Lenovo S210/S210 Touch/S215/S215 Touch Hardware Maintenance
Manual
1130 Antenna assembly and LCD cover
For access, remove these FRUs in order:
• "1010 Battery pack" on page 35
• "1020 Hard disk drive" on page 37
• "1030 DIMM" on page 39
• "1040 PCI Express Mini Card for wireless LAN/WAN" on page 40
• "1050 Fan assembly and Heat Sink assembly" on page 42
• "1060 Keyboard" on page 44
• "1070 System board" on page 46
• "1080 LCD unit" on page 50
• "1090 Speakers, base cover, audio board, DC-IN board and power board" on
• "1100 LCD front bezel" on page 56
• "1110 LCD panel, LCD cable, hinges" on page 57
Figure 13. Removal steps of antenna assembly and LCD cover
Peel off the adhesive tapes securing the antenna boards, release the cables from
the cable guide, and then remove the antenna assembly in the direction shown
by arrows
When installing: Route the antenna cables along the cable guides and secure the
antenna boards with adhesive tapes. As you route the cables, make sure that they
are not subjected to any tension. Tension could cause the cables to be damaged
by the cable guides, or a wire to be broken.
60
page 52
a
.
a
a