mode, follow the steps below. Click the Settings charm. Click Power and then select Hibernate. In order to show Hibernate in Power menu, you need to setup according to the following steps: 1.
Chapter 3 The Grand Tour This chapter identifies the various components of the computer - it is recommended that you become familiar with each before you operate the computer. Legal Footnote (Non-applicable Icons) For more information regarding Non-applicable Icons, please refer to the Legal Footnotes section.
Page 34
Figure 3-1 The computer in tablet mode 1. Display screen 15. HDMI(micro) port 2. Web Camera (front) 16. Memory media slot 3. Web Camera LED 17. SIM card slot* 4. Ambient light sensor (not shown) 18. DC IN 19V jack 5.
Page 35
Display screen 29.5cm (11.6") LCD screen, configured with the following resolutions: FHD, 1920 horizontal x 1080 vertical pixels Please be aware that, when the computer is operating on the AC adaptor, the image displayed on the internal screen will be somewhat brighter than when it operates on battery power.
Page 36
Force Shut down hole Insert a slender object such as a needle into this hole to force shut down the computer when the system is hang up. Orientation lock Press to lock/unlock automatic rotation of the button screen orientation. Volume up/down Press these buttons to increase or decrease the buttons volume.
Page 37
AC adaptor can cause damage to the computer. Docking interface This interface enables the connection of the keyboard dock and the optional cradle described Optional TOSHIBA Accessories section. Hook holes Designed for engaging the hooks on the keyboard dock and ensuring a firm connection.
Page 38
The stereo speakers will be disabled after your computer is connected to the optional cradle described in Optional TOSHIBA Accessories section and the audio output is routed through the 3.5mm audio out jack on the cradle.
Figure 3-2 Front view of the keyboard dock 1. Touch Pad 7. AccuPoint 2. Touch Pad ON/OFF indicator 8. Computer holder 3. TOSHIBA eco indicator 9. Hook 4. Touch Pad control button 10. Docking connector 5. Touch Pad control button 11.
Page 40
Touch Pad ON/OFF Double tap this indicator to enable/disable the indicator Touch Pad. TOSHIBA eco Double tap to enable/disable TOSHIBA eco indicator Utility. Touch Pad control The two buttons above the Touch Pad are used buttons...
Page 41
Docking connector Connects to the computer. Eject button Begins the computer’s disconnect sequence. Once the eject button is pressed and the computer cannot communicate with external devices connected to the keyboard dock. Undock and re-dock the computer to re-establish communication. DC IN 19V jack The AC adaptor connects to this jack in order to power the computer and charge its internal...
USB port. Foreign metal objects can create a short circuit, which can cause damage and fire, possibly resulting in serious injury. The Computer (laptop mode) The following figure shows the front of the computer when TOSHIBA Keyboard Dock is connected. Figure 3-5 Front view of the computer (display panel closed) Product appearance depends on the model you purchased.
The capacity of the Solid State Drive varies depending on the model. To check which type of SSD is included in your model, open the TOSHIBA PC Health Monitor by clicking Desktop -> Desktop Assist -> Support & Recovery -> PC Health Monitor, and then click PC Information.
Page 44
In this manual, the word "HDD" or "Hard disk drive" also refers to the SSD unless otherwise stated. SSD is a large-capacity storage media which uses Solid-State Memory in place of a magnetic disk of the hard disk. Under certain unusual conditions of prolonged non-use and/or exposure to high temperatures, the SSD may be vulnerable to data retention errors.
You can launch the BIOS setup utility to enable/disable the function and change the specified time setting from Sleep Mode to Hibernation Mode. Launch the BIOS setup utility. Please refer to TOSHIBA Setup Utility section for further information. Select Power Management. Enable/Disable Intel(R) Rapid Start Technology function.
® When Intel Rapid Start Technology is enabled, switching from Sleep Mode to Hibernation Mode consumes power. When you carry your computer aboard on an aircraft or in places where electronic devices are regulated or controlled, always power off your computer. ®...
Power on Power off (no operation) AC adaptor Remaining • Operates battery capacity • LED: off connected is above low battery trigger point Remaining • Operates battery capacity • LED: flashes is below low amber battery trigger point Remaining Computer shuts battery capacity down is exhausted...
