Table of Contents
Advertisement
Cisco ASR 1000 Series Router Power Supplies
LED Label
LED
FAN OK
A bi-color LED
indicates power
supply fan status
OUTPUT FAIL Power supply
activity
DC Power System Input for Cisco ASR 1004
The DC power supply operates within specification from –40.5VDC to –72VDC continuously once the
the power supply DC input turn on threshold of –43.5V has been reached.
input ranges for reference only.
Table 2-15
Voltage Range (VDC)
Domestic
International
AC/DC Power System Output for Cisco ASR 1004
The power supply output tolerance is defined in
Total system consumption per power supply should not exceed 735 W.
Table 2-16
Output Voltage
Minimum
Nominal
Maximum
Output Current
Minimum
Maximum
Power Supplies for Cisco ASR 1002 Router
The Cisco ASR 1002 Router supports an AC or DC power supply:
•
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide
2-26
Color
Green
Red
Red
Cisco ASR 1004 Router DC Power System Input
Cisco ASR 1004 Router Power System Output Voltage and Current
Cisco ASR 1002 Router AC Power Supply, page
85VAC and 264VAC. AC power input is an IEC 320-type power inlet, 15A service connector. The
AC input side contains a front panel with provisions for mounting screw, two built-in handles to
extract the power supply, three status LEDs, and fans for power supply and system cooling.
Chapter 2
Description
The LED illuminates s green when all fans are operational.
The LED illuminates red when a fan failure is detected.
When the LED is off, it signals that the DC output voltage are within
the normal operating range. Output voltage between the minimum and
maximum limits will not create an output fail alarm, and output
voltages below the minimum or above the maximum will create an
Output Fail alarm.
When you turn the power supply on, the red LED illuminates for two
to three seconds to test LED operation before going off.
Minimum
–40.5
–55
Table 2-16
+12 VDC
11.80 VDC
12.00 VDC
12.20 VDC
2.80 A
61.44A
2-27—The AC power supply operates between
Cisco ASR 1000 Series Routers Components
Table 2-20
shows the common
Nominal
Maximum
–48
–56
–60
–72
under all combinations of line variation.
+3.3 V
3.20 VDC
3.30 VDC
3.40 VDC
0.10 A
3.125 A
OL-13208-01
Advertisement
Table of Contents
