Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AEG LAVAMAT REGINA 2552F
Summary of Contents for AEG LAVAMAT REGINA 2552F
- Page 1 LAVAMAT REGINA 2552F Washing machine User information...
- Page 2 Dear customer, Please read this User Information carefully and keep it to refer to at a later date. Pass this User Information on to any subsequent owner of the appli- ance. The following symbols are used in the text: Safety instructions Warning: Notes that concern your personal safety.
-
Page 3: Table Of Contents
Contents Operating Instructions ........Safety . - Page 4 What to do if........... . 28 Remedying small malfunctions yourself .
-
Page 5: Operating Instructions
Operating Instructions Safety Prior to using for the first time • Follow the ”Instructions for installation and connection”. • If the appliance is delivered in the winter months when there are mi- nus temperatures: Store the washing machine at room temperature for 24 hours before using for the first time. -
Page 6: General Safety
General safety • Repairs to the washing machine must only be carried out by qualified service engineers. • Never use the washing machine if the mains cable is damaged; or if the control panel, work top or plinth area is damaged such that the inside of the appliance is freely accessible. -
Page 7: Description Of The Appliance
Description of the appliance Detergent dispenser Control panel drawer Rating plate (behind door) Three screw feet (height adjustable); Plinth flap/ rear left: Drain pump Automatic foot Control panel Programme knob and Display On/Off dial Function keys START/PAUSE key What is shown in the display Information field, shows the current settings 12.45 COTTON... -
Page 8: Program Overview
Program overview Options Times Spin speed Program ENERGY SAVING • • • • • • • • • COTTONS • • • • • • • • • • • LINEN/EASY-CARES • • • • • • • • • •... - Page 9 Care Use/Features symbols Energy-saving program at 60 °C for lightly to normally soiled whites/coloureds made of cotton/linen. Program at 95 °C for normally to heavily soiled whites/coloureds made of cotton/lin- General program for whites/coloureds made of cotton/linen as well as for easy-care I K N mixed fibres and synthetics.
-
Page 10: Overview Of Terms
Overview of terms The English terms used in this User Information booklet correspond to the German/French names below that are to be found at your appli- ance’s control panel. Programme selector Buttons AUS/ARRET TEMP. TEMP.C° KOCHWÄSCHE/ U/MIN. COTTONS BLANC T/MIN. BUNTWÄSCHE/ OPTION OPTION... -
Page 11: Prior To Using For The First Time
Prior to using for the first time Switching on the appliance for the first time - setting the language The display is set to German as standard in the factory. Important: If the display does not show the menu for setting the lan- guage when the appliance is switched on, the appliance has been switched on before. -
Page 12: Setting The Time
Setting the time So that the time and the end of the program are correctly displayed, please check the display and set the current time if necessary. To do this, please see the section “Setup/Clock”. Carrying out a wash program prior to first use In order to remove any residues from the drum and water container which may have been left during manufacturing, perform the first wash cycle without any washing in the machine. -
Page 13: Running A Washing Cycle
Running a washing cycle Opening the door/loading washing 1. To open the door: pull the door by the handle. 2. Unfold washing and load it loosely into the machine. Mix large and small items. Important: Do not get any washing caught between the door and the rubber seal. -
Page 14: Switching On The Appliance/Selecting A Program
1. Pull the detergent dispenser drawer out as far as the stop. 2. Add the detergent/additives. 3. Push the drawer in fully. In-wash stain treatment/ Washing powder/tablets tablets for the main wash Washing powder/tablets Softeners/ for the pre-wash wash-care products or for water softener to preserve the shape of garments/... -
Page 15: Changing The Temperature
– The lighting for the display switches itself off at the end of the cycle or, if the appliance is not started after the program is set, after 10 minutes. To switch the light on again, press any key or turn the program knob. -
Page 16: Setting Options