Page 48
Flashing white Indicates that the computer is in Sleep Mode and that there is sufficient power available (AC adaptor or battery) to maintain this condition. No light Under any other conditions, the indicator does not light. User's Manual 3-16...
Chapter 4 Operating Basics This chapter describes the basic operations of your computer, highlights the precautions that should be taken when using it. Operating in Tablet Mode When operating the computer in tablet mode, follow the instructions below. Figure 4-1 Operating the computer Hold the computer firmly on your forearm.
Landscape mode. The computer is in laptop mode. The computer is connected to the optional cradle described in Optional TOSHIBA Accessories section. Avoid having direct contact with the other edges of the hand held device while the wireless device is turned on and transmitting.
Calibrating digital compass If you have downloaded a compass application to use this feature, please note that the performance of any compass feature will vary depending on environmental conditions. For example, any source using electromagnetic or radio waves. Before using any compass feature the compass needs to be calibrated for accuracy.
Do not use a protecting sheet for the touch screen as it may decrease its sensitivity to gestures. Using the Touch Pad The Touch Pad located on the TOSHIBA Keyboard Dock may support the following gestures: Tap once on the touch pad to active an item, such as an app.
Some of the touch pad operations described in this section are only supported in certain applications. TOSHIBA Pointing Device AccuPoint To use the AccuPoint, simply push it with your finger tip in the direction you want to move the on-screen pointer.
AccuPoint precautions Certain conditions can affect the on-screen pointer when using AccuPoint. For example, the pointer may travel contrary to AccuPoint operation or an error message may appear, if You touch the AccuPoint during power-up. You apply constant, soft pressure during power-up. There is a sudden temperature change.
Page 55
Figure 4-7 Stylus Pen Figure 4-8 Reserve Pen 1. Pen point 3. Eraser button 2. Pen button Pen point Provides the same function as left clicking the mouse once. Pen button Provides the following function: Right-clicking: Press and hold this button and touch the tip of the pen to an object.
Page 56
The pen tip of the Reserve Pen cannot be replaced if it is worn. You can purchase a new one from a TOSHIBA authorized dealer. You can change the pen settings in Pen and Touch. To access it, click Desktop ->...
It is recommended that you keep another pen set as a spare. You can buy replacement pen sets from your TOSHIBA authorized dealer. TOSHIBA is not liable for any problems arising on the products due to the use of the pen in an environment where the above conditions are not satisfied or because of its use by unspecified number of users.
Single tap Lightly tap the tip of the pen on an object and lift it immediately to execute an action. A single tap is similar to left clicking the mouse once. Double tap Lightly tap the tip of the pen twice on an object and lift it immediately to execute an action.
Stylus Pen. When these refills have run out, you can purchase a new pen set from a TOSHIBA authorized dealer. A short and worn pen point is difficult to pull out. Replace the pen point with a refill before it becomes too short to remove.
CAPS LOCK This indicator glows green when letter keys are locked into their uppercase format. Function Key The function keys (F1 ~ F12) are the twelve keys at the top of your keyboard. The following specific functions are executed when the function keys are pressed in combination with the FN key.
Some functions will show the toast notification at the edges of the screen. Those toast notifications are disabled at factory default. You can enable them in the TOSHIBA Function Key application. To access it, click Desktop -> Desktop Assist -> Tools & Utilities ->...
Numeric Mode To turn on Numeric Mode, press FN + F11 - you are able to access numeric characters by using the keys. You are able to press FN + F11 again to turn off this overlay function. Temporarily using normal keyboard (overlay on) While using the overlay, you can temporarily access the normal keyboard functions without having to turn the overlay off: Hold down FN key and press any other key - this key will operate as if...
The computer's RTC battery is a Ni-MH battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed. Dispose of the battery as required by local ordinances or regulations.
Charge the battery pack only in an ambient temperature between 5 and 35 degrees Celsius. Otherwise, the electrolyte solution might leak, battery pack performance might deteriorate and the battery life might be shortened. Charging the batteries When the power in the battery pack becomes low, the Battery indicator will flash amber to indicate that only a few minutes of battery power remain.
The Battery indicator may show a rapid decrease in battery operating time when you try to charge a battery under the following conditions: The battery has not been used for a long time. The battery has completely discharged and been left in the computer for a long time.
