Page 2 © 2005 by TOSHIBA Corporation. All rights reserved. Under copyright law, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.
Page 3 Macrovision Corporation. Reverse engineering of disassembly is prohibited. EU Declaration of Conformity TOSHIBA declares, that the product: M50 Series conforms to the following Standards: This product is labelled with the CE Mark in accordance with the related...
Page 4 TOSHIBA M50 Series Modem warning notice Conformity Statement The equipment has been approved to [Commission Decision "CTR21"] for pan- European single terminal connection to the Public Switched Telephone Network (PSTN). However, due to differences between the individual PSTNs provided in...
Page 5: Safety Instructions
TOSHIBA M50 Series Safety Instructions Use the following safety guidelines to help protect yourself and your computer. When Using Your Computer Do not operate your portable computer for an extended period of time with the base resting directly on your body. With extended operation, heat can potentially build up in the base.
Page 6 To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord. Use only the battery pack that came with the computer or an optional battery pack. Use of the wrong battery could damage your computer. TOSHIBA assumes no liability for any damage in such case. User’s Manual...
Page 7 TOSHIBA M50 Series Optical Disc Drive Safety Instruction The optical disc drive employs a laser system. To ensure proper use of this product, please read the manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
Page 8: Important Notice
TOSHIBA M50 Series Manufacturer Type Panasonic DVD Super Multi UJ-841B Communications Co., LTD. TEAC DVD Super Multi DV-W28EA-6TT Hitachi LG Data Storage, DVD Super Multi GSA-4082N Inc. Pioneer DVD Super Multi DVR-K16TBT Important Notice Copyrighted works including, but not limited to music, video, computer program, databases are protected by copyright laws.
Page 9: General Precautions
TOSHIBA M50 Series General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the general precautions below and to note the cautions included in the text of the manual.
Page 10 For optimum performance, use your computer product only under recommended conditions. Read additional restrictions under “Environmental Conditions” in your product Resource Guide. Contact Toshiba Technical Service and Support for more information. User’s Manual...
Page 11: Main Memory Disclaimer
TOSHIBA M50 Series Graphics Processing Unit (“GPU”) Performance Disclaimer: The graphics processing unit ("GPU") performance may vary depending on product model, design configuration, applications, power management settings and features utilized. GPU performance is only optimized when operating in AC power mode and may decrease considerably when operating in battery power mode.
Page 12: Express Media Player
This product and the supplied accessories are designed to observe the related EMC (Electromagnetic Compatibility) and safety standards. However, TOSHIBA cannot guarantee that this product still observes these EMC standards if accessories or cables not manufactured / distributed by TOSHIBA are connected or implemented. To avoid in general EMC problems, the following advice should be observed: ■...
Page 13: Wireless Lan And Your Health
Any consequences resulting from the use of this product in working environments that are not approved or the use is restricted are not the responsibility of Toshiba Corporation. The consequences of the use of this product in those working environments may be: ■...
Page 14: Limitation Of Liability
TOSHIBA M50 Series Safety Instruction for Wireless Products If your computer has a wireless function, all safety instructions must be read carefully and must be fully understood, before you attempt to use it. This manual contains the safety instructions that must be observed in order to avoid potential hazards that could result in personal injuries or could damage your wireless products.
Page 15 TOSHIBA M50 Series Warning Turn OFF the Wireless Communication switch of wireless products in a congested place, such as a crowded commuter train. Keep this product away from a cardiac pacemaker at least 22cm. Radio waves can potentially affect cardiac pacemaker operation, thereby causing respiratory troubles.
Page 16: Table Of Contents
Equipment checklist........-xxii M50 Features Chapter 1 Features.
Page 17 DLA for TOSHIBA ........
Page 18 TOSHIBA support ........
Page 19: Preface
This manual tells how to set up and begin using your M50 series computer. It also provides detailed information on configuring your computer, basic operations and care, using optional devices and troubleshooting.
Page 20: Online Manual Contents
Chapter 6, Power and Power-Up Modes, gives details on the computer's power resources. Chapter 7, Setup, introduces you to the TOSHIBA Hardware Setup program. Chapter 8, Optional Devices, describes the optional hardware available. Chapter 9, Troubleshooting, provides helpful information on how to perform some diagnostic tests, and suggests courses of action if the computer doesn't seem to be working properly.
Page 21: Conventions
Preface Conventions This manual uses the following formats to describe, identify, and highlight terms and operating procedures. Abbreviations On first appearance, and whenever necessary for clarity, abbreviations are enclosed in parentheses following their definition. For example: Read Only Memory (ROM). Acronyms are also defined in the Glossary. Icons Icons identify ports, dials, and other parts of your computer.
Page 22: Equipment Checklist
* indicates an optional part that is dependant on the model purchased Check to make sure you have all the following items: Hardware ■ M50 Series Portable Personal Computer ■ Universal AC Adapter and Power Cord ■ USB Floppy Disk Drive * ■...
Page 23 Product Recovery ■ Additional Software CD * ■ Express Media Player Recovery CD * Documentation ■ Your computer's documentation: ■ M50 Series Personal Computer User's Manual ■ M50 Series Quickstart ■ Instructiion Manual for Safety and Comfort ® ® ■ Microsoft...
Page 24: Chapter 1 M50 Features
Basic features are described in a separate pamphlet. Some of the features described in this manual may not function properly if you use an operating system that was not preinstalled by TOSHIBA. Features The M50 Series computer uses TOSHIBA's advanced Large Scale...
