Motorola GP380 User Manual
Professional radio
Hide thumbs
Also See for GP380:
- Specifications (2 pages) ,
- Service information (108 pages) ,
- Basic service manual (60 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Motorola GP380
Summary of Contents for Motorola GP380
- Page 1 Professional Radio GP380 User Guide 68P64110B28A Issue: June 2000...
-
Page 3: Table Of Contents
CONTENTS Radio Overview ....3 Radio Operation....18 Operation and Control Functions . - Page 4 Safety Information ....55 programmes stored in semiconductor memories or other media. Laws in the United States of America and other countries preserve for Motorola Europe and Motorola Inc. certain exclusive rights for copyrighted computer Safe and Efficient Operation .
-
Page 5: Radio Overview
Green: Successful power up. Green Flashing: Radio scanning. This user guide covers the operation of the Red: Radio transmitting. GP380 Professional Portable Radio. Red Flashing: Channel busy - when receiving. Please read pages 55 to 57 before using this radio Yellow: Radio called. - Page 6 Feature Description Monitor allows user to select between signalling squelch, carrier squelch and unsquelch, and to suspend scan when Monitor/Cancel landed on a channel in scan mode. Cancel allows user to cancel current incoming or outgoing call. Radio Call To make an individual or group selective call. Allows user direct access into the Missed Call List menu Missed Call List feature.
- Page 7 Feature Description To delete a nuisance (unwanted) channel when scanning, Nuisance with exception of priority channel, last channel in scan list Delete/Cancel and home channel. (Voice Storage) Cancel, deletes messages being played back from the Voice Storage feature. To delete a nuisance (unwanted) channel when scanning, Nuisance Delete with exception of priority channel, last channel in scan list and home channel.
- Page 8 Feature Description To transfer calls automatically to another radio if user is Call Forward unable to take the call. To increase the gain of the radio microphone to allow user Whisper to speak quietly. To toggle between compression/expansion of audio signal Companding On/Off and normal audio signal.
-
Page 9: Keypad Keys
Keypad Keys Keypad Lock/Unlock On your radio there is a keypad lock feature which 1 2 3 allows you to lock the keypad keys and menu keys to eliminate accidental key presses. 4 5 6 Press the keypad lock button to lock the keys, the 7 8 9 display icon L will be lit and the display will show: Lock Keypad... -
Page 10: Menu Keys
Menu Keys Menu/ Exit Select Left Down Right Menu/Select Key c Used to enter the Menu Mode. When you are in the Menu Mode, this key is also used to make menu selections. Note: When the radio is in the IDLE STATE, press- ing any of the six menu keys causes the radio to enter the Menu mode. -
Page 11: Menu Navigation Chart
Menu Navigation Chart (Refer to Menu Navigation guidelines— lower, left-hand corner of this page) Missed Voice Utilities Status Channel Radio Contact Calls Storage Information List select/ select/ select/ select/ enter ID enter ID enterID on/off Channel No. status/ voice/ Scan SW Version DTMF CP Version... -
Page 12: Lcd Display And Icons
LCD Display and Icons Symbol Name and Description Scan Indicator Indicates that you are scanning. The dot is lit during priority scan mode. Keypad Lock Indicator On indicates that the keypad and menu Displays channel, menu, and radio status keys are locked. Off indicates unlocked. information. -
Page 13: Audio Signal Tones
Audio Signal Tones Tone Signal Description High pitched tone Low pitched tone Radio receives an Individual Call Individual Call. Tone Signal Description Call Reminder of Reminder unanswered call. Power up OK Radio self-test OK. Warns of expiry of Power up Fail Radio self-test fail. - Page 14 Tone Signal Description Reminds lone worker Lone Worker to respond. Battery below receive Battery threshold level. Hardware error, tone Hardware continues until valid Error operation. Previous message or message currently Cancel being played from Message Voice Storage has been deleted. Channel Free Indicates current Beep...
