Transporting The Router - Cisco 1240 Hardware Installation Manual
Connected grid router
Hide thumbs
Also See for 1240:
- Configuration manual (40 pages) ,
- Design and deployment manual (184 pages) ,
- Hardware installation manual (90 pages)
Table of Contents
Advertisement
Chapter 8
Unmounting the Router
Remove 3 of the 4 bolts that attach the mounting bracket to the router. Do not remove the hinge bolt,
Step 8
which is the fourth bolt. Remove the equivalent bolts on the opposite side of the router.
Figure 8-2
Loosen hinge bolts two complete turns (do not loosen so that the bolts are removed from chassis).
Step 9
Step 10
Remove the router from the bracket.
Transporting the Router
This section includes instructions on transporting the router after it has been unmounted.
Disconnect lightning arrestors that might be installed on the router.
Step 1
Verify that all open chassis ports are sealed with the cable port seal plugs shipped with the router.
Step 2
OL-26223-04
Removing Bolts from Security Bracket
Cisco 1240 Connected Grid Router Hardware Installation Guide
Transporting the Router
8-3
Advertisement
Table of Contents
