Repair Instructions; Removing The Engine - Husqvarna Rider ProFlex 18 Workshop Manual
Hide thumbs
Also See for Rider ProFlex 18:
- Operator's manual (88 pages) ,
- Workshop manual (68 pages) ,
- Operator's manual (63 pages)
Table of Contents
Advertisement
For Husqvarna Parts Call 606-678-9623 or 606-561-4983
Repair Instructions
Removing the Engine
1.
Remove the engine cover.
2.
Loosen the battery's retaining strap.
Remove the protective cover.
IMPORTANT INFORMATION
Hold the battery cable bolts in place so that
the electrodes are not strained.
3.
Loosen the battery cable connections.
Then lift out the battery.
4.
Remove the cable connecting the starter
relay to the starter from the starter.
5.
Mark and remove the engine's electrical
connectors.
6.
Remove the clips holding the throttle and
choke cables. Unhook the cables from
their fasteners in the carburettor.
7.
Remove the hose clamp on the fuel hose
by the fuel pump and pull the fuel hose
downwards. Place the hose so that the
fuel does not leak out.
REPAIR INSTRUCTIONS
www.mymowerparts.com
Battery installation
Connections, to the left of the front of the engine
Throttle and choke cables
Fuel pump
8009-526
8009-190
8009-175
8009-191
27
English-
- Quick Links:
- Removing the Belt
- Replacing the Centre Belt
Hide quick links:
Advertisement
Table of Contents