Page 25 M50 Features Memory The graphics system in your computer may use part of the main system memory for graphics performance and therefore reduce the amount of system memory available for other computing activities. The amount of system memory allocated to support graphics may vary depending on the graphics system, applications utilized, system memory size and other factors.
Page 26 M50 Features Power Battery Pack 4-cell Lithium Ion smart battery pack with 14.4V*2000mAh capacity 6-cell Lithium Ion smart battery pack with 10.8V*4000mAh capacity 8-cell Lithium Ion smart battery pack with 14.4V*4300mAh capacity Approximately 12 hours or longer charging time to 100% battery capacity with system switched Approximately 4 hours charge time to 100% battery capacity with system switched off.
Page 27 M50 Features Disks Fixed hard disk Depending on the model purchased, one of the following drives will be installed: 40.0 billion bytes (37.26GB) 60.0 billion bytes (55.88GB) 80.0 billion bytes (74.52GB) 100.0 billion bytes (93.16GB) 120.0 billion bytes (111.78GB) Bus Master IDE 9.5m/m 2.5"...
Page 28 M50 Features ■ ■ DVD-ROM DVD-Video ■ ■ DVD-R DVD-RW ■ ■ DVD+R DVD+RW ■ ■ DVD-RAM DVD+R (double layer) ■ DVD-R (dual layer) ■ ■ CD-R CD-RW ■ ■ CD-DA CD-Text ■ Photo CD (single/multi-session) ■ CD-ROM Mode1, Mode2 ■...
Page 29: Security Lock Slot
M50 Features Headphone jack A standard 3.5mm stereo jack is provided for the connection of external headphones or speakers. Microphone jack A standard 3.5 mm mini microphone jack enables connection of monaural microphone input. Communications Modem An internal modem provides capability for data and fax communication.
Page 30: Special Features
M50 Features Special features The following features are either unique to TOSHIBA computers or are advanced features, which make the computer more convenient to use. Hotkeys Key combinations that let you quickly modify the system configuration directly from the keyboard without running a system configuration program.
Page 31 Hibernation system automatically enters Hibernation Mode and shuts itself down. You can specify the setting in the TOSHIBA Power Saver utility. Hibernation This feature lets you turn off the power without exiting from your software. The contents of main memory are saved to the hard disk.
Page 32: Utilities
If Control Panel is in Classic View: start Control Panel TOSHIBA Power Saver TOSHIBA Assist TOSHIBA Assist is a graphical user interface that provides easy access to help and and services. You can start the TOSHIBA Assist as follows: start All Programs...
Page 33 M50 Features TOSHIBA ConfigFree ConfigFree is a suite of utilities to allow easy control of communication devices and network connections. ConfigFree also allows you to find communication problems and create profiles for easy switching between location and communication networks. start All Programms...
Page 34 "F number" key. The Fn key remains active until another key is pressed. TOSHIBA Virtual TOSHIBA Virtual Sound works as an audio filter Sound using SRS WOW XT and SRS TruSurround XT functions provided by SRS Labs, Inc. in the United States.
Page 35: Options
The following options are available: Memory Modules Two memory module can be installed in this computer. Use only PC4200 compatible memory modules. See your TOSHIBA dealer for details Battery Pack An additional battery pack can be purchased from your TOSHIBA dealer.
Page 36: Chapter 2 The Grand Tour
Chapter 2 The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Certain types of notebook chassis are designed to accommodate all possible configurations for an entire product series. Your selected model may not have all the features and specifications corresponding to all of the icons or switches shown on the notebook chassis, unless you have selected all those features.
Page 37 The Grand Tour DC IN LED The DC IN LED indicates the computer is connected to the AC adapter and it is plugged into an AC power source. Power LED In normal operating mode, the Power LED is green. If the system is in Standby Mode the LED will flash amber, while the LED will be off when the computer is turned off or is in Hibernation Mode.
Page 38: Right Side
The Grand Tour Right side The following figure shows the computer's right side. PTICAL RIVE PTICAL RIVE The right side of the computer Optical Disc Drive The computer is configured with a full-size optical disc drive module that lets you run either 12 cm (4.72") or 8 cm (3.15") discs without using an adapter.
Page 39: Left Side
The Grand Tour Left side The following figure shows the computer's left side. RGB M ONITOR NIVERSAL ERIAL (USB) P ENTS CARD SLOT TV O The left side of the computer * The availability of this feature is dependant on the model you purchased. RGB (Monitor) Port This 15-pin port lets you connect an external video display to the computer.
Page 40: Back Side
The Grand Tour Back side The following figure shows the computer back panel. ODEM NIVERSAL ERIAL (USB) P ORTS ECURITY DC IN 19V J LAN J The back side of the computer Modem Jack In regions where an internal modem is installed as standard equipment, this jack lets you use a modular cable to connect the modem directly to a telephone line.
Page 41: Underside
The Grand Tour Underside The following figure shows the underside of the computer. Make sure the display is closed before turning over your computer. XPANSION EMORY OCKET ATTERY ATTERY ATCH ATTERY The bottom of the computer * The availability of this feature is dependant on the model you purchased. Expansion Memory Use this socket to install a memory module to Socket...
Page 42 The Grand Tour Battery Pack Lock When you slide this into its locked position, the battery pack cannot be released even if you attempt to slide the battery pack latch into its open position. Battery Pack Latch With the Battery Pack Lock in its unlocked position, you can slide this latch in order to remove the battery pack.
Page 43: Front With The Display Open
The Grand Tour Front with the display open The following figure shows the front of the computer with the display open. To open the display, push the latch on the front of the display and lift it up. Position the display at a comfortable viewing angle. ISPLAY CREEN NTERNET...