How you use optional devices, such as a USB device, to which the battery supplies power. Whether you enable Sleep Mode, which can conserve battery power if you are frequently turning the computer off and on. Where you store your programs and data. Whether you close the display panel when you are not using the keyboard - closing the display saves power.
Wireless WAN Device Some computers are equipped with the Wireless WAN device. This device gives you the ability for a high-speed connection to the Internet, corporate intranet, and your email while you are away from the office. Installing a SIM Card To install a SIM card, follow the steps as detailed below: Click Power in the Settings charm, and then click Shut down and ensure that the Power indicator is off...
Insert the SIM card tray into the SIM card slot, and push the center of the tray to close it. Press gently until it locks into place. Figure 4-15 Inserting the SIM card 1. SIM card slot 3. SIM card tray 2.
The Link speed (10/100/1000 megabits per second) changes automatically depending on the network conditions (connected device, cable or noise and so on). LAN cable types The computer must be configured properly before connecting to a LAN. Logging onto a LAN using the computer’s default settings could cause a malfunction in LAN operation.
Plug one end of the cable into the LAN jack. Press gently until you hear the latch click into place. Figure 4-16 Connecting the LAN cable 1. LAN jack 2. LAN cable Plug the other end of the cable into a LAN hub connector or router. Check with your LAN administrator and hardware or software vendor before using or configuring a network connection.
MultiMediaCard (MMC) Points to note about the memory media card SD/SDHC/SDXC memory cards comply with SDMI (Secure Digital Music Initiative), which is a technology adopted to prevent unlawful copy or playback of digital music. For this reason, you cannot copy or playback protected material on another computer or other device, and you may not reproduce any copyrighted material except for your personal enjoyment.
Do not twist or bend cards. Do not expose cards to liquids or store in humid areas or lay media close to containers of liquid. Do not touch the metal part of a card or expose it to liquids or let it get dirty.
Figure 4-18 Removing the dummy card 1. Memory media slot 2. Dummy card Turn the memory media so that the contacts (metal areas) face up. Insert the memory media into the memory media slot on the side of the computer. Figure 4-19 Inserting a memory media 1.
Point to memory media and click the left Touch Pad control button. Push the memory media until you hear a click to partially release it. Grasp the memory media and remove it. Insert the dummy card back into the slot. If you remove the memory media or turn off the power while the computer is accessing the memory media, you may lose data or damage the media.
Figure 4-20 Connecting the RGB cable to the External RGB monitor port 1. External RGB monitor port 2. RGB cable There are no fastening screws for an external monitor cable on the External RGB monitor port. However, external monitor cables which have connectors with fastening screws can still be used.
Page 76
Figure 4-21 Connecting the HDMI port on the computer 1. HDMI(micro)port 2. HDMI cable (Type D connector) Figure 4-22 Connecting the HDMI port on the keyboard dock 1. HDMI port 2. HDMI cable (Type A connector) Please do not plug/unplug an HDMI display device under the following conditions: The system is starting up.
2. In the Playback tab, select the playback device which you want to switch to. 3. To use the internal speakers on your computer, select Speakers. To use the television or the external monitor that you have connected to the computer, select a different playback device.
USB & HDMI ports LAN jack Stylus Pen Stylus Pen can be purchased from your TOSHIBA dealer for use as spare items (spare pen tips and a tip draw-out tool are included). Reserve Pen Reserve Pen can be purchased from your TOSHIBA dealer.
Volume Mixer The Volume Mixer utility lets you control the audio volume for playback of devices and applications under Windows. To launch the Volume Mixer utility, click Desktop and right click on the speaker icon on the Taskbar, and then select Open Volume Mixer from the sub menu.
Information Click the Information button to view hardware information, software information, and language setting. Power Management The audio controller in your computer can be turned off when the audio function is not used. To adjust the configuration of audio power management, click the Power Management button When audio power management is enabled, the circle button at the upper left of the Power Management is blue and convex.
Video mode Video mode settings are configured via the Screen Resolution dialog. To open the Screen Resolution dialog, click Desktop -> Desktop Assist - > Control Panel -> Appearance and Personalization -> Display -> Change display settings. If you are running some applications (for example a 3D application or video playback), you may see some disturbance, flickering or frame dropping on your screen.
