Related Manuals for LG DC9201SAU
Summary of Contents for LG DC9201SAU
-
Page 1: Range Hood
Range Hood Вытяжной шкаф Installation and Operating Instructions Инструкция по установке и эксплуатации DC9201SAU DC9201SSA DC9201SRS DC9202SAU DC9202SSA DC9202SRS DC9202SGF DC9202S Part No. MFL30049901... -
Page 2: Table Of Contents
To avoid the risk of accidents or damage to this appliance, It is essential to read these instructions before it is installed or used for the first time. And please keep this manual for later reference. The following symbol is used in the text. Safety information - Warning : Information concerning your personal safety. -
Page 3: Safety And Recommendation
Safety and Recommendation INSTALLATION The manufacturer will not be held liable for any damages resulting from incorrect or improper installation. The minimum safety distance between electric cook- top(hob) and the extractor hood is 450mm. But 600mm is recommended for better performance. When the hood is located above a gas appliance, the distance shall be AT LEAST 650mm. - Page 4 Safety and Recommendation MAINTENANCE Switch off or unplug the appliance from the mains supply before carrying out any maintenance work. Repairs should only be carried out by qualified specialists. If the supply cord is damaged, it must be replaced by the manufacturer, Its service agent or similarly qualified persons in order to avoid a hazard.
-
Page 5: How To Install
How to Install Dimension 570mm 904mm 430~800mm 544mm 503mm Min. 450mm above Electric Hob. 898mm (600mm is recommended for better performance) Min. 650mm above Gas Hob Components Component Quantity Wall plug Screw M4 x L30 Washer Screw M4 x L12 Body fixing bracket Chimney bracket Body... - Page 6 How to Install This appliance should be installed in the ducted version only. So it could not be installed in the recirculation version. Before installing the hood, remove 2 brackets of the top cover by releasing the screws. And refasten the screws in the holes.
- Page 7 How to Install Hanging and fixing Mount the hood body on the body fixing bracket which was installed.(Fig.2) Then align the center of body with the vertical line which was drawn. Adjust screws(a) to level the hood body. Secure the ‘Bracket of the body’ to the wall by fastening 2 screws using washers into the wall plugs which was inserted.(b)(M4XL30) Body fixing bracket Bracket of...
-
Page 8: How To Use (Dc9201S##)
How to Use (only for DC9201S##) Display Back Function Display Descriptions Lighting Light Turns Lighting ON and OFF First Speed. After running for 5 hours consecutively, it automatically turns off. Second Speed. After running for 5 hours consecutively, it automatically turns off. Third Speed. -
Page 9: How To Use (Dc9202S##)
How to Use (only for DC9202S##) Display Back Function Display Descriptions Lighting Light Turns Lighting ON and OFF First Speed. After running for 5 hours consecutively, it automatically turns off. Second Speed. After running for 5 hours consecutively, it automatically turns off. Third Speed. -
Page 10: How To Maintain
How to Maintain Washing the Grease filter Pull out the lower part of the door, then open up widely by rotating it.(Fig.5) Detach the grease filter by pushing the knob toward back and pulling it down.(Fig.6) After washing the grease filter, insert 2 flanges of the lower of the filter into the slots. - Page 11 How to Maintain Saturation Indicator Reset When flashing ‘F’ and ‘Motor Speed’ in the display window alternately, it means that the grease filters have to be washed. Press the ‘Saturation Indicator’ button in order to reset saturation indicator after washing and installing the filters. The lighting of the indication button will be off after resetting.