Setting options Options can be added to a wash cycle that has already been selected. Press the OPTION key. The display shows the symbols for the options. PREWASH Pre-washes at about 30 °C before the main wash cycle, which follows automatically. SENSITIVE Enhanced rinse action through an additional rinse cycle togeth- er with decreased drum movement (improved fabric care). -
Page 17: Prewash, Sensitive, Stain, Night Cycle
Prewash, Sensitive, Stain, Night Cycle 1. Press the OPTION key repeat- 12.45 LINEN/EASY CARE edly until the desired sym- 14.37 Prewashing bol flashes, e. g., aýýýýýVýSýFýLýBýaýaýaýa PREWASH (With each press of the key, the next TEMP. C° U/MIN. OPTION ZEIT TEMP. -
Page 18: Setting Times
Setting times Shortened cycles and the delay of the start time can be set for a wash cycle that has already been selected. Press the TIME key. The display shows the symbols for TIME SAVING and DELAY START. TIME SAVING: SHORT or VERY SHORT Shortened wash cycle for lightly soiled washing. -
Page 19: Delay Start
Delay Start 1. Press the TIME key repeatedly, until the DELAY START symbol flashes. 2. Press the OK key. In the display, “Start in 0 min” is displayed. 3. Press the TIME key repeated- 12.45 Delay Start ly, until the display shows 18.37 Start in 4h the desired period by which... -
Page 20: Program Progress
Program progress The display indicates the 12.45 LINEN/EASY CARE stage of the program that is 14.37 Washing currently being performed as 50C 800 aýýýýýaýaýaýaýaýaýaýaýa well as the time of the end of the program. TEMP. C° U/MIN. OPTION ZEIT TEMP. C° T/MIN. -
Page 21: Setup
3. After the wash, pull out the detergent dispenser drawer slightly to al- low it to dry. Leave the door slightly open to air the inside of the wash- ing machine. If RINSE HOLD or NIGHT CYCLE was selected: After a RINSE HOLD or when a program with NIGHT CYCLE has ended, the START/PAUSE indicator flashes. - Page 22 4. Using the OPTION key set PREWASH and press the OK key. A black bar appears under the PREWASH symbol 5. Press the OPTION key repeatedly, until the SETUP symbol flashes. 6. Press the OK key. The display Memory 1 changes to the Special Func- Store program tions level.
-
Page 23: Volume
Volume The volume of the acoustic signal can be selected. 1. Turn the program knob to any program and press the OPTION key re- peatedly until the SETUP symbol flashes. 2. Press the OK key. 3. Press the OPTION key repeatedly, until VOLUME is shown in the display. 4. -
Page 24: Language
Language 1. Turn the program knob to any program and press the OPTION key repeatedly until the SETUP symbol flashes. 2. Press the OK key. 3. Press the OPTION key repeatedly, until the display shows LANGUAGE. 4. Press the OK key. 5. -
Page 25: Contrast And Brightness
Contrast and brightness 1. Turn the program knob to any program and press the OPTION key re- peatedly until the SETUP symbol flashes. 2. Press the OK key. 3. Press the OPTION key repeatedly, until the display shows CONTRAST or or BRIGHTNESS. -
Page 26: Child Safety Device
Child safety device When the child safety device is set, the door can no longer be closed. Setting the child safety device: Use a coin to turn the knob (on the inside of the door) in a clockwise di- rection as far as it will go. Warning! The knob must not be sunk-in after being set, otherwise the child safety device is not active. -
Page 27: Cleaning And Maintenance
Cleaning and maintenance Important! Do not use furniture care products or aggressive cleaners to clean the appliance. Wipe control panel and body with a damp cloth. Cleaning procedure If you plan to wash mainly at low temperature, you should run a hot programme from time to time. -
Page 28: What To Do If
Door and rubber collar Regularly check whether deposits or foreign bodies are present in the folds of the rubber collar or on the inside of the glass door. Clean the glass in the door and the rubber collar regularly. What to do if... Remedying small malfunctions yourself If while the appliance is operating a short acoustic signal sounds 3 times and one of the following messages appears in the display:... - Page 29 Problem Possible cause Remedy Tap turned off. Turn the tap on. Filter in the screw con- Turn off the water tap. Un- Display shows: “No inco- nection of the inlet hose screw hose, take out filter ming water/Check tap & is blocked.
- Page 30 Problem Possible cause Remedy Kink in drain hose. Remove kink. Maximum pumping Please contact Customer Care height of 1m exceeded. Department. Switch off appliance. Pull out Display shows: mains plug. – “No drain - check drain Drain pump is blocked. Clean drain pump.