Assist. The Desktop Assist icon is located in the taskbar of the Desktop. Furthermore, some utilities can also be launched from Start screen and desktop shortcut. TOSHIBA Desktop TOSHIBA Desktop Assist is a graphical user Assist interface that provides access to specific tools and TOSHIBA utilities and applications that make the use and configuration of the computer easier.
Page 83
TOSHIBA Display TOSHIBA Display Utility includes Desktop Text Utility Size utility, Split Screen utility and Other Settings. Desktop Text Size allows you to make the text size bigger or smaller on the desktop according to your usage and favorite. You can change the text size on the display and on the title bar of windows by changing the scaling of the text size.
Page 84
To access this utility, click Desktop -> Desktop Assist -> Tools & Utilities -> eco Utility. For details on TOSHIBA eco utility, see the help file. TOSHIBA Media This software is a multimedia player which can Player by sMedio be used to play back video, music and photo.
To access the setup files of the drivers/utilities, type Applications from the Start screen, and then click Applications and Drivers from the list that appears. TOSHIBA Media Player by sMedio TrueLink+ application is not included in the setup files above but can be downloaded from Windows Store. Special features The following features are either unique to TOSHIBA computers or are advanced features which make the computer more convenient to use.
Page 86
SSD automatic power This feature automatically cuts off power to the Solid State Drive when it is not accessed for a specified time, with power being restored when the Solid State Drive is next accessed. This can be specified in the Power Options. Intel AT Intel Anti-Theft Technology (Intel AT) is an embeded, hardware-based security feature that...
In this instance all unsaved data in memory will be lost. TOSHIBA Password Utility The TOSHIBA Password Utility provides two levels of password security: User and Supervisor. User's Manual...
Passwords set by the TOSHIBA Password Utility function are different from the Windows password. User Password To start the utility, click the following items: Desktop -> Desktop Assist -> Tools & Utilities -> Password Utility -> User Password User authentication may be required to validate user rights when using TOSHIBA Password Utility to delete or change passwords, etc.
If you forget your HDD User Password, TOSHIBA will NOT be able to assist you, and your HDD will be rendered COMPLETELY and PERMANENTLY INOPERABLE. TOSHIBA will NOT be held responsible for any loss of any data, any loss of use or access to your HDD, or for any other losses to you or any other person or organization that result from the loss of access to your HDD.
To run TOSHIBA System Settings, click Desktop -> Desktop Assist -> Tools & Utilities -> System Settings. The TOSHIBA System Settings window contains a number of tabs to allow specific functions of the computer to be configured. In addition there are also three buttons: OK, Cancel and Apply.
Make sure to restart your computer immediately to apply these changes. TOSHIBA Media Player by sMedio TrueLink+ Please be aware of the following limitations when you use the TOSHIBA Media Player by sMedio TrueLink+: Notes on use This software is a multimedia player which can be used to play back video, music and photo.
Operating TOSHIBA Media Player by sMedio TrueLink+ The steps for playing a video file on a local library: Click My Local Library on the Start Page of TOSHIBA Media Player. Click a video file to playback. The steps for playing a music file on a local library: Click My Local Library on the Start Page of TOSHIBA Media Player.
Follow the instructions displayed on screen in the message. TOSHIBA Setup Utility TOSHIBA Setup Utility is a BIOS setup utility that provides you a menu- based user interface so that you can easily view and change BIOS settings.
If TOSHIBA Keyboard Dock is connected, the BIOS setup utility can also be launched through the keyboard operation. Save your work. In the Settings charm, click Power and then select Restart. Hold down the F2 key and then release this key one second after the computer is power on.
Page 95
Be sure to connect the AC adaptor when you create Recovery Media. Be sure to close all other software programs except the Recovery Media Creator. Do not run software such as screen savers which can put a heavy load on the CPU. Operate the computer at full power.
Please make sure to use the default Boot Mode option in the BIOS setup utility before restoring. 1. Launch the BIOS setup utility. Please refer to TOSHIBA Setup Utility section for further information. In the BIOS setup screen, select Advanced -> System Configuration -> Boot Mode -> UEFI Boot (Default).
If you have not created "Recovery Media", please contact TOSHIBA support for assistance. Restoring the pre-installed software from the Recovery Solid State Drive A portion of the total Solid State Drive space is configured as a hidden recovery partition. This partition stores files which can be used to restore pre-installed software in the event of a problem.