Page 44 (This function is available depending on the model you purchased.) The button setting can be changed in TOSHIBA Controls properties. To access the TOSHIBA Controls properties, click start, click the Control Panel, click Printers and the Software and select the TOSHIBA Controls icon.
Page 45: Keyboard Indicators
The Grand Tour Play/Pause Press this button to begin playing an audio CD, a DVD movie or digital audio files. This button also acts as a Pause button. (The availability of this function depends on the model you purchased.) Stop Stops playing the CD, DVD or digital audio.
Page 46: Optical Disc Drive
The Grand Tour Optical Disc drive The computer will either have a CD-RW/DVD-ROM drive, DVD-ROM drive or double layer DVD Super Multi drive depending on its configuration. An ATAPI interface controller is used for the operation of these optical drives. When the computer is accessing a disc, an indicator on the drive glows.
Page 47 The Grand Tour CD-RW/DVD-ROM drive The full-size CD-RW/DVD-ROM drive module lets you record data to rewritable CDs as well as run either 12 cm (4.72") or 8 cm (3.15") discs without using an adapter. The read speed is slower at the center of a disc and faster at the other edge.
Page 48 Power and Power-Up Modes, for details. The AC adapter Use of the wrong adapter could damage your computer. TOSHIBA assumes no liability for any damage in such case. The output rating for the computer is 19 volts DC. Please use only the AC Adapter supplied with the computer or an AC adapter certified by TOSHIBA.
Page 49: Chapter 3 Getting Started
Chapter 3 Getting Started This chapter provides basic information to get you started using your computer. It covers the following topics: ■ Setting up your work space - for your health and safety Be sure also to read Instruction Manual for Safety & Comfort. This guide, which is included with the computer, explains product liability.
Page 50: General Conditions
Getting Started General conditions In general, if you are comfortable, so is your computer, but read the following to make sure your work site provides a proper environment. ■ Make sure there is adequate space around the computer for proper ventilation.
Page 51: Seating And Posture
Getting Started Seating and posture The height of your chair in relation to the computer and keyboard as well as the support it gives your body are primary factors in reducing work strain. Posture and positioning of the computer ■ Place your chair so that the keyboard is at or slightly below the level of your elbow.
Page 52: Work Habits
Getting Started Work habits A key to avoiding discomfort or injury from repetitive strain is to vary your activities. If possible, schedule a variety of tasks into your work day. If you must spend long periods at the computer, finding ways to break up the routine can reduce stress and improve your efficiency.
Page 53: Connecting The Ac Adapter
Power and Power-Up Modes. Use of the wrong adapter could damage your computer. TOSHIBA assumes no liability for any damage in such case. The output rating for the computer is 19 volts DC. 1. Connect the power cord to the AC adapter.
Page 54: Opening The Display
Getting Started Opening the display The display panel can be rotated in a wide range of angles for optimal viewing. 1. Push the display latch on the front of the computer. Opening the display 2. Lift the panel up and adjust it to the best viewing angle for you. Use reasonable care when opening and closing the display panel.
Page 55: Starting Up For The First Time
Getting Started Turning on the power Starting up for the first time When you first turn on the power, the computer's initial screen is the ® Windows XP Startup Screen Logo. Follow the on-screen directions for each screen. During setup, you can click the Back button to return to the previous screen.
Page 56: Hibernation Mode
For the computer to shut down in hibernation mode, the hibernation feature must be enabled in two places in Power Options: Hibernate tab and TOSHIBA Power Saver: Basic Setup tab. Otherwise, the computer will shut down in Standby mode. If battery power becomes depleted, data saved in Standby will be lost.
Page 57: Starting Hibernation
2. Open Performance and Maintenance and open Power Options. 3. Select the Hibernation tab. 4. Select Enable Hibernate, then click OK button. 5. Open Toshiba Power Saver. 6. Select Setup Action tab. 7. Enable the desired Hibernation settings for When I press the power button and When I close the lid of my portable computer.
Page 58: Standby Mode
If the computer is not used or accessed in any way, including areas such as the receipt of an e-mail, for approximately 15 or 30 minutes when the AC adapter is connected, it will automatically enter Standby Mode. This function is the default setting within the TOSHIBA Power Saver utility. ■...
Page 59: Restarting The Computer
1. Click Start, then Shut Down and then Stand by. 2. Close the display panel. This feature must be enabled. Refer to the Setup Action tab in TOSHIBA Power Saver Utility described in the Control Panel. 3. Press the power button. This feature must be enabled. Refer to the Setup Action tab in TOSHIBA Power Saver Utility described in the Control Panel.
Page 60: Restoring The Preinstalled Software From The Product
2. Switch on the computer and, when the In Touch with Tomorrow TOSHIBA prompt appears, press the F12 key to display the Boot Menu. 3. Use the cursor key to select the CD-ROM/DVD drive in the display menu.
Page 61: Restoring Toshiba Utilities And Drivers
Restoring TOSHIBA utilities and drivers If Windows is working properly, individual drivers or applications can be separately restored. The TOSHIBA Tools & Utilities folder (C:\TOOLSCD) contains drivers and applications, which are included with your computer system. If your system drivers or applications have become damaged in some way, you can reinstall most of the components from this folder.
Page 62: Chapter 4 Operating Basics
