Table of Contents
Advertisement
Quick Links
APPLICATION
The F111 (Series 1,2,3) Ceiling Media Air Cleaner is a media
air cleaner that uses either a single-speed or three-speed
direct drive forward curve blower motor with particle filter.
When equipped with CPZ™ modules (2), gases and odors are
adsorbed from the air passing through the unit. The air
cleaner removes airborne particles such as dust, soot, mold
spores, pollen and some cooking smoke from the air
circulated through the filter.
The Honeywell Trademark is used under license from Honeywell International
Inc. by Air-Pure Systems.
Honeywell International Inc. makes no representations or warranties with
respect to this product.
In Ceiling Media Air Cleaner
F111 (Series 1,2,3)
FEATURES
• High Efficiency Particulate Air (HEPA) filter models are
99.97% efficient and the hospital grade particle filter
models are 95% efficient at 0.3 micron particles. Both
models are more efficient on particles smaller and
larger. There is also a 95% ASHRAE model.
• Circulates up to 1250 cfm.
• Designed to overcome the increase in air flow
resistance normally caused by filter loading.
• White or black color cover to complement the ceiling.
• CPZ™ module removes up to 95% of the space odors
for up to 24 months.
• 3-Speed remote wall switch ( 3-speed models only)
• READ AND SAVE THESE
INSTRUCTIONS
Application.........................................................................1
Features ............................................................................1
Specifications ....................................................................2
Ordering Information .........................................................2
Planning the Installation ....................................................3
Installation .........................................................................4
Operation...........................................................................7
Service ..............................................................................8
Parts List ...........................................................................9
Limited Two-Year Warranty ...............................................12
PRODUCT DATA
Contents
68-0198-2
Advertisement
Table of Contents
Related Manuals for Honeywell F111 Series 3
Summary of Contents for Honeywell F111 Series 3
-
Page 1: Table Of Contents
The Honeywell Trademark is used under license from Honeywell International Inc. by Air-Pure Systems. Honeywell International Inc. makes no representations or warranties with respect to this product. -
Page 2: Specifications
ORDERING INFORMATION If you have additional questions, need further information, or would like to comment on our products or services, please write or phone: 1. Your local Honeywell Commercial Air Products Distributor. 2. Air-Pure Systems 16873 Fish Point Rd. SE Prior Lake, MN 55372 www.cleanairfacility.com... -
Page 3: Planning The Installation
LINE M11996A If any questions should arise concerning determining the number of air cleaners needed for an area, consult your distributor or local Honeywell Commercial Air Cleaner Distributor. Table 4. Determining the Minimum Number of Space Volume (L x W x H) in Cubic... -
Page 4: Installation
Fig. 2. Correct positioning of the air cleaner for optimum cleaning. The air cleaner is designed to be suspended centrally in a space and mounted into or on a ceiling. The cleaning footprint of the air cleaner is rectangular with air patterns that move clean air to the corners of the area while drawing contaminated air up from the center of the area. - Page 5 EXTERNAL WIRING BY INSTALLER Fig. 4. Typical F111 Series 3 only 120V, 60 Hz or Mount Air Cleaner Cabinet The air cleaner can be mounted in a drop ceiling system or hung in an open area. Both mounting methods require the air cleaner to be level and positioned facing downward for correct operation.
- Page 6 13. For Series 2 and 3 only. Be sure both catches are turned down and filter rests firmly on catches. 14. Install the prefilter in the air cleaner lid. Position the metal screen mesh so it is facing upward when the lid is closed.
-
Page 7: Operation
14. Connect one wire on air cleaner to power supply wire with a wire nut following color code used at remote switch. (White) 15. Connect the ground wire from the remote switch to a ground stud of the wiring compartment cover.(Green) 16. -
Page 8: Service
The impurities are collected until the adsorbents reach saturation. At saturation, the adsorbents emit a continuous strong pungent odor. If the air cleaner is turned off for 8 to 10 hours, there will a temporary odor when it is turned back on. If the odor persists for 30 minutes, it is time to replace the filters. -
Page 9: Parts List
Spring Loaded Plunger Lid assembly with hinges and latches in Black Color NOTE: All replacement filters must be provided by Air-Pure Systems to maintain U.L. Certification and Warranty. F111 (SERIES 1,2,3) IN CEILING MEDIA AIR CLEANER Table 5. Replacement Parts. Description... - Page 10 F111 (SERIES 1,2,3) IN CEILING MEDIA AIR CLEANER Fig. 9. Exploded view of F111 (series 1,2,3) in Ceiling Media Air Cleaner components. 68-0198-2 Revised 5-09 CABINET ASSEMBLY SORBENT MEDIA MODULE (2 REQUIRED) BLOWER WHEEL MOTOR CAPACITOR MOTOR MEDIA FILTER PREFILTER...
- Page 11 F111 (SERIES 1,2,3) IN CEILING MEDIA AIR CLEANER NOTES 68-0198-2...
-
Page 12: Limited Two-Year Warranty
LIMITED TWO-YEAR WARRANTY Air-Pure Systems warrants its air cleaner products to be free from defects in workmanship or materials under normal use and service, for a period of two (2) years from the date of purchase by the original end-user. If at anytime during the warranty period the product is defective or malfunc- tions, Air-Pure Systems, through the distributor or dealer, from which the product was purchased, or through an authorized warranty repair station, shall at Air-Pure Systems option, replace or repair the defective product or component.