Page 98
* Please note that this service is not free-of-charge. Visit https://backupmedia.toshiba.eu on the Internet. Follow the on-screen instructions. You will receive your Recovery Discs within two weeks after placing your order. User's Manual 5-17...
In reality many problems can be solved simply, but a few may require help from TOSHIBA Support - if you find you need to consult others, be prepared to describe the problem in as much detail as possible.
Always try to make detailed notes of your observations and keep them in a permanent error log - this will help you to describe your problems to TOSHIBA Support. In addition, if a problem recurs, the log you have made will help to identify the problem faster.
Before using a peripheral device or application software that is not an authorized TOSHIBA part or product, make sure the device or software can be used with your computer. Use of incompatible devices may cause injury or may damage your computer.
If the indicator is glowing, the computer is on. Also, try turning the computer off and then on. If you are using an AC adaptor, verify that the computer is receiving power from the external power source by looking at the Battery indicator. If the indicator is glowing, the computer is connected to a live external power source.
If the computer has reached room temperature and it still does not start, or if it starts but shuts down quickly, contact TOSHIBA Support. AC power If you have trouble turning on the computer with the AC adaptor connected you should check the status of the DC IN/Battery indicator.
BIOS setup utility by using the following steps: Launch the BIOS setup utility. Please refer to TOSHIBA Setup Utility section for further information. Set the date in the System Date field. Set the time in the System Time field.
(remapping involves changing or reassigning the function of each key). If you are still unable to use the keyboard, you should contact TOSHIBA Support. Internal display panel Apparent computer's display panel problems may be related to the computer's setup and configuration - please refer to the...
As a last resort you should reformat the Solid State Drive and then reload the operating system and all other files and data. If you are still unable to resolve the problem, contact TOSHIBA Support. Memory Media Card For further information, please refer to Operating Basics.
Touch pad is either To access it, click Desktop -> Desktop Assist -> too sensitive or not Control Panel -> Hardware and Sound -> sensitive enough. Mouse. If you are still unable to resolve the problem, contact TOSHIBA Support. User's Manual...
If you are still unable to resolve the problem, contact TOSHIBA Support. USB device In addition to the information in this section, please also refer to the documentation supplied with your USB device.
Volume cannot be adjusted during Windows start up or shut down. If you are still unable to resolve the problem, contact TOSHIBA Support. External monitor Please also refer to Operating Basics, and to the documentation supplied with your monitor for further information.
Display error occurs Check that the cable connecting the external monitor to the computer is firmly attached. If you are still unable to resolve the problem, contact TOSHIBA Support. Wireless LAN Problem Procedure Cannot access...
TOSHIBA Support. TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience may be related to software or the operating system so it is important that you investigate other sources of assistance first.
Chapter 7 Appendix Specifications This section summarizes the computer’s technical specifications. Physical Dimensions Physical Dimensions shown below do not include parts that extend beyond the main body. The physical dimensions may vary depending on the model you purchased. Size 299 (w) x 189 (d) x 12.4 (h) millimeters (Computer only) (not including parts that extend beyond the main body).
AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Wire size: Minimum 0.75 mm...
United Kingdom UL approved BS approved Australia Europe AS approved Approved by the appropriate agency Canada China CSA approved CCC approved Information for Wireless Devices Wireless Technology Interoperability The Wireless LAN is compatible with other LAN systems Direct Sequence Spread Spectrum (DSSS) /Orthogonal Frequency Division Multiplexing (OFDM) radio technology, and is compliant to: The IEEE 802.11 Standard on Wireless LANs (Revision a/b/g/n or b/g/ n), as defined and approved by the Institute of Electrical and...
If you should experience any such problem, immediately turn off either one of your Bluetooth or Wireless LAN. Please visit http://www.pc.support.global.toshiba.com, if you have any questions about using Wireless LAN or Bluetooth Card from TOSHIBA. In Europe visit http://www.toshiba-europe.com/computers/tnt/bluetooth.htm Wireless Devices and your health Wireless products, like other radio devices, emit radio frequency electromagnetic energy.
TOSHIBA is not liable for the loss of data due to eavesdropping or illegal access through the wireless LAN and the damage thereof. Card Specifications...