Chapter 4 Operating Basics This chapter gives information on basic operations including using the TouchPad, optical disc drives, the internal modem, LAN and wireless LAN. It also provides tips on caring for your computer and on heat dispersal. Using the TouchPad To use the TouchPad, simply move your finger tip across it in the direction you want the on-screen pointer to go.
Page 63: Using The Internal Modem
Operating Basics Do not press on the TouchPad too hard or press a sharp object such as a ball point pen against it. The TouchPad could be damaged. The TouchPad has similar functions to a two-button mouse with a scroll wheel.
Page 64: Region Selection
1. Open the Modem Region Select application. It is located on the Programs menu at TOSHIBA > Networking. Do not use the Country/Region Select function in the Modem setup utility in the Control Panel if the function is available. If you change the Country/ Region in the Control Panel, the change may not take effect.
Page 65: Modem Selection
Operating Basics Settings You can enable or disable the following settings: AutoRun Mode Region Select Utility starts automatically when you start up the operating system. Open the Dialing Properties dialog box after selecting region. The dialing properties dialog box will be displayed automatically after you select the region.
Page 66 If you find that the modem speed is low or communication is interrupted when you are using the modem, please set the CPU speed to Maximum within the TOSHIBA Power Saver utility. Disconnecting To disconnect the internal modem cable, follow the steps below.
Page 67: Lan
Operating Basics The computer is equipped with networking hardware that supports Ethernet LAN (10megabits per second, 10BASE-T) and Fast Ethernet LAN (100 megabits per second, 100BASE-TX). This section describes how to connect/disconnect to a LAN. Do not install or remove an optional memory module while the Wake-up on LAN feature is enabled.
Page 68: Wireless Lan
Internet is an open invitation for outsiders to abuse your ISP account and privileges. 2. TOSHIBA is not liable for the eavesdropping on your data due to the use of the wireless LAN connection and any damage that may occur thereof.
Page 69: Using Optical Disc Drives
Operating Basics Wireless communication switch You can enable or disable the wireless LAN function with the on/off switch. No transmissions are sent or received when the switch is off. Slide the switch forward to turn it on and backward to turn it off. Turn the switch off in airplanes and hospitals.
Page 70 Operating Basics Eject button Pressing the eject button b. Pressing the eject button will not open the drawer when the computer's power is off. If the power is off, you can open the drawer by inserting a slender object (about 15 mm) such as a straightened paper clip into the eject hole just to the right of the eject button.
Page 71 Operating Basics 4. Lay the disc, label side up, in the drawer. Inserting a disc Be careful not to touch the lens or the area around it. Doing so could cause the drive to malfunction. 5. Press gently at the center of the disc until you feel it click into place. The disc should lie below the top of the spindle, flush with its base.
Page 72: Removing Compact Discs
Operating Basics Removing compact discs To remove the disc, follow the steps below. Do not press the eject button while the computer is accessing the disc drive. Wait for the optical disc indicator to go out before you open the drawer.
Page 73 Operating Basics Buttons The Internet button and the CD/DVD button can be assigned functions and applications in the TOSHIBA Controls Properties. CD/DVD play control buttons In addition to the power button, the following four buttons control functions relating to the playback of optical media and digital audio data:...
Page 74: Express Media Player
Operating Basics Express Media Player The Express Media player is installed depending on the configuration you purchased. Express Media Player is a quick play feature that enables users to perform DVD and CD playback without loading Windows. Notes for Express Media Player Express Media Player (CD) and Express Media Player (DVD) Usage ■...
Page 75: Express Media Player Settings
Operating Basics ■ To remove a disc from the drive while the player is stopped, simply press the eject button on the drive. If the player is playing the media, press the "E" key, which will stop the player and eject the disc. If you manually remove the disc by using the eject hole on the drive during playback, the DVD-Video playback may not work.
Page 76 Operating Basics Keyboard Code Keyboard Code US English Portuguese UK English Russian Spanish Swedish French Turkish Canadian- Arabic French Italian Belgian Hebrew Danish Japanese German Korean Swiss-German Norwegian Greek Polish Table 2 Keyboard Code Functions via the Front operation panel and the keyboard in the Express Media Player mode This list shows how the functions available from the keyboard correspond to those available from the Front operation panel.
Page 77 Operating Basics Select track 8 Select chapter 8 Select track 9 Select chapter 9 Normally functions Normally functions as “0” as “0” Displays the top menu Displays the menu Move the cursor Move the cursor Move the cursor  Move the cursor Enter Executes the Executes the...
Page 78: Writing Cds On A Cd-Rw/Dvd-Rom Drive
Operating Basics Ctrl + S Shuffle Changes the Changes the screen screen Changes the angle Changes the subtitle Changes the audio channel Select the title Slow play Display the Display the keyguide keyguide Eject Eject Changes the SRS WOW XT Mode * * SRS function is disable as a default.To enable it, follow these steps.
Page 79: Before Writing Or Rewriting
Hitachi Maxell Ltd. CD-RW: MITSUBISHI CHEMICAL CORPORATION RICOH Co., Ltd. TOSHIBA has confirmed the operation of CD-R and CD-RW media of the manufacturers above. Operation of other media cannot be guaranteed. ■ CD-RW can generally be rewritten about 1,000 times. However, the actual number of rewrites is affected by the quality of the media and the way it is used.
Page 80: Writing Cds/Dvds On A Dvd Super Multi Drive Supporting Double Layer Disc Recording
Operating Basics ■ Write from the computer's hard disk drive to the CD. Do not try to write from shared devices such as a LAN server or any other network device. ■ Writing with software other than Sonic RecordNow! has not been confirmed.
