Table of Contents
Advertisement
The TransNET Configuration Software provides access to all of the radio's
capabilities with the benefit of context-sensitive help. The program is shipped
as part of the TransNET support CD included with every order (CD P/N
03-2708A02)
6.2 User Commands
A series of tables begin on the next page that provide reference charts of
various user commands for the transceiver. See
tions" on Page 28
Entering Commands
The proper procedure for entering commands is to type the command,
ENTER
followed by an
command is followed by
.
ENTER
then
Table 7. Network Configuration—Master Station
COMMAND
AT [ON, OFF]
Details Page 29
BUFF [ON, OFF]
Details Page 30
FEC [ON, OFF]
Details Page 33
HOPTIME [7, 28]
Details Page 34
LPM [1, 0]
Details Page 36
REPEAT
Details Page 38
RETRY [0–10]
Details Page 38
SAF [ON, OFF]
Details, Page 40
SKIP [NONE, 1...8]
Page 41
MDS 05-2708A01, Rev. F
for more details.
keystroke. For programming commands, the
SPACE
, the appropriate information or values, and
DESCRIPTION
Enables Master station to emulate a modem
and respond to AT commands
ON = Seamless data
OFF = Fast byte throughput.
Sets/disables FEC
(Forward Error Correction) setting.
Displays hop-time or sets it to 7 or 28 ms.
Used at Master to set all associated stations
in an energy-conservation mode.
1 = Low-power mode enabled network-wide
0 = Disable low-power mode (Default)
Sets/displays the fixed downstream re-send
count.
Sets/displays the maximum upstream re-send
count for ARQ (Automatic Repeat Request)
operation
Enables/disables the store-and-forward func-
tion for the network controlled by this Master
unit.
Skip one or more frequency zones
Details,
MDS TransNET Ref. Manual
"Detailed Command Descrip-
23
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
