Page 5
ENGLISH Ensure that the mounting device or in excessive heat. The mounting mobile holder is not installed where device and suction cup may be you might come in contact with it in damaged and adhesion may be the event of an accident or collision. impaired if the inside temperature exceeds +70°C (160°F).
Page 6
ENGLISH and clean the surface thoroughly with mounting device clockwise (1D) to a glass cleaner and a clean towel. If create a vacuum between the suction the ambient temperature is below cup and the windscreen. Check that +15°C (60°F), carefully warm the the mounting device is firmly surface and the suction cup with a attached (1E).
Page 7
ENGLISH protective sheet from the pad, do not Attach the holder to the touch the adhesive side. mounting device Press the suction cup of the mounting To attach the mobile holder to the device against the pad (2B). Turn the mounting device, insert the catch on catch on the mounting device to the the mounting device into the slot at...
ENGLISH plug to the charger connector on device out from the holder. Turn the your device. latch to its initial position, and slide the switch to the right to lock the To remove the device, slide the switch latch in place. to the left, lift the latch, and pull the Taking care of your device Your device is a product of superior...
This manual is also suitable for:
Cr-117Hh-20Easy mount hh-20Easy mount cr-116Easy mount cr-117