Page 81 Based on TOSHIBA's limited compatibility testing, we suggest the following manufacturers of CD-R/RW and DVD-R/+R/-RW/+RW/-RAM/ +R DL/-R DL media. However, in no event does TOSHIBA guarantee the operation, quality or performance of any disc. Disc quality can affect write or rewrite success rates.
Page 82 Operating Basics *DVD-RAM: DVD Specifications for DVD-RAM Disc for Version 2.0, Version 2.1 or Version 2.2 Matsushita Electric Industrial Co., Ltd. Hitachi Maxell Ltd. *DVD Multi drive and DVD Super Multi can use DVD-RAM. DVD+R (Double MITSUBISHI CHEMICAL CORPORATION Layer): DVD-R (Dual MITSUBISHI CHEMICAL COPRORATION Layer):...
Page 83: When Writing Or Rewriting
Operating Basics ■ Before you enter standby/hibernation mode, be sure to finish DVD-RAM writing. Writing is finished if you can eject DVD-RAM media. ■ Be sure to close all other software programs except the writing software. ■ Do not run software such as a screen saver, which can put a heavy load on the CPU.
Page 84: When Using Windvd Creator 2 Platinum
Operating Basics When Using WinDVD Creator 2 Platinum How to learn more about InterVideo WinDVD Creator Click the icon “Additional Software CD” on your Desktop to install the WinDVD Creator using the Additional Software CD. The Additional Software CD is bundled depending on the model you purchased.
Page 85 Operating Basics ■ Do not perform any of the following actions: - Operate the computer for any other function, including using a mouse or TouchPad or closing/opening the LCD panel. - Bump or cause vibration to the computer. - Use the Mode control button and Audio/Video control button to reproduce music or voice.
Page 86: Recordnow! Basic For Toshiba
Operating Basics RecordNow! Basic for TOSHIBA Note the following limitations when you use RecordNow!: ■ DVD-Video cannot be created using RecordNow! ■ DVD-Audio cannot be created using RecordNow! ■ You cannot use the RecordNow! "Audio CD for Car or Home CD Player"...
Page 87: Dla For Toshiba
3. Mark the Verify data written to the disc after burning check box in the Data Options. 4. Click the OK button. DLA for TOSHIBA Note the following limitations when you use DLA: ■ This software supports only rewritable discs (DVD+RW, DVD-RW, and CD-RW).
Page 88: Media Care
Operating Basics Media Care This section provides tips on protecting data stored on your discs and diskettes. Handle your media with care. The following simple precautions will increase the lifetime of your media and protect the data stored on it: 1.
Page 89: Tv-Out
Operating Basics TV-Out Use the TV-Out port to connect to a television. Be sure to use a 4 pin type S-video cable. For more details, see Appendix TV Out Port Setting up more than one display You can set up your computer to utilize more than one display, effectively spreading a single desktop screen across two monitors.
Page 90: Cleaning The Computer
Operating Basics Cleaning the computer To help ensure long, trouble-free operation, keep the computer free of dust and use care with liquids around the computer. ■ Be careful not to spill liquids into the computer. If the computer does get wet, turn the power off immediately and let the computer dry completely before you turn it on again.
Page 91: Chapter 5 The Keyboard
Chapter 5 The Keyboard The computer's keyboard layouts are compatible with a 101/102-key enhanced keyboard. By pressing some keys in combination, all the 101/ 102-key keyboard functions can be executed on the computer. The number of keys on your keyboard depends on which country/region's keyboard layout your computer is configured with.
Page 92: F1 ... F12 Function Keys
Soft keys: Fn key combinations The Fn (function) is unique to TOSHIBA computers and is used in combination with other keys to form soft keys. Soft keys are key combinations that enable, disable or configure specific features.
Page 93: Hotkeys
The Keyboard Press Fn + Enter to simulate Enter on the enhanced keyboard's numeric keypad. Press Fn + Ctrl to simulate the enhanced keyboard's right Ctrl key. Hotkeys Fn + ESC Volume Mute Turns the volume on and off. Fn + F1 Instant Security Enters screen saver mode and blanks the screen.
Page 94: Windows Special Keys
2 key while holding down the Fn key. Before using Fn+1 and Fn+2, you must install the TOSHIBA Zooming Utility. Please be aware that this 'zooming' function is only available within Microsoft Internet Explorer, Microsoft Office, Windows Media Player and Adobe Reader, and for the icons on the desktop.
Page 95: Keypad Overlay
The Keyboard Keypad overlay Your computer's keyboard does not have an independent numeric keypad, but its numeric keypad overlay functions like one. The keys in the center of the keyboard with white letters make up the numeric keypad overlay. The overlay provides the same functions as the numeric keypad.
Page 96: Generating Ascii Characters
The Keyboard Temporarily using normal keyboard (overlay on) While using the overlay, you can temporarily access the normal keyboard without turning off the overlay: 1. Hold down Fn and press any other key. All keys will operate as if the overlay were off.
Page 97: Chapter 6 Power And Power-Up Modes
Chapter 6 Power and Power-Up Modes The computer's power resources include the AC adapter and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power up modes. Power conditions The computer's operating capability and battery charge status are affected by the power conditions: whether an AC adapter is connected, whether a...
Page 98 • LED: Battery flashes amber DC IN off Battery capacity Computer goes into Hibernation or shuts down exhausted (depending on the TOSHIBA Power Saver setting) No battery • No operation • LED: Battery off installed DC IN off User’s Manual...
Page 99: Power Indicators
Power and Power-Up Modes Power indicators As shown in the above table, the Battery, DC IN and Power indicators alert you to the computer's operating capability and battery charge status Battery indicator Check the Battery indicator to determine the status of the battery. The following indicator lights indicate the battery status.
Page 100: Battery Types
Press <F1> to resume, <F2> to Setup. The computer's RTC battery is a lithium battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed of.
Page 101: Care And Use Of The Battery Pack
