Table of Contents
Advertisement
AUDIO / VIDEO CONNECTIONS
AV Select and Setup
It is possible to connect a variety of additional equipment to this TV. The following pages detail how to
connect external equipment to both the front and rear of the TV.
Once your equipment is connected, use the following procedure to view the input:
Press the TV/AV menu button
Press the relevant on screen selector key to select the AV source you wish to view (for
example, press the green button to select AV2 if you have connected a video recorder
to the AV2 SCART socket).
The on screen selector keys that appear clear after a few seconds. If you want to select
an input when the keys are not shown, press the colour keys once more and the keys
will reappear.
Notes:
D This television may automatically switch over to the AV mode if the connected device sends a
switch signal to the SCART cable connector. In this case, the "EC" will be displayed in the left top
corner of the screen and the signal from the AV equipment (for the RGB signal the "EC/RGB" will be
displayed).The picture received will remain the same when the TV programme is changed.
D You may switch back to the television by pressing button "TV/AV" or by disconnecting the AV
device.
D You can also select an AV source using the TV/AV button on the control panel on the front of your
TV. Press the TV/AV button repeatedly until you reach the AV source you wish to view.
D When in AV mode a reduced number of options are available in the SOUND and SETUP menus
(eg: in the Setup menu there is no Tuning menu option).
Front sockets
Press and
release to open
Output from
Headphones socket
3.5mm Stereo
Plug
STEREO HEADPHONES
with 3.5mm Plug
Notes:
D Additional equipment and cables shown are not supplied with this TV set.
D For S---Video socket wiring information see page 34.
32
Video input to
S---Video
S---V
socket
Video input
to V socket
RCA Video
cable
TV/AV
Audio input
to L / R
sockets
2 x RCA
Audio
cables
CAMCORDER
Advertisement
Table of Contents
