Acer ALTOS R910 Series User Manual page 146
Hide thumbs
Also See for ALTOS R910 Series:
- User manual (210 pages) ,
- Installation & configuration manual (74 pages)
Table of Contents
Advertisement
136
•
Make sure you are using the correct and the current drivers.
•
Make sure the driver is loaded and the protocls are bound.
No video but LED on the front panel indicates system is in reset mode
•
Make sure the VRMs are plugged in and the pins are not bent.
•
Replace the failed VRM.
Problems with the network
Network status indicator does not light.
Do the following:
•
Check the cabling and network equipment to make sure that all
cables are properly connected.
•
Reinstall the network drivers.
•
Try another port or hub on the switch.
Diagnostics pass but the connection fails.
•
Make sure the network cable is securely attached.
•
Make sure you specify the correct frame type in the NET.CFG file.
The controller stopped working when an adapter was installed.
•
Make sure the cable is connected to the port from the onboard
network controller.
•
Make sure the other adapter supports shared interrupts and your
OS supports shared interrupts.
•
Try reseating the adapter.
The adapter stopped working without apparent cause.
•
Try reseating the adapter first, then try a different slot if necessary.
5 Troubleshooting
Advertisement
Table of Contents
Troubleshooting