3. Set correct time and date. If you still see the error message after performing the above actions, please contact your TOSHIBA service representative. Care and use of the battery pack The battery pack is a vital component of portable computing. Taking proper care of it will help ensure longer operating time on battery power as well as a longer life for your battery pack.
Page 102 Never use the computer again until it has been checked by a TOSHIBA service provider. It might generate smoke or fire, or the battery pack might rupture. 3. Make sure the battery is securely installed in the computer before attempting to charge the battery pack.
Page 103: Charging The Batteries
Power and Power-Up Modes 5. Charge the battery pack only in an ambient temperature between 5 and 30 degrees Celsius. Otherwise, the electrolyte solution might leak, battery pack performance might deteriorate and the battery life might be shortened. 6. Be sure to monitor the remaining battery power. If the battery pack or real time clock battery discharge completely, Standby Mode will not function, and data in memory will be lost, and the computer might register an incorrect time and date.
Page 104: Battery Charging Notice
Power and Power-Up Modes Time The following table shows the time required to fully charge a discharged battery. Charging time (hours) Battery type Power on Power off Battery pack about 12 or longer about 4 or longer RTC battery about 24 about 24 with AC or Battery pack The charging time when the computer is on is affected by ambient...
Page 105: Monitoring Battery Capacity
Leaving the AC adapter connected will shorten battery life. At least once a week, run the computer on battery power until the battery is fully discharged, then recharge the battery. Monitoring battery capacity Remaining battery power can be monitored by the TOSHIBA Power Saver. Refer to Utilities in Chapter 1, Features.
Page 106: Replacing The Battery Pack
Power and Power-Up Modes Retaining data with power off (standby mode) When you turn off your computer with fully charged batteries, the batteries retain data/charge for the following approximate time periods: Battery Approximately 1.5 days (Standby mode, 8-cell) Approximately 1 days (Standby mode, 6-cell) Approximately 0.75 days (Standby mode, 4-cell) Approximately 1 month (Shut down mode, both) RTC battery...
Page 107: Installing The Battery Pack
The battery pack is a lithium ion battery, which can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. 1. Turn the computer's power off. 2. Disconnect all cables connected to the computer.
Page 108: Toshiba Password Utility
4. Gently slide the battery into the battery bay until the latch clicks into place. Installing the battery pack TOSHIBA Password Utility The TOSHIBA Password Utility provides two levels of password security: User and Supervisor. Passwords set in TOSHIBA Password Utility are different from the ®...
Page 109: Power-Up Modes
Power and Power-Up Modes Supervisor password If you set a supervisor password, some functions will be restricted when a user logs on with the user password. To set a supervisor password: TOSHIBA Assist SECURE Supervisor password This utility lets you do the following: ■...
Page 110: Panel Power Off/On
This feature automatically turns off the system in Standby or Hibernation mode if the computer is not used for a set duration. Refer to Special features, in Chapter 1, M50 Features for an explanation of how to set the duration. User’s Manual 6-14...
Page 111: Chapter 7 Hw Setup
Chapter 7 HW Setup This chapter explains how to use the TOSHIBA HW Setup utility to configure your computer. TOSHIBA HW Setup lets you configure settings for various hardware devices through a number of tabs titled General, Password, Display, Boot Priority, Keyboard, LAN, and USB.
Page 112: Boot Priority
HW Setup General This window displays the BIOS version and contains two buttons: Default Return all HW Setup values to the factory settings. About Display the HW Setup version. Setup This field displays BIOS Version and date. Password This tab allows you to set or reset the user password for power on. Display This tab lets you customize your computer's display settings for either the internal LCD screen or for an external monitor.
Page 113: Legacy Usb Support
HW Setup To select the boot drive you want, follow the steps below. 1. Boot-up your computer and press F12 to enter the boot menu. 2. The boot select screen will be displayed: Hard Disk Drive, CD/DVD, FDD, and LAN. 3.
Page 114 HW Setup Built-in LAN This feature enables or disables the Built-in LAN. Enabled Enables Built-in LAN function (Default). Disabled Disables Built-in LAN function. User’s Manual...
Page 115: Chapter 8 Optional Devices
Chapter 8 Optional Devices Optional devices can expand the computer's capabilities and its versatility. This chapter describes connection or installation of the following types of devices, which are available from your TOSHIBA dealer: Cards/Memory ■ PC card ■ Memory modules Power devices ■...
Page 116: Pc Card
The computer is equipped with a PC Card expansion slot that can accommodate one 5 mm Type II card. Any PC Card that meets industry standards (manufactured by TOSHIBA or other vendor) can be installed. The slots support 16-bit PC Cards, including PC Card 16's multifunction card and CardBus PC Cards.
Page 117: Removing A Pc Card
Optional Devices Removing a PC card 1. Click the Safely Remove Hardware icon on the Task Bar. 2. Click the PC Card you want to remove. 3. Press the eject button of the PC Card to extend it. 4. Press the extended eject button to pop the card out slightly. 5.
Page 118: Memory Expansion
In this case the computer will issue a warning. M50 series: There will be a long beep, 3 short beeps, 3 more short beeps and then a long beep when you turn the power on. In this case, shut down the power and remove the incompatible memory module.
Page 119 Optional Devices Removing the memory module socket cover 6. Fit the module's connectors into the computer's connectors at about a 45 degree angle and press the module carefully to ensure a firm connection. Do not touch the connectors on the memory module or on the computer. Debris on the connectors may cause memory access problems.
Page 120: Removing A Memory Module
