Install The Sfp Gigabit Interface Converter Module - Cisco 7301 Quick Start Manual

Hide thumbs Also See for 7301:

Table of Contents

Install the SFP Gigabit Interface Converter Module

Warning

Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into beams or view

directly with optical instruments. Statement 1051

Warning

Class 1 laser product. Statement 10008

Warning

Class 1 LED product. Statement 1027

Warning

During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly touch the

backplane with your hand or any metal tool, or you could shock yourself. Statement 94

Only three of the six Gigabit Ethernet ports may be used at the same time.

•

The Gigabit Ethernet small form-factor pluggable (SFP) GBIC module supports online insertion and removal (OIR).

•

The native fiber optical Gigabit Ethernet ports and the RJ-45 Gigabit Ethernet ports are reported as GigabitEthernet 0/0,

GigabitEthernet 0/1, and GigabitEthernet 0/2 in software. You must use the media-type command to select which media type

you want to use before you configure these ports. See page 24.

Figure 2

Identifying SFP GBIC Module Latches

Sliding latch

Hinged and sliding latch

Different manufacturers have different types of latching mechanisms for Gigabit Ethernet SFP GBIC modules. There is no

correlation of the type of latch to the model (such as SX or LH) or technology type (such as Gigabit Ethernet) of SFP GBIC

modules. See the label for the SFP technology type and model. The SFP GBIC modules use LC-type connectors.

Hinged latch

Table of Contents