hit counter script
Makita 3709 Instruction Manual
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Trimmer
  5. 3709
  6. Instruction manual

Makita 3709 Instruction Manual

Hide thumbs Also See for 3709:
Table of Contents

Advertisement

Quick Links

See also: Instruction Manual
INSTRUCTION MANUAL
Trimmer
3709
006612
DOUBLE INSULATION
WARNING:
For your personal safety, READ and UNDERSTAND before using.
Save These Instructions FOR FUTURE REFERENCE.
1

Advertisement

Table of Contents
loading

Related Manuals for Makita 3709

Summary of Contents for Makita 3709

  • Page 1 INSTRUCTION MANUAL Trimmer 3709 006612 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

  • Page 2: Specifications

    ENGLISH SPECIFICATIONS Model 3709 Collet chuck capacity 6 mm or 1/4" No load speed (min 30,000 Overall length 199 mm Net weight 1.5 kg Safety class • Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
  • Page 3 If operating a power tool in a damp location is 20. Store idle power tools out of the reach of unavoidable, use a ground fault circuit children and do not allow persons unfamiliar interrupter (GFCI) protected supply. Use of an with the power tool or these instructions to GFCI reduces the risk of electric shock.

  • Page 4: Functional Description

    FUNCTIONAL DESCRIPTION 10. Before using the tool on an actual workpiece, let it run for a while. Watch for vibration or wobbling that could indicate improperly CAUTION: installed bit. Always be sure that the tool is switched off and • Be careful of the bit rotating direction and the unplugged before adjusting or checking function on feed direction.
  • Page 5 Installing or removing trimmer bit 1. Feed direction 2. Bit revolving 1. Loosen direction 2. Tighten 3. Workpiece 3. Hold 4. Straight guide 001985 006615 NOTE: When using the trimmer shoe, the straight guide or CAUTION: • the trimmer guide, be sure to keep it on the right Use only the wrenches provided with the tool.
  • Page 6 the templet and move the tool with the templet guide 1. Clamp screw (A) sliding along the side of the templet. 2. Straight guide 3. Wing nut 1. Bit 4. Base 2. Base 3. Templet 4. Workpiece 5. Templet guide 006624 Attach the straight guide with the clamp screw (A).
  • Page 7 For cutting circles between 121 mm and 221 mm in 1. Clamp screw radius. 2. Adjusting screw 1. Wing nut 3. Clamp screw 2. Guide plate 3. Straight guide 4. Trimmer guide 4. Center hole 5. Bolt 006621 When cutting, move the tool with the guide roller riding 006620 the side of the workpiece.
  • Page 8 Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. 005118 Router bits Straight bit 1/4" 006454 Drill point flush trimming bit 005116 1/4"...
  • Page 9 Drill point double flush trimming bit Cove beading bit 005121 005129 1/4" 006488 006464 Corner rounding bit Ball bearing flush trimming bit 005125 005130 1/4" 1/4" 1/4" 006465 006489 Ball bearing corner rounding bit Chamfering bit 005131 005126 1/4" 006466 006462...
  • Page 10 Ball bearing chamfering bit Ball bearing roman ogee bit 005132 005135 1/4" 006470 006467 Ball bearing beading bit 005133 006468 Ball bearing cove beading bit 005134 006469...
  • Page 12 Makita Corporation 884629A8...

Table of Contents

Save PDF