Optional Devices Removing a memory module If you use the computer for a long time, the memory modules will become hot. In this case, let the memory modules cool to room temperature before you replace them. To remove the memory module, make sure the computer is in boot mode then: 1.
Page 121: Additional Battery Pack
Optional Devices Additional battery pack You can increase the portability of the computer with additional battery packs. If you're away from an AC power source and your battery runs low, you can replace it with a freshly charged battery. See Chapter 6, Power and Power-Up Modes.
Page 122 Optional Devices 1. Click Start >Control Panel > Appearance and Themes. 2. Choose Display to open the Display Properties dialog box 3. Click the Settings tab. 4. Click the Advanced button and choose Displays User’s Manual...
Page 123: Security Lock
Optional Devices 5. Click the TV button to open the TV Properties dialog box. 6. Adjust the TV properties accordingly. Security lock A security lock enables you to anchor your computer to a desk or other heavy object to help prevent unauthorized removal of the computer. Attach one end of a cable to the desk and the other end to the security lock slot on the right side of the computer.
Page 124: Troubleshooting
Chapter 9 Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring.
Page 125: Preliminary Checklist
Troubleshooting Preliminary checklist Consider the simplest solution first. The items in this checklist are easy to fix and yet can cause what appears to be a serious problem. ■ Make sure you turn on all peripheral devices before you turn on the computer.
Page 126: Hardware And System Checklist
Troubleshooting The problems may be caused by your software. If Software you cannot load a software package, the media may be damaged or the program might be corrupted. Try loading another copy of the software. If an error message appears while you are using a software package, check the software documentation.
Page 127: Self Test
If any of the following conditions are present, the self test failed: ■ The computer stops and does not proceed to display information or messages except the TOSHIBA logo. ■ Random characters appear on the screen, and the system does not function normally.
Page 128: Overheating Power Down
Troubleshooting Power When the computer is not plugged into an AC outlet, the battery pack is the primary power source. However, your computer has a number of other power resources, including an intelligent power supply and Real Time Clock battery. These resources are interrelated and any one could affect apparent power problems.
Page 129 If you do not think the battery is at the end of its operating life, see your dealer. Battery doesn't power Check the power consumption settings in the the computer as long as TOSHIBA Power Saver Utility. Consider using a expected. power saving mode. User’s Manual...
Page 130: Lcd Panel
Troubleshooting Keyboard Keyboard problems can be caused by your setup configuration. For more information refer to Chapter 5, Keyboard. Problem Procedure Some letter keys Check that the numeric keypad overlay is not produce numbers. selected. Press Fn + F10 and try typing again. Output to screen is Make sure the software you are using is not garbled.
Page 131: Hard Disk Drive
Troubleshooting Hard disk drive Problem Procedure Computer does not boot Insert a system diskette and reboot. from hard drive. There may be a problem with your operating system files. Refer to your operating system documentation. Slow performance Your files may be fragmented. Run SCANDISK and defragmenter to check the condition of your files and disk.
Page 132 Tour. Cannot write correctly If you have trouble writing, make sure you are observing the following precautions: ■ Use only media recommended by TOSHIBA. ■ Do not use the mouse or keyboard during writing. ■ Use only the software supplied with the computer for recording.
Page 133 Troubleshooting DVD Super Multi drive with double layer disc recording support For more information, refer to Chapter 4, Operating Basics. Problem Procedure You cannot access a Make sure the drive's drawer is securely closed. disc in the drive Press gently until it clicks into place. Open the drawer and make sure the disc is properly seated.
Page 134: Diskette Drive
Procedure Cannot write correctly If you have trouble writing, make sure you are observing the following precautions: ■ Use only media recommended by TOSHIBA. ■ Do not use the mouse or keyboard during writing. ■ Use only the software supplied with the computer for recording.
Page 135: Sound System
Troubleshooting Sound system Problem Procedure No sound is heard Adjust the volume control dial. Check the software volume settings. If appropriate, make sure the headphone connection is secure. Check Windows Device Manager and ensure the sound function is enabled and that settings for I/O address, interrupt level and DMA are correct for your software and do not conflict with other hardware devices that you have connected to the...
Page 136: Usb Mouse
Troubleshooting USB mouse Problem Procedure On-screen pointer does The system might be busy. If the pointer is not respond to mouse shaped as an hourglass, wait for it to resume its movement normal shape and try again to move it. Make sure the mouse is properly connected to the USB port.
Page 137: Tv Output Signal
Troubleshooting TV output signal Problem Procedure Display on TV is poor Make sure the TV type is correct for your area: NTSC (US) or PAL (Europe). No display Try adjusting the contrast and brightness controls on the external monitor. Press hotkeys Fn + F5 to change the display. Refer to Chapter 5, Keyboard.
Page 138 Troubleshooting Memory expansion Refer also to Chapter 8, Optional Devices, for information on installing memory modules. Problem Procedure The computer hangs up Make sure the memory module installed in the and issues beep expansion slot is compatible with the computer. sounds.
Page 139 Troubleshooting Problem Procedure Character display In data transmission, make sure the parity bit and becomes garbled stop bit settings correspond with those of the during a communication remote computer. Check the flow control and communication protocol. You cannot receive an Check the "rings before auto answer"...