-
Page 15: Getting Started
• For optimum battery life and operation use only radio, turn the radio off to ensure a full charge. Motorola brand chargers. They were designed to • The battery should be at about 25°C (room operate as an integrated energy system. -
Page 16: Recycling Or Disposal Of Batteries
The P icon flashes when the battery is flat Battery chargers will charge only the Motorola and the hardware error tone will sound. This icon authorized batteries listed below; other batteries will only appear when a genuine Motorola battery will not charge is used. Part No. -
Page 17: Accessory Information
ACCESSORY INFORMATION Attaching the Battery Removing the Battery Battery Latches Slots Turn off the radio, if it is turned on. Fit the extensions at the bottom of the battery into the slots at the bottom of the radio’s body. Slide the battery latches, on both sides of the battery, downwards. -
Page 18: Attaching The Antenna
Attaching the Antenna Removing the Antenna Align the threaded end of the antenna with the Turn the antenna counterclockwise until you radio’s antenna connector. can remove it. Turn the antenna clockwise to fasten it. English... -
Page 19: Attaching The Belt Clip
Attaching the Belt Clip Removing the Belt Clip Belt Clip Tab Align the grooves of the belt clip with those of Use a key to press the belt clip tab away from the battery. the battery. Press the belt clip downwards until a click is Slide the belt clip upwards to remove it. -
Page 20: Radio Operation
RADIO OPERATION Radio On Message Turning the Radio On or Off At power up the radio will display a message customised by your dealer, e.g.: Radio On After this text has been displayed, the radio perform a self test routine. On completion of a successful self test the radio will display: Channel This may be a number or an alias and will be the... -
Page 21: Selecting A Radio Channel
Selecting a Radio Channel Once in channel mode, there are three ways to select a channel: Your radio offers up to 255 channels, however some may not be programmed. Check with your dealer for Method 1 more information. Turn the rotary knob (1) clockwise or counterclock- wise until you reach the desired channel indicated Before selecting a channel ensure your radio is in on the display. -
Page 22: Sending A Call
Note: The keypad can’t be used to enter the channel Receiving a Call number during a call or whilst the radio is in a Turn your radio on and adjust the volume level. scan. Switch to the desired radio channel. If, at any time, a call is received you will hear Sending a Call the call at the volume level you have set. -
Page 23: Radio Calls
RADIO CALLS To answer the call: Press the PTT button or Call button. SELECTIVE CALLS The call will terminate automatically when Making a Selective Call the conversation has ended or press the You can make a selective call to a particular radio, Monitor button. -
Page 24: Contact List
CONTACT LIST Once in the Contact List, there are three ways to choose the desired address: When the radio is in the IDLE state or during a call, the contact list may be used to give access to up to Method 1 255 preprogrammed numbers accessed via the Turn the rotary knob (1) clockwise or counterclock-... -
Page 25: Keypad Edit
Once the desired address is displayed, there are Keypad Edit two methods to select the address: If the radio is displaying a Contact List number, a Method 1 Keypad Dialled number or a Status number, the last digit may be deleted by: c to confirm your selection. -
Page 26: Missed Calls
To view the calls in the list via the menu MISSED CALLS If a call remains unanswered, the call will be to enter Menu Mode. stored by the radio, provided that Missed Calls has been programmed into your radio. Display shows: Missed Calls Up to ten calls can be stored. - Page 27 Example: You can call back to any number in the Missed Call list by: Display shows Reception until If the displays shows S there is a status message desired number is associated with the call. Addr: Alias displayed: Displays message e.g. PTT button or to make the call.
- Page 28 On a successful call set- up, the entry is On deletion of the last message in the Missed automatically deleted from the stack together Calls list, the radio will exit the menu and return with any associated status message. to the IDLE STATE. Unanswered calls may be deleted from the To exit the Missed Call List: Missed Call list at any time by :...
