Table of Contents
Advertisement
Available languages
Available languages
Quick Links
INSTALLATIONINSTRUCTIONS
SLIDE-IN ELECTRIC RANGES
INSTRUCTI.ONS D'INSTALLATIONDESCUISINIERES
ELECTRIQUES ENCASTRABLES
Tableof Contents/Table des mati@res
RAN GE SAFETY .............................................................................
2
................................................
3
Tools and Parts ............................................................................
3
Location Requirements ................................................................
3
Electrical Requirements - U.S.A. Only ......................................... 5
Electrical Requirements - Canada Only ....................................... 6
Countertop Preparation ...............................................................
6
INSTALLATION
INSTRUCTIONS ..................................................
6
Unpack Range ..............................................................................
6
Adjust Leveling Legs ....................................................................
7
Install Anti-Tip Bracket .................................................................
7
Electrical Connection - U.S.A. Only .............................................
8
Verify Anti-Tip Bracket Is Installed and Engaged ...................... 13
Level Range ................................................................................
14
Complete Installation .................................................................
14
Moving the Range ......................................................................
15
SleCURITle DE LA CUISINIERE ...................................................
16
EXIGENCES D'INSTALLATION ...................................................
17
Outillage et pieces ......................................................................
17
Exigences d'emplacement .........................................................
17
electriques ..........................................................
19
Preparation du plan de travail ....................................................
19
D'INSTALLATION .............................................
20
Deballage de la cuisiniere ..........................................................
20
Reglage des pieds de nivellement ............................................. 20
Installation de la bride antibasculement
.................................... 21
bien installee et engagee ............................................................
21
Reglage de I'aplomb de la cuisiniere ......................................... 22
Achever I'installation ..................................................................
22
Deplacement de la cuisiniere .....................................................
23
iMPORTANT:
Save for local electrical inspector's use.
iMPORTANT
:
,&,conserver pour consultation par I'inspecteur local des installations 61ectriques.
W10430949B
Advertisement
Table of Contents
Related Manuals for Whirlpool GY399LXUB03
Summary of Contents for Whirlpool GY399LXUB03
-
Page 1: Table Of Contents
INSTALLATIONINSTRUCTIONS SLIDE-IN ELECTRIC RANGES INSTRUCTI.ONS D'INSTALLATIONDESCUISINIERES ELECTRIQUES ENCASTRABLES Tableof Contents/Table des mati@res RAN GE SAFETY ................SleCURITle DE LA CUISINIERE ........... INSTALLATION REQUIREMENTS ..........EXIGENCES D'INSTALLATION ........... Tools and Parts ................Outillage et pieces ..............Location Requirements ..............Exigences d'emplacement ............Electrical Requirements - U.S.A. -
Page 2: Range Safety
RANGE SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word "DANGER"... -
Page 3: Installation Requirements
INSTALLATION REQUIREMENTS Gather the required tools and parts before starting installation. IMPORTANT: Observe all governing codes and ordinances. Read and follow the instructions provided with any tools listed • It is the installeCs responsibility to comply with installation here. clearances specified on the model/serial rating plate. The Tools needed model/serial rating plate is located on the side of the oven... - Page 4 Cabinet Dimensions Product Dimensions Cabinet opening dimensions shown are for 25" (64.0 cm) countertop depth, 24" (61.0 cm) base cabinet depth and 36" (91.4 cm) countertop height. IMPORTANT: If installing a range hood or microwave hood combination above the range, follow the range hood or microwave hood combination installation instructions dimensional clearances above the cooktop surface.
-
Page 5: Location Requirements
Ifcodes permit and a separate ground w ire isused, i tis If connecting to a 4-wire system: recommended thataqualified electrical installer determine that This range is manufactured with the ground connected to the theground p ath andwire gauge areinaccordance withlocal neutral by a link. -
Page 6: Installation Instructions
**If connecting to a 50-amp circuit, use a 50-amp rated cord with kit. For 50-amp rated cord kits, use kits that specify use with a nominal 13/8"(34.9 mm) diameter connection opening. • A time-delay fuse or circuit breaker is recommended. •... - Page 7 5. To remove cardboard bottom, place range on its back, take 4 cardboard corners from the carton. Stack one cardboard corner on top of another. Repeat with the other 2 corners. 1. Remove the anti-tip bracket that is taped in the storage Place them lengthwise on the floor behind the range to drawer.
- Page 8 Direct Wire Power Supply Cord Electrical Shock Hazard Electrical Shock Hazard Disconnect power before servicing. Disconnect power before servicing. Use a new 40 amp power supply cord. Use 8 gauge copper or 6 gauge aluminum wire. Plug into a grounded outlet. Electrically ground range.
-
Page 9: Complete Installation
Style 2: Direct wire strain relief • Replace cord/conduit plate and insert screws. • Use Phillips screwdriver to remove screws from panel on back of range. Assemble a UL listed conduit connector in the opening. • Lift range back panel up and off. A. - Page 10 Electrical Connection Options Feed the power supply cord through the opening in the cord/ conduit plate on bottom of range. Allow enough slack to If your home has: And you will be Go to Section: easily attach the wiring to the terminal block. connecting to: 4-wire connection: 4-wire receptacle...
