Chapter 3
Administration > Log
The Router can keep logs of all traffic for your Internet
connection .
Administration > Log
Log
Log
To disable the Log function, keep the default setting,
Disable . To monitor traffic between the network and the
Internet, select Enable .
When you wish to view the logs, click Incoming Log or
Outgoing Log, depending on which you wish to view .
Click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes .
Administration > Diagnostics
The diagnostic tests (Ping and Traceroute) allow you to
check the connections of your network components .
Administration > Diagnostics
Ping Test
Ping
The Ping test checks the status of a connection .
Click Ping to open the Ping Test screen . Enter the address
of the PC whose connection you wish to test and how
many times you wish to test it . Then, click Ping . The Ping
Test screen will show if the test was successful . To stop the
test, click Stop . Click Clear Log to clear the screen . Click
Close to return to the Diagnostics screen .
Wireless-G Broadband Router
Advanced Configuration
The Ping Test
Traceroute Test
Traceroute
To test the performance of a connection,
click Traceroute to open the Traceroute Test screen . Enter
the address of the PC whose connection you wish to test
and click Traceroute . The Traceroute Test screen will show
if the test was successful . To stop the test, click Stop . Click
Clear Log to clear the screen . Click Close to return to the
Diagnostics screen .
The Traceroute Test
Administration > Factory Defaults
The Administration > Factory Defaults screen allows you
to restore the Router's configuration to its factory default
settings .
Factory Defaults
Restore Factory Defaults
to the default values, select Yes, and then click Save
Settings . Any settings you have saved will be lost when
the default settings are restored .
Administration > Factory Defaults
To reset the Router's settings
19