Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
1
SERVICE MANUAL
Level 1&2
RM-368
Transceiver characteristics
Band:
GSM/EDGE 850/900/1800/1900
WCDMA 2100 (band I)/1900 (band II)/900 (Band VIII)
Display:
2,4" HVGA (320x480), 16M colours, Active area 33,6
mm x 50,4 mm
Keypad:
Multidimensional Navi Key
Camera:
Main camera: 5 Mpix, double LED Flash, Auto-focus,
Carl Zeiss optics
Secondary camera; VGA
Operating System:
S40 PR8.1
Connections:
2 mm charger, 2,5 mm AV connector, Bluetooth 2.0
EDR, USB 2.0 (Micro USB), GPS, WLAN 802.11g, Micro SD
Transceiver with BL-5F battery pack
Talk time
GSM:
Up to 4 hours
WCDMA:
Up to 3 hours
Confidental
Copyright © 2009 NOKIA. All rihts reserved
6260 Slide RM-368
Service Manual Level 1&2
Standby
Note
GSM:
Talk times are
Up to 300 hours
dependant on
WCDMA:
network
Up to 300 hours
parameters and
phone settings
ISSUE 1
Advertisement
Table of Contents
Related Manuals for Nokia Slide 6260
Summary of Contents for Nokia Slide 6260
- Page 1 GSM: GSM: Talk times are Up to 4 hours Up to 300 hours dependant on WCDMA: WCDMA: network Up to 3 hours Up to 300 hours parameters and phone settings Confidental ISSUE 1 Copyright © 2009 NOKIA. All rihts reserved...
-
Page 2: Table Of Contents
Battery information ................................8 7. Exploded view ..................................9 8. Service devices ..................................10 9. SW-update ....................................11 10. Disassembly instruction ..............................12 11. Assembly hints................................... 18 12. Solder components ................................20 Confidental ISSUE 1 Copyright © 2009 NOKIA. All rihts reserved... -
Page 3: Change History
Approved version 14.1.2009 The purpose of this document is to help NOKIA service levels 1 and 2 workshop technicians to carry out service to NOKIA products. This Service Manual is to be used only by authorized NOKIA service suppliers, and the content of it is confidential. Please note that NOKIA provides also other guidance documents (e.g. -
Page 4: Copyright
Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice. Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused. -
Page 5: Warnings And Cautions
3. Use only approved components as specified in the parts list. 4. Ensure all components, modules screws and insulators are correctly re–fitted after servicing and alignment. 5. Ensure all cables and wires are repositioned correctly Confidental ISSUE 1 Copyright © 2009 NOKIA. All rihts reserved... -
Page 6: Esd Protection
6260 Slide RM-368 Service Manual Level 1&2 ESD PROTECTION Nokia requires that service points have sufficient ESD protection (against static electricity) when servicing the phone. Any product of which the covers are removed must be handled with ESD protection. The SIM card can be replaced without ESD protection if the product is otherwise ready for use. -
Page 7: Care And Maintenance
Use only the supplied or an approved replacement antenna. Unauthorised antennas, modifications or attachments could damage the phone and may violate regulations governing radio devices. All of the above suggestions apply equally to the product, battery, charger or any accessory. Confidental ISSUE 1 Copyright © 2009 NOKIA. All rihts reserved... -
Page 8: Battery Information
Batteries’ performance is particularly limited in temperatures well below freezing. Do not dispose batteries in a fire! Dispose of batteries according to local regulations (e.g. recycling). Do not dispose as household waste. Confidental ISSUE 1 Copyright © 2009 NOKIA. All rihts reserved... -
Page 9: Exploded View
6260 Slide RM-368 Service Manual Level 1&2 EXPLODED VIEW Confidental ISSUE 1 Copyright © 2009 NOKIA. All rihts reserved... -
Page 10: Service Devices
For more information, refer to the Service Bulletin (SB-011) on NOKIA Online. Supplier or manufacturer contacts for tool re-order can be found in “Recommended service equipment” document on NOKIA Online. BL-5F Battery Confidental ISSUE 1 Copyright © 2009 NOKIA. All rihts reserved... -
Page 11: Sw-Update
Flash concept- (Point of Sales) To use the FLS-5 Flash Dongle, you have to followw the user guide inside the sales package. Please check always for the latest version of flash software, wich is available on Nokia Online. Confidental ISSUE 1... -
Page 12: Disassembly Instruction
Service Manual Level 1&2 DISASSEMBLY INSTRUCTION 1) Nokia 6260 SLIDE disassembly. 2) You must use the Nokia Standard Toolkit version 2. You will also need a DC plug. 3) To remove the BATTERY COVER, push the button on 4) Release the four clips holding the UI BOARD ASSY the bottom side and then lift up the BATTERY COVER. - Page 13 12) To disconnect the LCD flex, first open the locking mechanism of the connector with the SS-93. Then pull on the flex with the pliers. Be careful not to damage the connector. Confidental ISSUE 1 Copyright © 2009 NOKIA. All rihts reserved...
- Page 14 17) Remove the ANTENNA COVER ASSEMBLY in the 18) Use the SS-93 to detach the camera button. direction shown. Pay attention to not to damage the appendix of the assembly. Confidental ISSUE 1 Copyright © 2009 NOKIA. All rihts reserved...
- Page 15 SS-93 and then remove the engine board. now be removed. 23) Carefully pull out the USB PLUG. 24) Release the AV JACK and the DC JACK with the DC plug and remove them with the tweezers. Confidental ISSUE 1 Copyright © 2009 NOKIA. All rihts reserved...
- Page 16 ASSEMBLY. Lift up the assembly to get access to the connector. 29) Open MICRO SD PWB ASSEMBLY connector and 30) Carefully loosen up the adhesive on the MAIN FLEX remove the assembly. with the SS-93 as shown. Confidental ISSUE 1 Copyright © 2009 NOKIA. All rihts reserved...
- Page 17 31) Then pull the flex connectors carefully through 32) Continue loosening the adhesive until the main the gaps. flex can be completely removed. - END OF DISASSEMBLING - 33) The Nokia 6260 SLIDE disassembly is now complete. Confidental ISSUE 1 Copyright © 2009 NOKIA. All rihts reserved...
-
Page 18: Assembly Hints
5) Tighten the screws to the torque of 11Ncm in the 6) When placing the ANTENNA COVER ASSEMBLY, first order shown. attach the appendix. Then press the assembly down to attach the remaining clips. Confidental ISSUE 1 Copyright © 2009 NOKIA. All rihts reserved... - Page 19 Then press the MAIN KEYMAT edges to attach the rest of the clips. 9) Tighten the remaining screws to the torque of 14Ncm in the order shown. Confidental ISSUE 1 Copyright © 2009 NOKIA. All rihts reserved...
-
Page 20: Solder Components
6260 Slide RM-368 Service Manual Level 1&2 SOLDER COMPONENTS Solder components only for Level 2 V2400 X1550 V2401 G2200 X1400 X7402 X7401 S2419 S2415 X6399 X7403 F2000 X1700 Confidental ISSUE 1 Copyright © 2009 NOKIA. All rihts reserved...