-
Page 29: Status Calls
STATUS CALLS to select A status is a code for transmitting prearranged messages, e.g. status “05” may indicate Once in the Status List, there are three ways to “Return to Base”. The prearranged messages choose the desired status: and associated code digits are contained in a Method 1 Status List which contains up to 255 entries. -
Page 30: Receiving A Status Call
Once the desired status is displayed, there are two Receiving a Status Call methods to select the status: Your radio receives a Status Call when: Method 1 Individual Call alert c to confirm your selection. sounds Display shows: Selected Display shows: Stat: On Break (for 2 seconds) Stat: 04... -
Page 31: Emergency Calls
EMERGENCY CALL You may pre-record a message (for example to confirm your location or status), which is sent Your radio can be programmed to give you a automatically when the emergency call is one-button quick access to call a particular activated. -
Page 32: Dtmf
DTMF To initiate a DTMF call with Automatic Telephone Interconnect Call DTMF means Dual Tone Multi Frequency and is used when the radio is required to operate in Press dedicated Call Button (Call 1-4 or PTT), a radio system with an interface to telephone you will hear a tone sequence. - Page 33 To initiate a DTMF call with Manually To end the call press the Monitor Button or Dialled Telephone Interconnect Call change channel when the clear down call is sent automatically from your radio to shutdown Enter the interconnect call from the keypad, the phone line.
- Page 34 Once the radio has connected to the called number, you can begin the conversation. Even though this is a phone call, your conversation mimics a radio call, that means that both parties speak in turn, i.e. press the PTT to talk, release to listen.
- Page 35 Permanent DTMF Mode Using the Menu Press the pre-programmed DTMF button once, to Ensure radio is in IDLE STATE. put the keypad into permanent DTMF live dial mode. Press the DTMF button again to disable the DTMF to enter Menu Mode. live dial.
- Page 36 To initiate a DTMF call in permanent live To end the call press the Monitor Button or dial change channel when the clear down call is sent automatically from your radio to shutdown Enter the interconnect call from the keypad, the phone line.
-
Page 37: Features
FEATURES to remain in Emergency Message Feature VOICE STORAGE Press and hold the Record/Playback button, Voice storage allows you to perform various the Voice Storage Recording alert sounds voice related tasks which include voice momentarily. recorder and an emergency message feature. Voice Recorder 10 Record the call or part of the call. - Page 38 To record a memo: 10 The Voice Storage Full alert sounds when the memory is full and recording ceases. Ensure radio is in IDLE STATE. You will see: Storage Full to enter Menu Mode. 11 Release the Record/Playback button at any until: Voice Storage time to stop recording.
- Page 39 To playback a recorded call or memo: Ensure radio is in IDLE STATE Press the Record/Playback button to playback the first recorded call or memo. You will see: Playing Press the Record/Playback button again to skip to the next message to be played back. To delete a recorded call or memo: Playback message as described in above procedure.
-
Page 40: Emergency Message
Emergency Message to remain in Voice Recorder feature You can pre-record an emergency message to be sent automatically when the emergency call Press and hold the Record/Playback button, feature is activated. This message may the Voice Storage Recording alert sounds contain, for example, your location or status momentarily. -
Page 41: Utilities
UTILITIES DTMF DTMF means Dual Tone Multi Frequency and The utilities described below are programmed is used when the radio is required to operate in into your radio by your dealer and are a radio system with an interface to telephone accessible either via a programmable button or systems. -
Page 42: Scan
SCAN Using the Scan Button You can monitor several channels in order to Press the Scan button to start scanning. The scan start alert tone will sound receive any call that is transmitted on any of and the display icon lit . - Page 43 Using the Menu The scan start alert tone will sound, the display icon G will be lit and the LED indicator will Ensure radio is in IDLE STATE, or in a call. blink green during a scan operation. When a call on a channel is detected the LED will stop to enter Menu Mode.
- Page 44 DELETING A NUISANCE CHANNEL ADDING A DELETED NUISANCE CHANNEL BACK INTO THE SCAN LIST If a channel continually generates unwanted calls/ noise (a “nuisance” channel), you can temporarily Using the Scan Button remove it from the scan list by performing a Press the Scan button to stop scanning.