Page 140: Toshiba Support
Modes. TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience may be related to software or the operating system, it is important to investigate other sources of assistance first.
Page 141: Where To Write
Troubleshooting Where to write If you are still unable to solve the problem and suspect that it is hardware related, write to TOSHIBA at the location listed in the accompanying warranty booklet or visit www.toshiba-europe.com on the Internet. User’s Manual...
Page 142: Specifications
Appendix A Specifications This appendix summarizes the computer's technical specifications. Dimensions 343mm x 242mm x 29.8mm (Front)/38mm (Rear) Weight Starting at 2.26kg/4.99lbs Weight and Dimensions may vary depending on product configuration, vendor components, manufacturing variability and options selected. Environmental Requirements Conditions Ambient temperature Relative humidity...
Page 143 Specifications Built-in Modem Network control unit (NCU) Type of NCU Type of line Telephone line (analog only) Type of dialing Pulse Tone Control command AT commands EIA-578 commands Monitor function Computer's speaker Communication specifications Communication Data: Full duplex System Fax: Half duplex Communication Data:...
Page 144: Display Modes
Appendix B Display Modes This appendix contains a table listing all the display modes when the display is set to an external monitor. CRT Display Color Depth Refresh Rate Resolution (bpp) (Hz) 800 x 600 16 bpp 60, 75, 85, 100 32 bpp 60, 75, 85, 100 1024 x 768...
Page 145: Displaying Movies On A Tv Or Crt
Display Modes Displaying movies on a TV or CRT This section describes how to set up your system to display movies simultaneously on your computer's LCD and on an external TV or CRT monitor. Follow the steps below. 1. Open the Control Panel and click Appearance and Themes. 2.
Page 146 Display Modes 6. In the properties box, if any additional options are available for your particular device, set them to your liking. 7. Finally, click the ATI Overlay tab to adjust the video overlay properties. User’s Manual...
Page 147: Certification Agencies
Appendix C AC Power Cord and Connectors The power cord's AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Length: Minimum 2 meters...
Page 148 AC Power Cord and Connectors In Europe, two conductors power cord must be VDE type, H05VVH2-F or H03VVH2-F and for three conductors power cord must be VDE type, H05VV-F. For the United States and Canada, two pin plug configuration must be a 2-15P (250V) or 1-15P (125V) and three pin plug coniguration must be 6-15P (250V) or 5-15P (125V) as designated in the U.
Page 149: If Your Computer Is Stolen
What is your address, phone, and fax number? To register the theft online, please follow these procedures: ■ Fill in the TOSHIBA Theft Registration form (or a copy of it) below. ■ Attach a copy of your receipt showing where your computer was purchased.
Page 150 If your computer is stolen To register the theft online, please follow these procedures: ■ Visit www.toshiba-europe.com on the Internet. In the product area, choose Computer Systems. ■ In the Computer Systems page, open the Support & Downloads menu and choose the Stolen Units Database option.
Page 151: Toshiba Theft Registration
If your computer is stolen TOSHIBA Theft Registration Send to: TOSHIBA Europe GmbH Technical Service and Support Leibnizstr. 2 93055 Regensburg Germany Fax number: +49 (0) 941 7807 921 Country stolen: Machine type: (e.g.L20) Model number: (e.g. PSM50 YXT) Serial number: (e.g.
Page 152 Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference. Abbreviations AC: alternating current AGP: accelerated graphics port BIOS: basic input output system CD-ROM: Compact Disc-Read Only Memory CD-RW: Compact Disc-Read/Write CMOS: complementary metal-oxide semiconductor CPU: central processing unit CRT: cathode ray tube DC: direct current...
Page 153 Glossary RTC: real time clock SCSI: small computer system interface TFT: thin-film transistor USB: Universal Serial Bus VESA: Video Electronic Standards Association VGA: video graphics array WXGA: extended graphics array adaptor: A device that provides an interface between two dissimilar electronic devices.
Page 154 Glossary capacity: The amount of data that can be stored on a magnetic storage device such as a floppy disk or hard disk. It is usually described in terms of kilobytes (KB), where one KB = 1024 bytes and megabytes (MB), where one MB = 1024 KB.
Page 155 Glossary default: The parameter value automatically selected by the system when you or the program do not provide instructions. Also called a preset value. device driver: A program that controls communication between a specific peripheral device and the computer. The CONFIG.SYS file contains device drivers that MS-DOS loads when you turn the computer on.
Page 156 Glossary hard disk: A non-removable disk usually referred to as drive C. The factory installs this disk and only a trained engineer can remove it for servicing. Also called fixed disk. hard disk drive (HDD): An electromechanical device that reads and writes a hard disk.
Page 157 Glossary modem: Derived from modulator/demodulator, a device that converts (modulates) digital data for transmission over telephone lines and then converts modulated data (demodulates) to digital format where received. monitor: A device that uses rows and columns of pixels to display alphanumeric characters or graphic images.
Page 158 TFT display: A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology with thin film transistor (TFT) to drive each cell. Touch Pad: A pointing device integrated into the TOSHIBA computer palm rest. Universal Serial Bus: This serial interface lets you communicate with several devices connected in a chain to a single port on the computer.

Toshiba M50 User Manual

Chapter 1 M50 Features

Chapter 2 The Grand Tour

Chapter 3 Getting Started

Chapter 4 Operating Basics

Chapter 5 The Keyboard

Chapter 6 Power and Power-Up Modes

Chapter 7 HW Setup

Chapter 8 Optional Devices

Chapter 9 Troubleshooting

Appendix A Specifications

Appendix B Display Modes

Appendix C AC Power Cord and Connectors

Quick Links

Related Manuals for Toshiba M50

Summary of Contents for Toshiba M50

Table of Contents