Radio Frequency Band 5GHz (5150-5850 MHz) (Revision a and n) Band 2.4GHz (2400-2483.5 MHz) (Revision b/g and n) The range of the wireless signal is related to the transmit rate of the wireless communication. Communications at lower transmit range may travel larger distances.
Radio Regulatory Information The Wireless device is must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. This product complies with the following radio frequency and safety standards. Europe Restrictions for Use of 2400.0-2483.5MHz Frequencies in Europe France:...
Page 119
Russian Limited e.i.r.p 100mW. Permitted to use Federation: only for indoor applications, closed industrial and warehouse areas, and on board aircraft. Permitted to use for local networks of aircraft crew service communications on board aircraft in area of the airport and at all stages of flight.
Page 120
check the current channel of operation. If operation is occurring outside of the allowable frequencies for outdoor use, as listed above, the user must contact the applicable national spectrum regulator to request a license for outdoor operation. Canada - Industry Canada (IC) This device complies with RSS-210 of the Industry Canada Rules.
Page 121
If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. Contact an authorized TOSHIBA service provider if you have problems with interference caused by this product to Other Radio Stations.
(1)(2) (3)(4) 2.4 : This equipment uses a frequency of 2.4GHz. DS : This equipment uses DS-SS modulation. OF : This equipment uses OFDM modulation. 4 : The interference range of this equipment is less than 40m. : This equipment uses a frequency bandwidth from 2,400MHz to 2,483.5MHz.
Radio approvals for wireless devices This equipment is approved to the radio standard by the countries/regions in the following table. If you use this equipment in the countries/regions which are not listed in the table blow, please contact TOSHIBA Support. Austria Belgium Bulgaria...
For optimum performance, use your computer product only under recommended conditions. Read additional restrictions in your product documentation. Contact TOSHIBA technical service and support, refer to TOSHIBA support section for more information.
Published battery life numbers are achieved on select models and configurations tested by TOSHIBA at the time of publication. Recharge time varies depending on usage. Battery may not charge while computer is consuming full power.
Total Available Graphics Memory is the total of, as applicable, Dedicated Video Memory, System Video Memory and Shared System Memory. Shared System Memory will vary depending on system memory size and other factors. Wireless LAN The transmission speed over the wireless LAN and the distance over which wireless LAN can reach may vary depending on surrounding electromagnetic environment, obstacles, access point design and configuration, and client design and software/hardware configurations.
Page 127
DVD-R DL: Digital Versatile Disc Recordable Dual Layer DVD-ROM: Digital Versatile Disc-read Only Memory DVD-RW: Digital Versatile Disc-rewritable DVD+R DL: Digital Versatile Disc Recordable Double Layer FAT: File Allocation Table FCC: Federal Communications Commission gigabyte GBps: gigabytes per second HDD: Hard Disk Drive HDMI: High-definition Multimedia Interface...
Page 128
Secure Digital SDHC: Secure Digital High Capacity SDRAM: Synchronous Dynamic Random Access Memory SSD: Solid State Drive TFT: Thin-film Transistor URL: Uniform Resource Locator USB: Universal Serial Bus UXGA: Ultra Extended Graphics Array VGA: Video Graphics Array WAN: Wide Area Network WSXGA: Wide Super Extended Graphics Array WSXGA+:...
Index Dual Pointing Device Touch Pad 6-9 AC adaptor additional 4-30 connecting 2-5 DC IN 19V jack 3-5, 3-9 Equipment checklist 2-1 External monitor ASCII characters 4-14 problems 6-12 Battery extending life 4-18 Hard disk drive monitoring capacity 4-17 automatic power off 5-5 real time clock 3-12, 4-15 save mode 5-5 types 4-15...
Page 130
Overheating power down 6-5 Memory media slot 4-22 Power 6-5 Real Time Clock 6-6 Moving the computer 1-15 Sound system 6-11 TOSHIBA support 6-13 MultiMediaCard Touch Pad 6-9 removing 4-25 USB device 6-10 USB mouse 6-10 Password power on 5-5...
Page 131
4-23 Sleep Mode setting 2-10 System automatic 5-5 Sound system problems 6-11 TOSHIBA Desktop Assist 5-1 TOSHIBA Display Utility 5-2 USB device problems 6-10 Video mode 4-33 Video RAM 3-12 Web Camera 3-3 Wireless communication 7-4 User's Manual Index-3...