- Page 11 3-wire connection: Power Supply Cord Direct Wire Installation: Copper or Aluminum Wire Use this method only if local codes permit connecting chassis This range may be connected directly to the fuse disconnect ground conductor to neutral wire of power supply cord. circuit breaker box.
- Page 12 Pull the conduit through the strain relief on cord/conduit plate 6. Use 3/8"nut driver to connect the neutral (white) wire to the on bottom of range. Allow enough slack to easily attach center terminal block post with one of the 10-32 hex nuts. wiring to the terminal block.
- Page 13 Attach terminal lugs to line 1 (black), bare (green) ground, and line 2 (red) wires. Loosen (do not remove) the setscrew on the front of the terminal lug and insert exposed wire end through bottom of terminal lugs. Securely tighten setscrew to torque as shown in the following Bare Wire Torque Specifications On models with a storage drawer: chart.
-
Page 14: Adjust Leveling Legs
5. Slide range back so the rear range foot is inserted into the slot of the anti-tip bracket. IMPORTANT: If the back of the range is more than 2" (5.1 cm) 1. Check that all parts are now installed. If there is an extra part, from the mounting wall, the rear range foot may not engage the go back through the steps to see which step was skipped. -
Page 15: Install Anti-Tip Bracket
_V_u_t_ U _ __ _ For direct-wired ranges: Electrical Shock Hazard Tip Over Hazard A child or adult can tip the range and be killed. Disconnect power before servicing. Install anti-tip bracket to floor or wall per installation Replace all parts and panels before operating. instructions. - Page 16 SECURITE DE LA CUISINIERE Votre securite et celle des autres est tres importante. Nous donnons de nombreux messages de s_curit_ importants dans ce manuel et sur votre appareil m_nager. Assurez-vous toujours lire tousles messages de s_curit_ et de vous y conformer. Ce symbole d'alerte de s_curit_ vous signale les dangers potentiels de d_c_s et de blessures graves &...
-
Page 17: Exigencesd'installation
EXIGENCESD'INSTALLATION Rassembler les outils et pieces necessaires avant de commencer IMPORTANT : Observer les dispositions de tous les codes et I'installation. Lire et suivre les instructions fournies avec les outils r_glements en vigueur. indiqu6s ici. • C'est a I'installateur qu'incombe la responsabilite Outils n_cessaires respecter les distances de separation exigees, specifiees sur... - Page 18 Dimensions du produit Dimensions du placard Les dimensions de I'espace d'installation entre les placards correspondent & une installation entre des placards de 24" (61,0 cm) avec plan de travail de 25" (64,0 cm) de profondeur et hauteur de 36" (91,4 cm). IMPORTANT : En cas d'installation d'une hotte ou d'un...
-
Page 19: Preparation Du Plan De Travail
Ko s %_..p.,=_ ,u_,, %,,_+4 ;,F s2+_;_ Les bords lateraux de la table de cuisson de la cuisini@re encastrable seront places en chevauchement sur les extremitSs du plan de travail. Si la largeur de I'espace disponible est de 30" (76,2 cm), et si la rive avant du plan de travail est plane eta I'equerre, aucune preparation du plan de travail ne sera necessaire. -
Page 20: Instructions D'installation
INSTRUCTIONS D'INSTALLATION Si un ajustement de la hauteur de la cuisiniere est necessaire, utiliser une cl@ou une pince pour desserrer les 4 pieds de nivellement. Ceci dolt @treeffectu@ alors que la cuisini@re repose sur sa Risque du poids e×cessif partie posterieure ou qu'elle est supportee par 2 pieds apres Utiliser deux ou plus de personnes pour d_placer avoir @t@ replacee en position verticale. - Page 21 e le ci bde ben, " " 1. Oter la bride antibasculement fixee par du ruban adhesif & I'interieur du tiroir de remisage. Sur les modiles avec tiroir de remisage 2. Determiner la methode de montage a utiliser : au plancher ou 1.
- Page 22 5. Faire glisser de nouveau la cuisiniere de fagon & ce que le pied arriere de la cuisiniere se trouve dans la fente de la bride antibasculement. 1. Verifier que toutes les pieces sont maintenant installees. S'il IMPORTANT : Si I'arriere de la cuisiniere se trouve a plus de reste une piece, passer en revue les differentes etapes pour 2"...
-
Page 23: Verifier Que La Bride Antibasculement Est Bien Installee Et Engagee
Si le deplacement de la cuisiniere est necessaire pour le nettoyage ou I'entretien : 1. Faire glisser la cuisiniere vers I'avant. 2. Debrancher le cordon d'alimentation electrique. 3. Effectuer le nettoyage ou I'entretien. 4. Brancher le cordon d'alimentation electrique. 5. Faire glisser la cuisiniere vers I'arriere de fa£_on& ce que le pied arriere de la cuisiniere se trouve sous la bride antibasculement. - Page 24 W10430949B 12/12 © 2012 Whirlpool Corporation. All rights reserved. Used under license in Canada Printed in U.S.A. Tous droits reserves. Utilisee sous licence au Canada. Imprime aux E.-U.