hit counter script
Download
Share
Print this page
Epson PowerLite 8350 Replacement Manual
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. Projector
  5. PowerLite Home Cinema 8350
  6. Replacement manual

Epson PowerLite 8350 Replacement Manual

Replace the air filter and the lamp
Hide thumbs Also See for PowerLite 8350:
1
2
3

Advertisement

Quick Links

Download this manual See also: User Manual
Epson PowerLite 8350 / 8700 UB
WARNING: Before you clean any part of the projector, turn it off and unplug the power cord.
Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical
voltages in the projector can injure you severely. Do not try to service this product yourself,
except as specifically explained in this User's Guide.
The only parts you should replace are the air filter and the lamp. If another part needs
replacing, contact your dealer or a qualified servicer.

Replacing the Lamp

The projection lamp lasts for up to 4000 hours. You can use the
long it's been in use (see page 56). It's time to replace the lamp when:
The projected image gets darker or starts to deteriorate.
The projector's lamp light flashes red at half-second
intervals.
The message
when you start projecting.
Note: Lamp life results will vary depending on mode selected,
environmental conditions, and usage.
Turn off this product when not in use to prolong the life of the projector.
You can purchase lamp part number V13H010L49 from an authorized Epson reseller. To
find the nearest reseller, please call 800-GO-EPSON (800-463-7766). To purchase online,
visit www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).
Be sure to read the "Important Safety Information" on page 71 before replacing the lamp.
WARNING: Let the lamp cool fully (about 1 hour) before replacing it. In the unlikely event that the
lamp has broken, small glass fragments may be present and should be removed carefully to avoid
injury.
Caution: Never touch the glass portion of the lamp with your bare hands; the invisible residue left
by the oil on your hands may shorten the lamp life. Use a cloth or glove to handle the new lamp.
Follow these steps to replace the lamp:
1. If the projector is on, press the P power button and wait for the light to stop flashing.
2. Turn off the power switch on the back of the projector.
3. Unplug the power cord and any cables.
4. Wait about an hour to make sure the lamp is no longer hot.
Replace the lamp
appears on the screen
INSTALLATION HANDBOOK
Info
menu to check how
Lamp
light
Maintenance
1

Advertisement

loading

Related Manuals for Epson PowerLite 8350

Summary of Contents for Epson PowerLite 8350

  • Page 1: Replacing The Lamp

    Turn off this product when not in use to prolong the life of the projector. You can purchase lamp part number V13H010L49 from an authorized Epson reseller. To find the nearest reseller, please call 800-GO-EPSON (800-463-7766). To purchase online, visit www.epsonstore.com (U.S.
  • Page 2 INSTALLATION HANDBOOK Epson PowerLite 8350 / 8700 UB Maintenance 5. Insert the screwdriver that came with the lamp (or a similar tool) into the slot on the back of the projector to release the lamp cover. Then lift up the cover to remove it.

  • Page 3: Resetting The Lamp Usage Timer

    INSTALLATION HANDBOOK Epson PowerLite 8350 / 8700 UB Maintenance 8. Gently insert the new lamp and tighten its screws. Caution: Don’t touch the glass portion of the lamp assembly. Touching the glass could result in premature lamp failure. 9. Replace the lamp cover. (The projector won’t work if the lamp cover is open or loose.) 10.

This manual is also suitable for:

Powerlite 8700 ub