Wi-Fi Protected Setup - Cisco Linksys WET610N Quick Installation Manual

Wireless-n ethernet bridge with dual-band

Hide thumbs Also See for Linksys WET610N:

Table of Contents

Available languages

WET610N

Wi-Fi Protected Setup

Use Wi-Fi Protected Setup to

create a wireless connection

between the Bridge and your

router . On your router, press the

button that looks like one of the

icons in the picture . You may

have to hold down this button

until an LED flashes .

Within two minutes, click

Connect on the Quickly Connect

Using Push Button screen .

Please wait while the Setup Wizard connects the Bridge to your wireless

network . Warnings from your firewall or security application may

appear . If necessary, click Always allow or Allow this time only to

allow the wireless connection .

You will connect the Bridge

to the device that you want to

equip with wireless .

Click Next .

The Bridge is connected to your

router with a network cable .

Disconnect this network cable

from your router .

If you need to move the device

that you want to equip with

wireless, then do so now . Click

Next .

Wireless-N Ethernet Bridge with Dual-Band

Wi-Fi Protected Setup Button on Router

English

Table of Contents