• REMOVAL OF ANODE-CAP
Note:
• After removing the anode, short circuit the anode of the picture tube and the anode cap to the metal chassis, CRT
shield or carbon paint on the CRT.
•
REMOVING PROCEDURES
a
a
1 Turn up one side of the rubber cap in the direction
indicated by the arrow a.
b
2 Using a thumb pull up the rubber cap firmly in the direc-
tion indicated by the arrow b.
3 When one side of the rubber cap is separated from the
•
1 Do not damage the surface of anode-caps with
2 Do not press the rubber too hard so as not to
b
3 Do not turn the foot of rubber over too hard.
– 9 –
anode button
anode button, the anode-cap can be removed by
turning up the rubber cap and pulling it up in the
direction of the arrow c.
HOW TO HANDLE AN ANODE-CAP
sharp shaped objects.
damage the inside of anode-cap.
A metal fitting called the shatter-hook terminal is
built into the rubber.
The shatter-hook terminal will stick out or damage
the rubber.
KV-AR25M81A
c
RM-952