Cisco 1240 Hardware Installation Manual page 79
Connected grid router
Hide thumbs
Also See for 1240:
- Configuration manual (40 pages) ,
- Design and deployment manual (184 pages) ,
- Hardware installation manual (90 pages)
Table of Contents
Advertisement
Chapter 5
Mounting the Router
Mount the router according to the instructions in the
•
Insert one bolt assembly (
Step 5
corresponding bracket mount hole on the mounting plate.
Repeat
Step 6
Position the mounting bracket onto the mounting plate as needed before further tightening the bolts.
Step 7
Use a socket wrench to evenly tighten all four bolts and the serrated nut to finish installing the bracket
Step 8
on the plate. Use a torque of 6-7 foot-pounds when tightening the bolts and nut.
Figure 5-12
1
2
3
OL-26223-04
) through one of the pivot grooves (
3
Step 5
for the remaining bolt assemblies.
Mounting Bracket Attached to Mounting Plate
"Router Orientation" section on page
) on the bracket and then through the
2
Cisco 1240 Connected Grid Router Hardware Installation Guide
Mounting Instructions
5-7.
4
5
6
5-15
Advertisement
Table of Contents
