Welcome to Toshiba About the use • Make sure to insert the plugs firmly, when • Thank you for purchasing this Toshiba LCD plugging the AC power cord into the TV set Colour TV. This manual will help you use the end and wall outlet end.
Introduction / Getting started • Never use other cord except for supplied The inside of this TV will overheat if the AC power cord, and never use the supplied ventilation holes are covered, blocked or power cord for any other purpose. sealed, which may result in a fire.
Page 4
Introduction / Getting started • To prevent injury, use the exclusive optional stand or wall-hanging bracket to install this TV on the floor or wall securely in accordance with a qualified technician. Side view Top view Sturdy tie 2) The apparatus shall not be exposed to (as short as possible) dripping or splashing and that no objects filled with liquids, such as vases, shall be...
Page 5
Introduction / Getting started Service 5) When the TV will not be used for a long period of time, such as during vacation or 1) Never repair, modify or disassemble the TV travel, remove the power plug from the wall by yourself.
• If you have the LCD screen facing to the owner’s manual. sun, the LCD screen will be damaged. Be • Toshiba is not liable for any damage caused by aware of locating the TV close to a window misuse or malfunction through simultaneous or outdoors.
• Never mix battery types or combine used depend upon your particular area. batteries with new ones. Your Toshiba dealer or service personnel can Notes: best advise you on which aerial to use in your • If the remote control does not operate correctly, area.
Introduction / Getting started TV front view TV back panel connections TV back view Point the brightness sensor (- page 18). Cable holder Power cord Right side view HDMI1 ( AUDIO ) COMPONENT VIDEO INPUT AUDIO /MONO AUDIO /MONO VIDEO RGB/PC AUDIO FIXED...
Introduction / Getting started 10 o PC/HDMI1 (AUDIO) (input terminal) — 18 To return to the previous menu (- page 12) PC audio input terminal is shared with HDMI1 19 MENU (- page 11) analogue audio input terminal, and their use 20 Teletext control buttons (Four coloured can be configured in the SETUP menu (- buttons : Red, Green, Yellow, Blue)
Introduction / Getting started Turning the TV on Press v or w to select the menu language (English, Chinese (CS), Malay, Thai, Vietnamese, Russian, Arabic, Persian or Switching on the TV French). Connect the power cord to a wall outlet, the Press Q, to display the Location menu (- ! power indicator lights in red (standby mode).
Introduction / Getting started Displaying the menu chart Manual Tuning Pos. Label PICTURE PICTURE Picture Settings 3D Colour Management Base Colour Adjustment Active Backlight Control Auto Brightness Sensor Noise Reduction Noise Reduction Closing the Quick Setup menu, press EXIT. Note: The Quick Setup menu can also be display at SOUND any time from the SETUP menu.
Introduction / Getting started Notes: Select the second position with the Number • In the video input mode (o1, o2 and HDMI), buttons (0-9). Auto Tuning and Manual Tuning are not available. Instead, Manual Settings appears in Press . The previous channel will be the SETUP menu (- page 20).
Introduction / Getting started D. Position skip selection Press Q to display the Auto Tuning menu. Press s or r to turn the position skip option on “8” or off “(”. Auto Tuning The position will then be skipped when you Previous settings will be Lost! Press EXIT for no change.
Introduction / Getting started Sorting positions • The TV is capable of receiving a number of different channels depending upon where you live. • Sorting programme position is an easy way of storing each channel on the programme position of your choice. Ex.: To swap channel ABCD (Prog.1) for channel MNOP (Prog.4): From the SETUP menu, press s or r to...
Using the TV’s features Cinema Picture adjustment When watching “all sides panel format” films/ video tapes, this setting will eliminate or reduce • Most of the picture controls and functions are the black bars on all the sides of the screen available.
Using the TV’s features From the SETUP menu, press s or r to select Picture Position. Press Q, then press s or r to select the item you want to adjust. Dot by Dot Picture Position “Dot by Dot” is a non-scaling display. Depending Horizontal Position Vertical Position on the input signal format, the picture is...
Page 17
Using the TV’s features Note: Picture Settings When a DVD movie with subtitle is playing back, Picture Mode Dynamic this mode may not work correctly. Backlight Contrast Adjusting the Colour Temperature Brightness Colour Tint Colour Temperature increases the warmth or Sharpness coolness of the picture by setting the red, green Black/White Level...
Using the TV’s features Adjusting the Colour Management Press v or w to select On or Off. You can adjust the picture colour quality by selecting from 6 base colour adjustments : Red, Sound adjustment Green, Blue, Yellow, Magenta or Cyan. From the PICTURE menu, press s or r to Setting the MTS (Multi-channel TV Sound) select 3D Colour Management.
Using the TV’s features Using the Advanced Sound Settings Bass Boost helps to create rich bass. Stereo Voice Enhancement helps to emphasize dialogue. It will be easier to hear voices over Selecting the bilingual programmes other background audio. From the SOUND menu, press s or r to When a bilingual programme is received, select Advanced Sound Settings, and then j Dual appears.
Using the TV’s features If the standby button is pressed, the TV will When setting the On timer, press s or r to switch off and can only be brought out of standby select the On Timer Position and enter the by using the remote control.
Using the TV’s features A. Colour System • Language 2: Polish, German, Dutch, Confirm that Colour System is set to “A” Flemish, Estonian, Lettish, Lithuanian, (Auto). If not, select “A” with s or r. French, Serbian, Croatian, Slovenian, Czech, Slovak, Rumanian Note: •...
Page 22
For further information on your particular text jokes. To discover the solutions, press system(s), see the broadcast teletext index page or consult your local Toshiba dealer. To hold a wanted page: This function is included as it is part of the...
Using the TV’s features Note: Notes: It will not be possible to change programme • When the input signal is in 1080i, 1080p and the picture size select the Native mode (- position while in Teletext mode, you will have page 15), the picture size will be changed Wide to cancel the teletext first by pressing mode when using this function.
Connecting your TV Back connections • This TV is only operable with L-PCM on 32/44.1/48 kHz and 16/20/24 bits. If there is Connection example no sound when using HDMI, use the analogue audio cables to connect the TV and the HDMI device, and select Analogue in HDMI 1 Audio of the AV Connection menu.
Connecting your TV Connecting an HDMI device Standard analogue audio cables An HDMI-to-DVI adapter cable transfers only One HDMI cable (type A connector) video. Separate analogue audio cables are TV back view required. Selecting the PC/HDMI 1 Audio mode You can select PC audio or HDMI audio when using this function.
Connecting your TV Connecting a computer • Depending on the specification of the PC you are playing the DVD-Video on, and the DVD’s To connect a PC to the RGB/PC terminal on title, some scenes may be skipped, or you may the TV: not be able to pause during multi-angle scenes.
FAT12, FAT16 and FAT32 to select Clock Phase. You must obtain any required permission Press v or w to obtain a clear picture. from copyright owners to download or use copyrighted content. Toshiba cannot and does not grant such permission.
Page 28
Connecting your TV Basic operation Press Q to begin viewing the selected file or to move to the next layer. Auto Start: : To return to the previous layer. From the FUNCTION menu, highlight Media Press s to view the next file, or press r to Player and press Q.
Page 29
Connecting your TV To display file status information: Press . The following information will be displayed at the bottom of the screen. • File number/Total number of files (only for files stored in the same directory) • Photo title • Date and time taken •...
Reference section Troubleshooting Some pixels of the screen do not light Before calling a service technician, please check • The LCD display panel is manufactured the following table for a possible cause of the using an extremely high level of precision symptom and some solutions.