hit counter script

Video Cassette Tape Information; Precautions; Two Different Tape Speeds; Inserting A Cassette - Hitachi VT-MX4410A Owner's Manual

Vhs video deck
Table of Contents

Advertisement

VIDEO CASSETTE TAPE INFORMATION

VIDEO CASSETTE TAPE INFORMATION
This VCR will operate with any cassette that has the VHS mark. For best results, we
recommend the use of high-quality tapes. Do not use poor quality or damaged tapes.

PRECAUTIONS

• Avoid moisture. Moisture condensation may occur on the tape if it is moved from a
cold place to a warm place. Before using a tape with these conditions, to avoid damage
of the tape and your VCR, wait until the tape has warmed to room temperature and the
moisture has evaporated.
• Avoid extreme heat, high humidity and magnetic fields.
• Do not tamper with the cassette mechanism.
• Do not touch the tape with your fingers.

TWO DIFFERENT TAPE SPEEDS

Before recording, select the tape speed from: SP mode (Standard Play) or SLP mode
(Super Long Play).
The table below shows the maximum recording/playback time using T60, T120 or T160
tapes in each mode.
Tape Speed
Type of tape T60
SP mode
SLP mode
Note: You can play back a tape recorded in LP mode (Long Play)

INSERTING A CASSETTE

Insert the cassette in the direction as shown. Push in gently, but continuously, on the
center-back of the cassette until it is drawn into the VCR.
The VCR will automatically turn on.

REMOVING A CASSETTE

1) In the Stop mode, press EJECT button on the remote control or press STOP/EJECT
button on the VCR. The cassette will be ejected.
Recording/Playback Time
T120
1 hour
2 hours
3 hours
T160
2-2/3 hours
6 hours
8 hours
13

Advertisement

Table of Contents
loading

Table of Contents

Save PDF