Table of Contents
Advertisement
UPS_SELF_TEST_WAS_SKIPPED
Severity
Description
UPS_SELF_TEST_IS_POSSIBLY_INACCURATE
Severity
Description
UPS_NEEDS_A_MANUAL_SELF_TEST
Severity
Description
Troubleshooting
UPS_WAS_SUCCESSFULLY_UPGRADED
Severity
Description
UPS_UPGRADE_HAS_FAILED
Severity
Description
UPS_WILL_BE_CONFIGURED_NOW
Severity
Description
UPS_CHANGE_DETECTED
Severity
Description
Troubleshooting
warning
A UPS self-test for UPS Component ID has been
skipped since not all UPS's/PSU's are OK or too
close to last self test.
informational
A UPS self-test for Component ID might be
inaccurate, capacity is Battery Capacity and is
lower or equal to the minimum capacity Minimum
Capacity for Self Test.
warning
Component ID finished component test but it
requires a manual self-test.
A component test should include self-testing, due
to network link failure to the UPS a manual
self-test is needed by waiting for full charge of the
UPS and then pressing the UPS self-test button.
informational
A UPS firmware upgrade has been successfully
completed on UPS Component ID.
warning
A UPS firmware upgrade has failed on UPS
Component ID.
informational
UPS Component ID will be loaded with new
configuration file due to Configure Reason.
informational
Component ID has been changed from a serial of
old_serial to new_serial.
If UPS replacement was intended, there is no
problem.
Chapter 24. Events
573
Hide quick links:
Advertisement
Chapters
Table of Contents