-
Page 45: Call Forward
CALL FORWARD Using the Menu You can call forward calls to your radio to Ensure radio is in IDLE STATE. another radio if you are unable to take calls or are away from your radio. to enter Menu Mode. You can switch On or Off Call Forward by until: Utilities using a pre-programmed Call Forward button... -
Page 46: Talkaround
TALKAROUND Using the Menu In your communications network, you may be using Ensure radio is in IDLE STATE. a system to cover a larger area than is possible with your radio. However, you can communicate with to enter Menu Mode. another radio within your radio’s range without until: Utilities... -
Page 47: Whisper
WHISPER Using the Menu Whisper allows you to talk quietly into the radio Ensure radio is in IDLE STATE. microphone when making a call, by increasing the gain of the radio microphone. to enter Menu Mode. You can switch On or Off Whisper by using a until: Utilities pre-programmed Whisper button or via the... -
Page 48: Lone Worker
LONE WORKER Using the Menu The Lone Worker feature enables you to work Ensure radio is in IDLE STATE. alone with added safety. to enter Menu Mode. You can switch On or Off Lone Worker by using a pre-programmed Lone Worker button until: Utilities or via the menu. -
Page 49: Power Level
POWER LEVEL Using the Menu You can transmit your calls at different transmit Ensure radio is in IDLE STATE. power levels. A higher level means you can reach a radio that is farther away. A lower power to enter Menu Mode. level conserves battery power. -
Page 50: Companding
COMPANDING Using the Menu Companding is a collective term to define Ensure radio is in IDLE STATE. compressing the audio signal on transmission and expanding the audio signal on reception. to enter Menu Mode. The overall effect is to reduce noise in the until: Utilities received signal, giving you crisper, clearer... -
Page 51: Backlight
BACKLIGHT Using the Menu Backlight illuminates the radio display, keypad Ensure radio is in IDLE STATE. and menu navigation keys. to enter Menu Mode. Your radio can be programmed to have the backlight permanently on, permanently off or a until: Utilities timed period, when any new information being displayed, causes the backlight to remain on... -
Page 52: Option Board
OPTION BOARD Using the Menu Your radio is capable of being fitted with an Ensure radio is in IDLE STATE. option board. Each board will extend the capability of your radio by adding a new feature to enter Menu Mode. such as voice storage, voice scrambler or until: Utilities... -
Page 53: Voice Operated Transmit (Vox)
VOICE OPERATED TRANSMIT (VOX) When the VOX headset/microphone is connected, your radio may be used with hands-free operation. The VOX feature intelligently senses background noise, so that it adapts automatically to the noise level in the environment in which you are working. To start the VOX feature: Connect the VOX headset onto the accessory connector of the radio. -
Page 54: Stun/Unstun
STUN/UNSTUN For added security and to avoid abuse of the radio system in which you operate, a feature known as Stun/Unstun is included in your radio. This feature can only be activated by your system manager or administrator. For example, if your radio is stolen and is being used illegally, your system administrator can send a signal which will stun the radio making it incapable of being used. -
Page 55: Radio Information
RADIO INFORMATION To access Radio Information Ensure radio is in IDLE STATE. To enable you and your dealer/system administrator to establish, quickly, the software to enter Menu Mode. and radio parameters programmed into your until: Radio Info radio, a feature known as Radio Information can be accessed via the menu. - Page 56 SW Version further selections CP Version following steps 6 and 7: SW Part No CP Part No to exit menu mode , display shows e.g.: Chan: 05 English...
-
Page 57: Safety Information
Two-Way Radios • European Committee for Electrotechnical This section provides information and instructions for Standardisation (CENELEC): the safe and efficient operation of Motorola Portable and Mobile Two-Way Radios. • ENV. 50166-1 Human Exposure to Electro- 1995 E magnetic Fields Low Fre-... -
Page 58: Radio Operation And Eme Exposure
Portable Radio Operation and Operational Warnings EME Exposure When transmitting with a portable W A R N I N G Vehicles With an Air Bag radio, hold the radio in a vertical MAN WITH RA position with its microphone 2.5 to 5 Do not place a portable radio in the area over an air centimeters (1 to 2 inches) away from your mouth. -
Page 59: Blasting Caps And Areas
Blasting Caps and Areas Batteries To avoid possible interference with blasting All batteries can cause property damage and/or operations, turn off your radio when you are near bodily injury such as burns if a conductive material electrical blasting caps, in a blasting area, or in such as jewellery, keys, or beaded chains touch areas posted: “Turn off two-way radio.”... - Page 60 NOTES English...