-
Page 31: If The Wash Results Are Not Satisfactory
If the wash results are not satisfactory Washing is grey and scale is being deposited in the drum • Too little detergent is being used. • The right detergent was not used. • Special soiling was not pre-treated. • Programme or temperature was not correctly set. There are grey stains on the washing. -
Page 32: Carrying Out An Emergency Drain
Carrying out an emergency drain Warning! Before emergency draining, switch off the washing machine and remove the mains plug from the socket. Warning! The water that comes out of the emergency drain hose may be hot. There is a risk of scalding. Let the water cool before performing an emergency drain. -
Page 33: Drain Pump
Drain pump The drain pump is maintenance-free. It is only necessary to open the pump cover if there is a malfunction and water is no longer being pumped out, e. g. if the pump wheel is blocked. Please make sure before loading the washing that there are no foreign bodies in the pockets or caught between the washing. -
Page 34: Disposal
Disposal Packaging material The packaging materials are environmentally friendly and can be recy- cled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging materials in the appropriate container at the community waste disposal facilities. Old appliance The symbol on the product or on its packaging indicates that this... -
Page 35: Technical Data
Technical data This appliance conforms with the following EU Directives: – 73/23/EEC dated 19.02.1973 Low Voltage Directive – 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending Directive 92/31/EEC – 93/68/EEC dated 22.07.1993 CE Marking Directive Height x Width x Depth 850 x 598 x 640 mm Depth when door is open 1017 mm... -
Page 36: Installation And Connection Instructions
Installation and connection instructions Safety information for the installation • This washing machine cannot be built-in. • Before using for the first time, check the appliance for damage sus- tained while it was being transported. Do not under any circumstanc- es connect an appliance that is damaged. -
Page 37: Installing The Appliance
Installing the appliance Transporting the appliance Warning! The washing machine is very heavy. Risk of injury. Be careful when lifting. • Do not lay the appliance on its front nor on its right side (as seen from the front). Electrical components may get wet. •... - Page 38 3. Remove both plastic caps sideways. Special spanner A and sealing caps B (2 off) and C (1 off) are supplied with the appliance. 4. Remove screw D with its compres- sion spring using special spanner A. 5. Turn sealing cap C upside down as shown in the illustration.
-
Page 39: Where To Install
Where to install Important! The appliance must not be used in a room where there is a danger of frost. Frost damage or impaired operation! Frost damage is not covered by the warranty. • The surface on which the appliance is to be installed must be firm and level. -
Page 40: Making The Appliance Level
Making the appliance level Automatic foot: The rear foot on the left-hand side of your washing machine is built as a shock absorbing foot, which is why the appliance gives in the back left-hand corner if put under load. The automatic foot guarantees that the appliance does not move even at high spin speeds. -
Page 41: Connecting To The Water Supply
Connecting to the water supply Important! • This appliance must not be connected to the hot water system. • When connecting it, use only new hose kits. • Only connect the appliance to the drinking water supply. Rain water or water for industrial use may only be used if it fulfils the require- ments of DIN1986 and DIN1988. -
Page 42: Water Drainage
Important! Do not position the inlet hose vertically downwards. Position it to the right or the left as shown in the illustration. 2. Connect the hose with the straight connector to a water tap with an R ¾ (inch) screw thread. 3. - Page 43 Draining water into a wash basin/bath Important! – Small basins are not suitable. Wa- ter may overflow. – The end of the drain hose must not be in the water that has been pumped out. Otherwise water could be sucked back into the ap- pliance.
-
Page 44: Guarantee/Customer Service
Guarantee/Customer Service Servicestellen Points de Service Servizio dopo vendita 5506 Mägenwil/Zürich 1028 Préverenges 6916 Grancia Industriestrasse 10 Le Trési 6 Zona Industriale E 9000 St. Gallen Vonwilstrasse 15 4127 Birsfelden Hauptstrasse 52 8604 Volketswil Hölzliwisenstrasse 12 6032 Emmen Buholzstrasse 7000 Chur Comercialstrasse 19 3063 Ittigen/Bern Ey 5... - Page 45 www.electrolux.com Albania +35 5 4 261 450 Rr. Pjeter Bogdani Nr. 7 Tirane Belgique/België/ +32 2 363 04 44 Bergensesteenweg 719, 1502 Lembeek Belgien Èeská republika +420 2 61 12 61 12 Budìjovická 3, Praha 4, 140 21 Danmark +45 70 11 74 00 Sjællandsgade 2, 7000 Fredericia Deutschland +49 180 32 26 622...
- Page 46 Electrolux Ljubljana, d.o.o. Slovenija +38 61 24 25 731 Tržaška 132, 1000 Ljubljana Electrolux Slovakia s.r.o., Electrolux Slovensko +421 2 43 33 43 22 Domáce spotrebièe SK, Seberíniho 1, 821 03 Bratislava Suomi +35 8 26 22 33 00 Konepajanranta 4, 28100 Pori Electrolux Service, S:t Göransgatan 143, Sverige +46 (0)771 76 76 76...
-
Page 47: Service
Service In the event of technical faults, please first check whether you can remedy the problem yourself with the help of the operating instruc- tions (section “What to do if…”). If you were not able to remedy the problem yourself, please contact the Customer Care Department or one of our service partners. - Page 48 105 176 869-00-161006-04 Subject to change without notice...